Motorcycle Side Mirrors Round 7/8" Handle Bar End Compatible With Street Bike Cafe Racer Sports bikes Chopper Cruiser Sport FZ8 FZ-07 09

I have to say, i really like these mirrors especially for the attractive price. There are a couple things i really like about them, they are very solid, and well made for the low price point. The convex mirror allows for a wide angle that is very informative at a glance. I like the multiple mounting options presented, just leave things a little loose and see how the different configurations work for you. I removed the outer 3/4 sleeve and washer, and used the smaller insert to fit inside of my pro taper bars i installed on my mt07. By tightening the nut and expanding it slightly before inserting in the bar, you can set your fitment and depth, and get the insert to grab inside of the bar. I used loctite 609 retaining compound around the outside of the of the plug, and blue loctite for the bolts and set screws. I have been on two long rides since installing them and they have not come loose at all. I highly recommend these mirrors for any 7/8 bars you have. don’t overspend on high dollar brands peddling you the same quality of stuff as these bar ends.

I honestly don't have anything bad to say about them given the price. They fit my 08 SV650 with no issues and I can see behind me now. They are more like those parabolic bling spot mirrors that people put in the bottom corner of their car mirrors making cars look smaller and further away then they appear. The positive of that is you get a wider field of view and can see your blind spots. Make no mistake they are cheap mirrors and I don't know how long they will last or if the steel parts will rust but as of now, I am satisfied given the price point.

I refuse to pay for yet another set. This is my 2nd pair. Yes, they look good, but damn it, no sense of looking good parked, they have to look good driving. They flop around regardless of how you tighten them. It is simply not secure. I have been back and forth to Lowe's and Home Depot because they don't come with the installation requirements. Makes no sense to invest in the look just to have them crack or a good gust of wind (going more than 80mph) and they will fly off. it also becomes a liability. It can fly off and become a scary road debris for someone behind you. to the manufacturers of this product. Spend more time with the quality, not so much on the looks and selling in quantity. Look at your bad review. Make the change!

Well I'm impressed, these little babies are not bad at all for the price, compared to the other mirrors. Now I used my old hardware from the other bar end mirrors. (Worked perfectly) The hardware that comes with the mirrors are not for 7/8" bars. It will take some time to get them adjusted, once I did you can see perfectly. They do not vibrate at high speed (106mph). All in all they are a great buy, just don't think you are going to slap them on and go, because it takes time to get them just right.

The diameter of the aluminum expansion mechanism is 14.95mm. They are barely adequate for 3/4 inch handlebars. Unusable for 7/8 inch handlebars. They fall out. I made new expansion slugs on my lathe with a diameter of 18mm. This solved the problem. Aside from the mount being improperly made, these mirrors are fantastic. Very little vibration (after the fix) and a clear image are what I like about them. Plus, they look great.

This is the second set I've had of these they work great multiple adjustability multiple mountability and very durable only reason I got another set is because I literally broke the lens on one and if you buy multiple sets you have parts that are interswapping as long as you get the same color PS they do fade easily So if you do swap out parts give it a month or 2 in the sun it'll be the same color

I prefer these over the stock mirrors. The positives is it gets the stock mirrors out of your way so you can lean forward on the tank while on the freeway and have more vision. Plus I do think they make the bike look more aggressive. The cons is they are a pain to install and dropping the bike knocks them out of place but that's a given with bar ends mirrors. You have to make sure they catch in the handlebar, then secure the mirror base, and finally adjust the mirror to achieve the proper angle. Many times the bar ends would spin or get loose as you tried to adjust one of the three. Once you have them set though they seem solid and as long as you don't death grip you don't feel much vibration. If you drop the bike they can come loose as the force will reset either the mirror, the base, or the bar end.

Fast shipping. Lots of ways to mount em. Looks amazing. Great quality and great price! Just be careful not to tighten them to much or the metal will crack. Finally took the massive bug antenna mirrors off the Z800 and couldn’t be happier!

Sin completamente de metal, son pequeños pero tienen buena periferia, fácil de instalar, excelente compra

On point w looks, ease to install and came quick. Bang for your buck there. High speeds your gonna have them move considerable amounts. But it seems a bar end thing. Friends all have the same issue.

I had just received in the mail - 2 right mirrors and no left mirror. One of the right mirrors is also cracked. Can i please be resent one left mirror so i can actually install these and use them THANK YOU

These are good quality for the money, I needed to add a rubber bushing for a tight fit one an XSR900 but it worked. Look great and for once I am taking the time to recommend a product from Amazon!

They look okay but are useless soon as you start going 70km the mirror moves all around don't waste your money