Cowles Custom - Premium Universal Body Molding for All Vehicle - Easy Install, Chrome Finish, 1/8" by 20 feet, UV Protected, Long Lasting Flexible PVC

I recently purchased the Cowles Custom - Black Finish, 1 in by 12 ft trim to upgrade my Dodge Viper’s upper door trim, and I couldn’t be happier with the results. Product Quality: The Cowles Custom trim is made with durable, flexible material that feels premium in hand. The black finish has a deep, glossy look, which perfectly complements the Viper’s sleek design. I was impressed with how resistant it is to scratches and weather exposure. Installation Experience: Cutting and shaping the 1-inch trim to fit the upper door area was straightforward. The adhesive backing is strong and positioned well, making application smooth without any messy residue. I cleaned the surface, lined up the trim carefully, and applied even pressure—everything bonded securely on the first try. Appearance and Function: Once installed, the trim gave my Dodge Viper a sharper, custom look. The clean black line along the door edge enhances the car’s aggressive styling, and it looks like it came straight from the factory. Additionally, the trim provides a subtle protective layer against small chips or scratches. Overall Review: I highly recommend the Cowles Custom 1 in x 12 ft black trim for anyone looking to add a professional, custom finish to their vehicle. It’s easy to work with, holds up well, and dramatically improves the appearance of the car’s exterior. Rating: ⭐⭐⭐⭐⭐ (5/5) Perfect for car enthusiasts looking to customize their ride without sacrificing quality or durability.

I bought a used Ford F150 truck with chrome bumpers. Problem: the rubber trim on the front bumper was missing, leaving a series of ugly holes. I ordered this trim, as it is 3/4" wide and would cover the holes. I scrubbed the bumper with soap and water then took paint thinner to it to make sure there was no old wax etc. to stop the stick. With the backing tape still on, I measured what I needed of the (plastic) chrome tape, cut it off at each end on an angle to match the bumper, and peeled it a foot or so at a time as I stuck it down. I needed a small realignment in the middle, and was able to pull it back and redo. It went down nicely, and then I went back and carefully pressed it in place, using fingers, then pressing with the slippery backing paper to make sure and not scratch the plastic "chrome". I did this several times over the first few hours, and again after it had been on overnight. Bottom line - looks great. It appears to be part of the original chrome bumper and it remains thoroughly stuck down. I've had it on for a few months now, and have had it through the car wash a few times. No issues. We'll see how it looks after a couple of years (how does "plastic chrome" handle the sun?), but so far so good. One note: it's $20 for 12 feet, so be sure to measure what you need before you order. The price can add up pretty quickly. That said, it would make good anti-parking-lot-ding protection. UPDATE more than a year later. My truck is parked outside and gets the full blast of the Arizona sun every day. The trim is still looks excellent. Recommended!

I have been using Cowles Custom Chrome Trim for years. The quality of the Chrome and Adhesive is great. The trim is flexible up to a curtain point or you will crack the Chrome finish. Installation was easy. Measure three time, and apply once. Great DIY for cars and motorcycles. I just customized my Black Matte finish 2016 Honda NM4 in Chrome.

I bought this body side molding for two purposes: (1) Give my car a sportier look, and (2) protect my doors from minor door dings. It seems to be doing both. Installation was easy and after a month or so the adhesive is holding up well. I gave it a four-star rating because it is a bit pricy and we have not experienced extreme cold or hot weather yet. If it holds up well after a year or two, it certainly deserves a five-star rating.

This product worked out very well! I bought a new King Ranch Ford Truck but it didn't have the chrome trim on the step rail. So I bought the 1" strip for each side and 8 months later its still on there looking great .

the 3/4 Inch by 12 feet trim is a direct match to the wide trim on any Indian motorcycle front fender any year 2014-2023+ one roll is enough to do both sides of the front fender (see picture) the 1/4inch by 20 feet is enough line the upper and lower edges of the saddle bags and do the lower edge of each side of front fender (see picture) . the 1/4" molding is not something Indian does OEM but I think the look is so professional that they should have done it (see picture) Both fender and saddle bags have "sexy" curves that the trim must conform into. the easiest way is pull 3 inches the backing from the adhesive and flip the ribbon180 turn so that one can "pull" it at a right angle to the trim. Its best to over hang an the 1st edge by an inch so you can later flush cut it with a razor blade as to get that factory flush with edge look. Align the your trim as to get 4" into curve conformation, use a hair dryer heat those 4" to hot tub warm if needed - not too much heat if you keep it so your fingers can easily hold the part as well as fingers in the heat stream of the hair dryer - that is perfect. one you are happy those 4" are perfect have someone pull the tag end. you get exactly one chance to get alignment perfect and ony one chance adhere the trim. I find it easiest if two people are involved, one person applies heat when asked that same person pulls the tag end when asked. Meanwhile the other person is responsible for get those 4" aligned perfect, calling for heat if needed as to get those 4" perfect and then calling for the tag end to be pulled once perfect.

removed 20yo chrome molding on side of Ford Expedition. Installed easily, looks great

Did NOT stick on SUV for over 4 weeks. Needs better 2 sided tape.

Excellent quality for the price. Used this chrome trim to replace some damaged trim on an older SUV.

This product is a little less quality than what Ford uses for chrome , however next to the chrome it looks pretty pretty close 🧐

Quality adhesive. Still holding.

super sticky glue, good stuff.

Looks like a Quality product went on easily and looks very good