Smooth-On ECOFLEX 00-35 Fast Platinum Cured Silicone Rubber Compound Kit, 2 Pound

This is great stuff, but you -really- need to know that its FAST FAST FAST setting! Get everything ready to go, mix, and pour that sucker! Don't dawdle or it will turn to rubber in the cup! The end result is super soft and makes great suction cups for complex surfaces. Definitely buy some silicone mold release: Ease Release 200 is what I used and it worked perfectly! Note: you need a mold release that is specifically for releasing silicone rubber from a mold. The usual stuff is mostly for keeping things from sticking TO a rubber mold.

'

This stuff sets FAST, and that's a great thing for some body molds. You have time to stir for like 1 minute before putting it on and it's fully cured to the touch in under 5 minutes. No waiting around with sticky half-cured silicone on your skin. I would definitely not use this for anything deep with fine detail though, because it's pretty viscous and sets so fast there's little hope of popping air pockets unless you're extremely skilled. I'll be using this for every single body application I ever have though. It's just such a huge quality of life improvement.

Excellent, that's what I need it. 🙏

In short: Great for quick turnaround, takes pigments incredibly well, good strength, overall fantastic silicone depending on your needs or project. A little nighttime reading breakdown: Bought this specifically for its short pot life and for casting silicone in silicone. Anyone new to making a silicone casting (not a mold) ensure you use a mold release or a thin coat of Vaseline! Otherwise the silicone will bond to your mold and that’s a wrap. For aerosol release I prefer either Stoner Brand (if painting your castings Stoner has a great product that does not leave that annoying residue that paint hardly adheres to… or Mann Ease Release 200 Pot life: I believe it’s 2-2.5 minutes depending on your current climate. I’m able to squeeze an extra minute or two out of this by putting both A and B side in an ice bath for for 20-30 minutes. When you’re using a pressure pot this is incredibly helpful as that 15-20 seconds it takes to tighten down the lid and hit it with pressure is everything. Pigmenting: It takes pigments incredibly well: Mica and SilkPig from Smooth-On are the two I used. Zero issues with curing or cure inhibition.