Aftermarket 4pk Deck Wheels for Xmark 103-3168 103-4051 1-603299 Made in the USA

If you have a Toro time cutter 50 in zero turn, this kit will fit perfectly and be far stronger than the factory original bolts. See the photos. After 1 year, the Toro supplied shoulder bolts loosened and one of them snapped off. It's a very weak design that puts stress on the threads when the wheel hits any bumps. These will not be covered by warranty as the dealer will just say it fails because of customer abuse . The dealer gets $12 for one replacement shoulder bolt and flanged lock nut. Yes it will work but it's pricey and will certainly break again. This Exmark kit 103-3168 wheel and bolt assembly are a perfect replacement for the factory Toro wheel and bolt. The multi-piece design is far stronger and utilizes a long 3/8 through bolt and a separate axle bushing with a large flange. The large flange mates up against the wheel mounting bracket and takes most of the bending moment from the wheel when it hits things and does not try to bend and break the threads. The Exmark assembly also utilizes both a locking nut and a domed spring washer to help prevent loosening. Be careful, as the parts must be properly assembled for maximum strength. See the photos. I think this is where some people go wrong because the product advertisement photos *do not show the correct parts orientation*. Please see my pictures for the strongest assembly. The axle bushing gets inserted on the extended hub side of the wheel, then the bolt with large washer gets inserted into the recessed hub side of the wheel, and then the threads of the bolt are passed through the wheel mounting bracket on the deck, and finally the lock nut with domed spring washer go on last before tightening. You want to torque the nut enough to flatten the spring washer against the wheel mounting bracket face. A little research revealed a far stronger design and cheaper kit

Purchased these to replace the old stock rollers on my Exmark Lazer.Were easy to install, Work great and were priced right.

Quality is good, I could not tell the difference between these and the Exmark OEM wheels, only difference was these were riced way less.

Some reviewers have commented that this product does not fit Kubota mower decks. The wheel diameter & size are the same as Kubota OEM, the problem is the length of the bolts. The Kubota decks have a thicker post than most mower decks and require a bolt that’s ½” longer than the bolts that come with this product. I bought 3/8” zinc bolts, 4 ½” long plus 3/8”X16 locking stop nuts at a big, blue box store for $0.87 + $0.19 ($1.06 total each = $4.24 for a set of four.) The bolts that come with this product are 10mm as are the OEM Kubota bolts. A 3/8” bolt is very slightly narrower than 10mm and will fit the shaft. The 2023 price for an OEM Kubota "gauge wheel" is $14.30., the “shoulder bolt” is $4.70, a washer is $0.49 and a nut is $0.70. Total cost = $20.28 EACH. (Four OEM wheels and hardware would cost $81.12.) Compare that to the cost of this product and add the $4.24 for the 3/8” bolts and nuts. Much LESS THAN half the cost of OEM!

Deck wheels worked perfect on my Exmark Quest 52" deck. I think they're better than the originals. Stronger mount & use a standard straight bolt unlike the originals. My deck uses 3 so I've a spare but I don't expect to need it, these seem to be pretty strong.

These are made well and very affordable. They were very use to change and fit the mower perfect. If you’re looking to update yours I would suggest this company.

Product is essential to providing a quality mowing job to my customers. Thus far it is working well but was very slow in getting to us.

I’ve bought several of these through the years. My commercial zero turn uses several of these “anti scuff” wheels to support the deck. The axles and the wheels are good quality but they take a beating and will need to be replaced eventually. Having spares on hand is always a good idea!