Car Window Shade Static Cling-on Sunshade to Block Sun Glare, Harmful Heat, UV Rays, Sun Glare Reducer Cling Window Shade Protect Driver Baby Child Or Pet's Eyes- Black Static Cling Film Design 1PC

It came rolled up in a little box, so I unrolled it and weighed the ends down on my outdoor glass table in the sun for a few hours before I tried to apply it. That worked to straighten it out. It didn’t come with any instructions but this is a removable vinyl cling-film, and I’ve applied similar to several windows in my home before. I removed the backing and sprayed some (dish soap) soapy water on the back and shook off the excess, then centered it on my window behind the rearview mirror and used a credit card to smooth out the bubbles from the center to the edges. Bring a paper towel to wipe up drips. It’s been a few days now and it’s stayed up without any problems. I do wish it was just a tinted piece of vinyl, rather than spotted, but it still does cut down the sun significantly.

Work very well and have stayed in place.

This does not stick to the car window and barely blocks the sun. Awful quality, not worth the money. Emailed seller about poor quality of the product, never heard back.

I bought this for my passenger and driver window it is somewhat forgiving.Use a squeegee trust me a debit card will mess this up

This is a 'good enough' solution to adding a sun shade strip to the top of my vehicle windshield. Although, it would be better to add a full tint strip to the windshield. Still, this is a cheap alternative. It can be custom cut if needed. But, it will not stick to stippling / dots above my mirror. So I had to custom cut a portion around that area. There are many useful instructional videos on how to apply a decal using the wet application method. It helps to have a squeegee that has felt covering on the edge so when you're sliding it on the cling, it slides easily. It is best to use a soapy water to remove oils and dust first. Then use alcohol to really clean off remaining oils & dust. Then use plain water sprayed on both the inner glass as well as back of the cling that faces the glass. This will insure good adhesion of the cling to the glass and prevent bubbling. If you don't follow this method, there will be bubbles and it will look awful.

Although this product did not come with instruction, it works just like a window cling. The one side needs to be wet and then you place it in the spot you want it and wipe out the water underneath the film. I also needed to trim the center a little bit because it did not fit over my rearview mirror attachment. It was easy to trim.It has been nice to have some shade from the sun where my sun-visors do not cover.

Be sure to review State standards for its use.

Seems of good quality, but simply didn't stick. Tried it on my car, which has 10% ceramic front window tint; did not stick at all! Tried it then on my girl's car with no tint, and it seemed to still have trouble. We'll see how long it lasts on her car.FYI, I have a static cling parking sticker for my employer that works flawlessly with the tint. No excuses for this thing.

Does it’s job and easy to install. I purchased a couple sheets for a spare.

The description carefully neglects to say how big (or not) the product actually is. The actual size (11.5 x 15.5 inches) is much smaller than shown in the pictures. The idea of cutting it down to the size/shape of your window is a non-starter. Misleading and disappointing.

Works okay but the black mesh design is just printed on so I don’t know how long it will last.

I found this too big for my Mazda Protege and difficult to cut down to the correct size (keeping it even and straight). Once installed, it looked bad from the outside so I removed it. Can't recommend it.