Window Molding Trim for 2013-2018 Honda Accord,4-Door Sedan,Chrome Outer Door Weatherstrip Window Seal Belt,Replace#72410-T2A-A01 72450-T2A-A01 72910-T2A-A01 72950-T2A-A01

The OTTANMC window molding trim fits my Honda Accord perfectly and instantly improved the car’s appearance. Installation was simple and quick, but few small flat scredrivers might be needed. The trim feels sturdy and well-made, not cheap or flimsy. It sits flush and secure, even after driving and washing the car. Finally, it’s a high-quality replacement that gives a clean, factory-style finish at a great price.

I’ve owned enough Hondas to know this isn’t a fluke; the factory weather stripping on the Civic seems to age like a banana in July. Give it a few years and it’s cracking, peeling, and quietly inviting rainwater to move into your doors like an uninvited houseguest. The fit was spot-on, like they came straight from the factory on a good day. All four went in within minutes, no wrestling, no colorful language, no “maybe if I force it” moments. Just clean, simple installation. Best of all, the problem is actually solved. No more water sneaking past tired seals. No more opening the door after a storm and wondering if you’ve accidentally started a small aquarium.

Pleased with product. Good price especially when compared to Honda OEM replacement parts. Fit is very good, close to original, though Honda parts might have a _slightly_better fit. Well packaged and relatively easy to install. Rear window molding take a bit more time to get right. Take your time. Recommend you review various YouTube videos. Also, be sure to have or purchase some cheap plastic pry tools. Overall, pleased with results. Would purchase again.

I watched a YouTube video to learn to remove the old trim and install the new trim. It seemed simple enough, but it was a little more complicated than the instructions in the YouTube video. Looking back, it is harder to remove the old trim than it is to install the new trim. Don't forget to wash your windows and door beneath the old trim before installing the new trim. The trim pieces do not include any instructions for installation. The pieces are individually wrapped and labeled. If you don't have one, you will need to have a plastic pry bar to aid in removal of the old trim. In the video I watched, the installer used a plastic pry bar and a screwdriver to remove old trim and broken clips. I ordered a plastic pry bar kit that included one metal pry tool and I used that along with the plastic pry bar to lift the old trim up and break the first clip. After that you can use your hands to pull the trim the rest of the way off. You will break the old trim clips removing the trim. The old trim is garbage after that. I read reviews prior to ordering and was very hopeful based on positive reviews, but also completely expected the trim to not work on my car. I installed my left rear trim piece first and was sure the one review that mentioned the clips didn't work was going to be my experience because the piece was not clicking anywhere. So after 30 minutes of struggle, I did not think the trim was going to work since the clips did not click into place as instructed in the YouTube video and the trim could be easily lifted back off the door. I asked someone else to take a look and they suggested pushing the center of the clip forward just a bit to give it room to grab under the door. Following that advice, I used a screwdriver to push or bend the center part of the clip forward. This is the part of the clip that will catch under the door frame and keep the trim in place, and after that bend, the trim did click in place and could not be moved. The YouTube also mentions that once it clicks in place it is permanent, so make sure it is aligned correctly before you clip it in place. I clicked my right rear in place about 1/4 inch too far back and it took a lot of pushing, pulling, and shoving and a lot more swear words to finally get it to slide into place and close that gap at the front of the door. Lesson was learned and I made sure to double check the fit before clicking the other pieces in place. If I'd known to bend the center of the clip out to help it catch under the door, removal and installation would have probably taken an hour. I wasted about 30 minutes trying to make the first piece work before I gave up and asked for help and then it took me about an hour to finish up, including time to clean the windows and door beneath the old trim. All of the pieces fit perfectly and they look like factory parts on the car.

Installed on 2016 Honda Civic 4-door. Functional fit, great price. Removal of the old molding seems a little daunting, but once you accept that the old plastic tabs will frequently snap off, it goes quickly. I ordered a cheap set of auto trim removal tools and they were very helpful. I recommend that you watch several YouTubes before you start... none of the videos were fully helpful, but as a group they were enough to go ahead with some confidence. The tabs line up perfectly with the car door panel with a minimum of work. The alignment of the front and back molding and the rest of the trim is a little off but overall, the trim looks good and functions well. I don't know if OEM parts would align better, but these are certainly great for the money.

I bought it to replace my old ones on my civic 2013 , fits perfectly and easy to install. No a professional required,DYS. Highly recommended, get some plastic tools to take out the rear ones , get it done in about 20 mins .

Perfect fit for my honda. Easy installation. Excellent price

Parts were just as described an matched the photo. Package arrived on time

The product arrived, and we installed the four rubber mouldings on the windows. Not original Honda window mouldings but the quality is just as good and the price is considerably lower. They were a perfect fit, and we are happy.

Honda 2016 touring fait parfaitement

Live in Australia.These do not fir our 2012 honda crv..waste of money.

Buen producto, cumple con las expectativas

Excellent fit.