Fluid Film Black Non-Aerosol, Long Lasting Corrosion, Penetrant & Lubricant, Anti-Rust Coating, Protects All Metals in Marine and Undercoating in Automotive & Snow-Handling Vehicles, 1 Gallon

I use this on all of my vehicles now. One can will coat 1 1/2 half ton trucks. Or one full truck SUPeR thick! Recently coated my ford ranger. Sprays on well with spray gun found here on Amazon. Purchased the black color to make underside look better. Lasted all winter and still looked great. BAD: makes an oily mess for the mechanic. Recommend having work done before coating. But in the long run, my mechanic appreciates it on a 15 year old vehicle when everything unbolts or comes loose without breaking.

I purchased my first can of Fluid Film back in 2021 after purchasing a new F-150. In short, this stuff works, and works incredibly well. Sprayed using a 8 gallon harbor freight air compressor and the Kellsport Woolwax pro undercoating gun. I tend to use 1/2-3/4 of a gallon each spray. My first two applications I have done were with the original/yellow/clear Fluid film. A major benefit of that is it doesn't alter the appearance of parts very much and you can visibly see what areas may be starting to rust easier. The disadvantage is that it doesn't flow as well and is thicker out of the container, but that potentially aids in keeping it on. I spray my truck twice a year which is probably overkill (pre summer/beach driving, and pre winter/salt roads). Had I done my truck earlier the first time there wouldn't be a speck of rust to be found. Since my initial treatment, I have no seen any new areas of rust formation. I even power-wash the underside of the truck prior to treatment and still cant get the original coating off. It adheres very well. I'd say the only major downside is that dust and dirt stick to the coating and can make the underside look a little dirty, and if you go to work on your vehicle it may be a little messier than if it wasn't coated. Important information: -A respirator is absolutely necessary when spraying this stuff, goggles too. I wear a full ace 3M respirator when doing this and the overspray gets everywhere. I know it's fairly natural stuff, but it cant be good to get it in your eyes or inhale it. You can see the atomized product in my video, it gets everywhere. -Clean the underside/frame very well and make sure it is completely dry before application. -Either cover, or be prepared to clean anything you don't want what is essentially oil on. If this gets on your brakes your stopping power will be reduced. -Proper application on a Ford F-150 (Inside and out of frame, and any exposed steel) took me about 3/4 hours without prep/cleanup. -Cleanup: the overspray gets everywhere. Be prepared to cover everything or clean it up. That includes the ground under the vehicle, the outside/paint of the car, and if you do it in a shop... everything in there as well. Highly recommend outdoors on a day with low to no wind. I find it has been well worth the investment and after 2.5 years of ownership, multiple summers of beach driving, and salt sprayed roads, my frame and axle look brand new.

Used this for undercoating my old truck and it works well. I used an air sprayer to apply it and it covered all the surfaces and cracks good. Great for protecting the frame in salty areas. Solid product if you want to keep your vehicle rust free.

Works great!

Used the wool wax gun and a 4.5 CFM 27 gallon compressor. Zero issues. I like the black because it’s easy to see where I sprayed and where I missed but the truck is white and it is also easy to see where I shouldn’t have sprayed it. The clear one isn’t really clear. Kinda tan so either way you’re going to see it. I honestly prefer CorrosionX because not only does it stop / prevent rust, it is a penetrating product and will seep and creep in between the panels better than this. This is like warm peanut butter. Also, I sprayed a can of this on the bolts holding my front bumper on and since I’m in the process of painting the bumper cover, these bolts have been exposed to the elements while I drive. It’s been raining a bit this week and I noticed the black fluid film I sprayed on those bolts is completely gone and some rust was forming. Keep in mind this product is really ideally suited for the frame and inside the rails, rockers, jams, etc where it’s not easily going to get blown off.