TP-Link Tri-Band BE9300 WiFi 7 Router Archer BE550s6-Stream 9.2Gbps | Dual Ports | USB 3.0 | 6 Smart Internal A

Great router, way more powerful wifi signal than my replaced Asus ROG BE98. Only issue was the IoT network is flakey, but just setting up a guest network with the same SSID and credentials, then deactivated the IoT broadcast, fixed all issues and I'm never seeing a single drop out any more.

They need to break up reviews based on models... BE24000 A month in and I'm very happy so far. Long time netgear nighthawk user and while some worked better then others the newer versions have been spotty. I purchased the latest and greatest (RS700s) at about the same price as this 24000. Tested great and 5min later slowed, rebooted or plain disconnected. Done with Netgear for good. I can't find the number of devices "supported". Other brands list up to 20,40,200 etc. I have between 35 and 45 devices connected at a time, while many use limited bandwidth my worry was the sheer number of devices were causing some of my issues. No problems with this. User interface, app, ip site and even led screen on the device itself are easy to interpret and user friendly. Preferred over the netgear option. I consistently run at 25% ram on the router (2gb, highest I've seen on a router). Download speeds heavily rely on distance to router and band you're on. I get close to 1g down and up on a fiber network through wireless on my phone in both the 5G and now 6G. You're able to split up channels with 1x 2.4G 2x 5G and 1x 6G or merg them, they can be named the same or seprate with passwords. I tried MLO network feature, worth reading up on (multi link operation) but it seemed to throw off my smart devices, many of which only function on a 2.4 channel. Pretty customizable by end user with limited tech savy. The IoT network is a nice idea but I don't use it. Qos is also nice and available on most routers now but unnecessary if your IP maintains 400mbps speeds. I do use it on 3 devices but doubt it affects much. Reception is also a win.. on my furthest devices I was getting 40-70% signal with older routers and this is above 75 at all times. This includes the RS700s returned router at this price point which was abysmal even a room away. The Mesh networks which this 24k claims to support may be good but 1 single router simplifies the process and should be pretty stable and strong depending on building for up to the stated 2500sqft. At 2k my house is fully supported and the hassle I had with range extenders (netgear) in the past is something I wanted to avoid. Looks good, screens cool.. So far it functions flawlessly and thats how I choose a router.

If you are looking for a cost-effective router that will put you ahead of the technology time-line, this is it. I was a LinkSys/Cisco fan and I bought this router to replace a pretty decent LinkSys WRT 3200 ACM. The LinkSys acquired some deficiency in the past year of "half-connecting" to just one device, while perfectly connecting to every other device on its 2.4gz and 5.0gz bands. (Half-connecting allowed some, but not all URLs to load). I recently had replaced a LinkSys extender with a TPLink extender because it could not maintain a persistent connection with the LinkSys (another hint the router was going out) and was pleased with its ability to retain its connection... though it seemed I was frequently fighting over channels with my neighbors which was very annoying, having to change them every other week. After researching the market (I looked at Eero, too), I decided this was the one that was budget friendly and buying a more expensive model was not warranted as I'm not a gamer or an extreme streamer - I have 1gz service from Spectrum anyway. I did look for a router that supported USB as I have a couple of USB drives (12gb) for "cloud" storage of my files. This router comes with "Easy Mesh" which I did not pay that much attention to, since the new TpLink extender was doing a nice job (Yes, the two extra SSIDs were a little annoying when connecting devices, but I was OK with that). Setup was pretty easy, though I did want to get into the configuration to set fixed IP addresses for wired and non-wired devices in my home. All that worked perfectly fine. The only irritation I had was LinkSys uses the Gateway of 192.168.1.1 and TpLink chose 192.168.0.1. So all my fixed IP address devices had to be reconfigured (I have a WD Cloud and Canon and Samsung printers)... all of which were time-consuming to figure out how to get them reconnected to the BE9300. Then came the big surprise! I went into the setup on the TPLink "extender" and the BE9300 recognized it and "hijacked" it! The extender is no longer an extender (though it can be configured as one), but it turned out to be a mesh access point. All of a sudden, the 2.4gz and 5.0gz networks on the extender (TPLink RE550) were greyed-out! The BE9300 turned it into a mesh access point! Being a little skeptical, I cranked up m favorite WiFi phone app (WiFi Overview) and walked thru the house (3600sf). This app displays a graphical indication of signal strength in a parabola display of all SSIDs nearby. Since the extender was now a mesh access point, I only had TWO SSIDS (one for 2.4 and one for 5.0) and of course, two "sub" SSIDs. As I walked further away from the BE9300, I could see the signal strength of the mesh unit growing larger and larger. Like any mesh network, it apparently switched to the mesh access point seamlessly on my phone... as advertised without any degradation of visual download speed.. Additionally, a lot of reviews on this product indicated they were seeing increases in download speed, so I did quite a few speed tests with several different test sites. Since my Spectrum 1gz service is still copper, I knew I'd never see 1gz speed, but the top speed with the LinkSys on and off the wire was about 910gz-920gz... not quite a 10% "loss", but still respectable. With the BE9300, I am consistently seeing over 950gz, so yes, I'll agree there is a slight increase in download speed. Another plus here is the BE9300 is Wifi 7 enabled. Yes, currently, the only WiFi device is the iPhone 17 pro, but again, its nice to be ahead of the technology curve rather than be current or behind it. In summary, I have to admit, the BE9300 exceeded my expectations, as I was not really in the market for a mesh system, but almost, by accident, I have one (I glossed over the "Easy Mesh" part of the BE9300). Combined with the slight increase in speed and the WiFi 7 capability already being there, I highly recommend this guy if you want to stay in the $200 range (vs. $400 range) when looking at a new or replacement router. And I got this during Amazon's fall "sale" and it happened to have a $20 coupon from TpLink which made it a very nice deal.

Falta atualizar os firmware? Deveria ter um "Manual Detalhado" para explicando as configurações? Configuro a wi-fi no modo SSD oculto, mas dá erro de senha(30 caractere alfanumérico)? Como sofresse uma interferência.

Very Good Router. I recommend that this Router has the best output port.

dont waste money