(Pack of 6) Single AA Battery Holder, 1 X 1.5V AA Battery Holder, AA Battery Holder with Leads Wires

Battery holders come in all kinds of Quality, from very poor to extremely nice. I would place these six in the upper 80%. Leads are long, metal appears to be strong. AA batteries are held firmly in the holder. There is nothing to not like. The price was great, and shipping was fast. If you need a AA battery holder, this is the one.

Worked well for my needs. I used one for a micro switch I wired for starting a wood race car for scouts. Good for anyone that needs a small battery unit.

My recent project required four AA single battery holders. My search found these.The pros:+ Low price of $5.95 for a 6 pack with free Amazon shipping!+ Pretty well constructed, holds the batteries tightly in place.+ I have a couple spare AA battery holders, as my project only required 4!+ Advertised - Type of AA Battery Holder: 1x 1.5V AA battery holder with wires.+ Advertised - Leads have tinned wire end, wire Length: 5.9"/15cm, wire color: red and black.+ Advertised - Dimensions: (L*W*H)/2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm.The cons:- No mounting screws are provided. For my project, I had to source #2 flathead screws to mount these.Closing remarks:▪ The 4 AA battery holders are working well, as expected in my project.▪ The batteries install easily, but removing the battery requires something like a hooked wire spudger to pull up the positive end of the battery.▪ In addition, once a battery is installed in the holder, the spring on the negative end may need to be pushed down to center it on the battery.

Units arrived on time.Great for small projects

perfect for powering projects = the battery is a tight fit but they work satisfactorily.

Good price

So far the pack seems to be very durable and functioning well. However my only issue is that it seems to hold the batteries on too tight. Trying to remove the battery actually damaged the wrapping on the battery itself without using a tool or piece of ribbon underneath the battery itself.

Almost all the battery pack options I checked online are in series connection. I found this option,These are great individual battery holders for creating parallel battery packs. I just used a small piece of 3/16 plywood and hot glued the battery holders next to each other. Soldered the positive and negative wires in parallel and I'm good to go. You can also use a piece of thick cardboard instead of the plywood.