Dremel Blueprint Portable Saw Station with 12V Brushless Compact Circular Saw and Multi-Purpose Cutting Case (CS12V-S1C)

I just received this a few days ago and my space is small and compact but I wanted to expand out my tool collection to do more with my projects but remain within the space I am aloud to work, This little kit is perfect if you are working on in home projects and DIY projects and needed an alternative to larger tools. Yes it can't replace a full sized miter saw or table saw but that is not what this item was designed for! It was designed for people who love the hobby but have limited space! Easy to use, great value for the money, cuts are clean and it does what is needed! I can't Quote the battery life because I have not used it all day and ran it to the ground but for what I have used it for, its perfect! Edit: **highly important** I did forget to add something and its quite important, the first day I took this out of the box I had no idea they preloaded the battery into the saw, I am often quite careful with everything I do but as I was looking over everything by the bad luck of everything I hit the press and trigger the way I was handling it and the saw jumped to life! The battery was preloaded?! I really didn't expect that, Did I get a returned item or is this how they packaged it? There was tons of room to put the battery someplace in the kit, but nope it was in the saw! If I was absent minded or not paying fully attention I could have sliced my hand or leg pretty bad. Again I DID NOT do this and I am fine but anyone reading this just be careful when you get yours!

I love this saw. It’s portable, lightweight and great for my DIY projects. I like the case where everything I need is all in one place. It makes great straight and angle cuts. It stays charged long and doesn’t take much time to charge up again. The laser is great and the option to change the angle cutting position is nice. I would definitely recommend it!

Just made my purchase for a new miter saw system by Dremel. set it up and squared up the saw stop with my carpenter square and tighten down the blue screw. My my first cut and was skeptical. but the cut is smooth on a quarter in cedar hobby board. There was some fir left, but not severely so - I'm satisfied with that. took my square and it cut perfect. I know it looks a little off but the dark you see is on the square and not a gap so I am satisfied with that. the battery on this saw is the same as the Bosch battery and both are interchangeable with chargers and the batteries. As I have a Bosch battery drill and a Dremel battery rotary and now this station, I have enough power to last me all day if need be. This is a "plastic" but I still think it can be set up on a commecial job site for sawing trim or quarter round where you can drag it around with you. ordered the woo cutting blade as well - the drawback here is a 2x4 requires multi cuts. Some call it a hobbyist tool and it is definitely that. I think it is a little more than that - just my opinion. Bosh is expanding their line of tools for the Dremel customer as Dremel is part of Bosch. I am down grading my shop - this is my new saw to make smaller crafts and boxes.\ I'm thinking they will expand the Dremel lineup even more. Hope this helps and will try to answer questions that I can. Mark Ok I’ve had difficulty in sawing 2x4 but found out, being a leftie for some reason i It stoppped. Then decided to saw right handed the saw works fine. This is my go to saw now. Love the footprint of this kit.

This is a great little saw. It's lightweight and easy to handle, making it perfect for quick jobs or extended use without fatigue. Despite its size, it's powerful enough to cut through most types of wood with ease. The built-in guide helps achieve straight, clean cuts — a big plus for precision work. The battery charges quickly and holds its charge for a long time, so you're not constantly tethered to an outlet or waiting around. Overall, it's a reliable and efficient tool that punches well above its weight

Awesome kit to help with smaller projects! Cuts 1” thick using the table. But if you have a 2x4, there is an attachment to help cut both sides at 1”each. Im excited for all the projects that I’ll be able to get done with this! No need for heavy duty if you’re just taking on little cuts at a time. The cutter itself is amazing. The laser is great and holds a good charge on the battery! Easy to use and great price for getting things done. I was able to cut a 2x4 to put up against my deck end and put a camera bird feeder on it.

My ONLY complaint is that the 2x4 jig has to be screwed down, which quickly became difficult for me to do. Might see if I can find a different jig that is secured without screwing down. I have hand/wrist issues; rotating the wrist like that is not easy for me to do for more than 1 or 2 cuts. Didn't know it was gonna be an issue or I would have planned for it better This is Lightest saw I've used, making it less physically exhausting. Size is great for smaller projects like trim and cutting 2x4s without needing extra equipment or tools, for most people. I call it a baby table saw even though it isn't technically one? I do wish the blade was big enough to cut through a 2x4 in one pass, but the jig did the job, and my cuts were good enough for an newbie and my project, and I was able to sand things down later. Didn't have to try and buy/rent a table saw, which is scarier looking to me than this little baby.

I finally bought the Dremel blueprint & an extra blade & battery. Lol, waiting for the deep freeze to end to use it on my Tiny Home in storage (battery operated is a plus). The Dremel blueprint is the answer to my prayers; no longer do you have to buy oversized expensive equipment to do finishing work around the house. This portable saw station has a small footprint with everything you need, self contained & easy to use in it's own case with a handle. I'll be able to use my old bed slats for my bay window seat and cut wood to put on the wall next to my bed; I can now custom cut legs for my floating end of kitchen counter, also make custom shudders for the windows. Everyone has projects that they want to complete, but can't afford the equipment or be able to store it; too expensive to hire someone to do it for Ya. The price points on this set up is wonderful, and that's why no one should be without the ability to create, and or fix what is needed done without breaking the bank. 100% Recommend!

This little saw and table set up is great for quick - super small projects. It's portability is 5 star. Well made as is expected by Dremel. Battery seems to last through several projects. Haven't had to recharge yet.

Very well designed aned executed product working flawlessly within the intended use. Buy it if you need occasional home floor repairs, build simple boxes, cabinets or bookshelves. It cuts up to 1" material in one go. With the case, it creates a mobile miter and cross cut station. It has an attachment for rip cuts. It has a laser for precise material positioning. This single package replaces 3-4 properly sized tools, but does not require a workshop. What's best for me, it is very easy and safe to handle. To the point I'm not afraid to give it to my 10 y/o to help with home projects. Yes, it does not cut 2x4 in one go, but properly sized circular saws are dirt cheap. Just buy a tool for what your are using it for.

جودة ممتازة وانا راضي تماما عن الطلب منصة عمل متقنة ومفيدة وانصح بالاقتناء

Es un excelente producto. Esta muy bien pensado. Es para trabajo liviano pero lo hace excelente. Hay que dedicarle tiempo a conocerlo, pero responde con calidad

I've had this for a day and have used with the saw station to cut some trim. I've also used it to saw a piece of melamine in half lengthwise. For someone who had no experience with power tools ( I only own a drill), this is an amazing little tool. I watched a few videos on how to use it safely just to be sure and using the saw station was a breeze. I taped my cut line and the cut was quite smooth, same for the melamine. It is not too powerful, which is a good thing, because as a newbie it makes it very easy to control. The instruction manual is pretty thorough in explaining how to use it safely and the saw station pretty much ensures your safety. It also folds up into a small case, so is easy to store in my small condo. After reading the manual, watching a few videos and doing a few test cuts with the saw station, I felt comfortable enough to cut a piece without the station and I am very happy with the result. My only complaint is that the dust collection is abysmal. For an occasional DIYer, this is the perfect tool for me. Thanks Dremel for thinking up this great all in one tool centre.

Es muy practico y hace cortes repetitivos como una sierra de mesa pero sin el peligro ni el ruido. Corta hasta 1 pulgada y al ser una marca de Bosch es compatible con las baterías de 12V de Bosch. Indispensable para bricolaje, fabricación de cuadros y gabinetes de cocina.