- PPR3-N02BG Compressed Air Pressure Regulator 1/4" NPT (High Flow), Embedded Gauge & Bracket

Awesome regulator that works perfectly. I had a specific application where I needed to step down 90psi to 3psi for my air lockers in my jeep. After a lot of testing I found that this regulator does exactly that with no leaks and consistent flow. It’s a great value for the money and one of the only ones this size that I found capable of handling that big of a pressure difference.

I needed an air pressure regulator that would could output 3-5 psi consistently in order to operate a laser cutter that requires extremely low air pressure at times. Initially I had a hard time finding a suitable regulator, but then came across this one. It has worked perfectly. The installation took a few extra minutes, because you have to attach the bracket to the wall, then attach the regulator to the bracket, but the process wasn't too bad. I have a larger regulator / air cleaner upstream that reduces 100 psi to about 30 psi, then it branches into this regulator to output 3-5 psi. Overall working great and I feel confident that my laser cutter is getting the appropriate air pressure.

Bought this to improve air control on my airbrushes. Sometimes I need to use very low air pressures. The regulator on my compressor was impossible to adjust below 10psi with any repeatability. I bought the 3 to 30psi version and put it downstream from the air compressor regulator. I located it so it is at hand while I'm painting. It works beautifully at ultra-low pressures with my .2mm detail airbrush. If you are getting one to use for this purpose be advised that you may have a problem finding the correct adapter. I needed to adapt the 1/4" female NPT on the regulator to the 1/8" BSP thread used by Iwata and many other airbrushes. So, I needed a 1/4" NPT male x 1/8" BSP male adapter. After searching the internet for 2 hr. I decided no one makes such an adapter. I ordered some 1/4" BSP male x 1/8" BSP male adapters. The 1/4" BSP threads are close enough you can get about 3 threads engagement into the regulator and maybe get it to seal with a lot of teflon tape. I decided to chase the threads on the adapter with a 1/4" NPT die. I was able to get full thread engagement but it still took several wraps of teflon tape to get a good seal. Installing this in my system was a PITA but well worth the effort.

Update: I got in touch with Pneumatic Plus support which diagnosed the problem with me and sent a replacement. The replacement is working fine so far, so I’m revising my rating. I’m happy with the product and support. ========== Original review: Given the premium price, I bought this thinking it would be a higher-quality part. Two months on and it slowly drains the compressor tank if left on anything other than the highest pressure setting (i.e., the same pressure as in the tank). This was sold by "Amazon.com Services LLC" and the return window closed after 30 days. There's no way to contact Amazon about this, and no information whatsoever on contacting the manufacturer. Really unhappy about being out the money and having to repair this once again.

a good accurate meter but i wish the bracket positioning was better.

Nice and compact for my air throttle setup on my motorhome.

Great for low pressure adjustments. Works great

Used for airbrushing since gauges on most compressors aren’t built for fine adjustment. How fine? One pound increments are possible using this item with its 0-60 psi gauge. Learned (the hard way) that other items listed as regulator valves with pressure gauges don’t actually regulated the pressure the way a diaphragm valve will. Long term reliability is still unknown but it is compact and feels solidly built. I used teflon tape on connections with no leaks so far.

Easy to install quick delivery great price.

I’m not sure if I should return this, I just need the gauge

holds really tight regulation

Muy bien

I think its lowest operating pressure is around 7psi so pretty standard compared to other regulators.