WALKINGDESK 63X55 Inches Reversible L Shaped Standing Desk Height Adjustable with Cup Holder, Electric Corner Computer Desk, Sit Stand up Home Office Desk, Ergonomic Gaming Desk, Rustic Brown

Alright, so I got the desk without all of the extras so just the base $300 one, it's L-Shaped and yes it goes up and down, the desk itself is definitely my favorite desk I have ever owned, giving me plenty of room and space for probably up to 3-4 monitors, I have two monitors one 32" and one 42" one and still plenty of space for another or something else even with my computer up on the desk. --- The Cable management system is in a prime position, I'd recommend a surge protector with an extra long cable to rest in the spot where the cord management box sits. Just because raising it to the top can be a little tight. I'm 5'9 so I never have to go all the way up, but definitely worth while. The Desk overall looks nice enough with it's fancy carbon fiber display, but the wood is not high quality but it is good enough quality that you won't really care especially for an only $300 price tag, I saw some stuff at Costco that wasn't as nice for $500-600. Pros: This is the best cup-holder on a desk I've ever seen. I never thought I'd be happy about a cup-holder but honestly, I may never buy another desk again just because of how great the placement and design of this cup-holder is, absolutely phenomenal, if they ever stop making this desk, I may just rebuild this one time and time again just for this sweet sweet cup-holder... Desk is cool too, no issues yet, I know some people have said they have issues after a month or two with it lifting, I'll check back if I have issues and follow-up with support and get back to y'all if I have issues. The Headphone holder is neat too, I have my Meta Quest 3 with both controllers on one hook, and my Arctis Pro Wireless series on the other hook and looks clean and holds them well, even with going up and down. Cons: The Directions could be better, luckily I've built a lot of furniture so didn't experience many issues but had to re-look at a few parts a few times to make sure everything was lined up correctly, not to mention had a heck of a time trying to get one of the lifting cylinders installed it was just a little bit too big, but I was finally able to get it in there and everything worked out, I'd highly recommend two people(just for the beginning steps due to balance, I did it by myself but the second person would probably have saved me a few curses), a really good philips screw driver you'll use it a lot, and the screws are probably going to get damaged if you use power tools, so definitely a hand screw driver. Probably a hammer if you need to knock down the cylinder a little bit to get it into place, I did a small tap and it was enough to get it so I could get it into position. Tl;dr: The Desk is great, I love it, cup-holder is one of a kind 5 stars for that alone, make sure you are using the right screws when building it, recommend hand tools only, 2 people would be ideal but I did it by myself in like an hour by balancing certain parts on others.

Very sturdy and spacious build. Very comfortable height adjustment Built quality is good. It was very easy setup.

This is exactly what I was looking for. A large and long L-shaped standing desk that worked well, was made well, and didn’t break the bank. It is definitely best put together in a room that is mostly cleared and where you can easily place the desk after assembling because you will be doing most of the assembly with it desktop side down. The instructions were straightforward and easy to follow for the most part though I’d recommend at least 2 people assembling for a quicker build (I did complete it fully by myself but it was very tough and a little scary flipping the big thing by myself, definitely wouldn’t recommend that lol). The only downside was some of the underside corners were damaged in transit, however, it wasn’t that visible and I didn’t want to deal with waiting for a replacement and the desk was functional, so I asked for a partial refund and customer service from Ying was great and straightforward. All that to say it looks nice with the oak look and white legs, the motors aren’t terribly loud when you move it. Do make sure you get the rods situated all the way into their holes when assembling because if they aren’t securely placed, one side of the desk will not raise with the rest (may or not have happened to me lol). All in all, there are nicer desks out there BUT for me, you can’t beat the desktop surface area this provides and the quality for the price. I love all the desktop space I have!

I do love the desk but I have triple monitors and it’s a bit too much for the desk I think. It’s a bit wonky and the top is pretty thin and not 100% sturdy. It’s good for the price but I’d probably spend a little More for a more stable desktop.

As someone who has years of experience in wood work. I got a few pros and cons for this desk. Pros - Price fits the build of this desk. - The lift system is pretty solid and it glides really smooth. I like the reset option if you have any balancing issues. Movers had messed mines up. I thought it was toast until researched the reset feature. - Decent desk for someone who has a standard setup. Cons - One thing that jumped out at me was how thin the desk is. Not a big deal if this desk was made of solid wood or your setup is light. The listing says "Engineered wood" which on paper it is. But engineered wood that thin can bend over time from stress. The listing says up to 175lbs. But after 2 months with this thing the desk is already slowly bending in the center point from my two monitors desk mounts. Which I fixed by running some additional planks of 3/4 plywood from Lowe's. Which greatly fixed and even increased the strength. Even gave it a more thicker look. You dont have to run full sheets just need 2 planks. One for the front end and one on the rear end. - The cable compartment is cheap thin and flimsy. Dont even bother using it.

I was nervous to buy this item because I never buy furniture on Amazon knowing that it is difficult to return. But the reviews were high for both the item and the vendor. So I took a chance and I am pleasantly surprised! It's definitely much easier to build with two people, especially when you have to upright it. It went together fairly seamlessly. The tiny wood screws were a little cumbersome though. The box and pieces were well packed and protected. All of the items arrived and none were damaged. I programmed it to three heights: sitting, standing, and standing with a treadmill. I'm very happy with this purchase.

Previously I made a review about the desk where I gave it 3 stars. But after working closely with the company and sending videos to show the defect, they were able to send me further instructions and videos on how to fix the problem and troubleshoot it. Upon doing so, I ended up re-shipping the desk and getting a new one. The new construction was seamless since I knew how to proceed in the most effective way. Took me a lot less time and the desk works great. This desk is one of the best standing desks that is easy to assemble IF you simply follow the instructions to the tee. As I assembled the desk, I noticed the ingenuity and craftsmanship was truly well thought of. From the hole placements to the bearings, this desk was well designed. I would recommend this desk to everyone looking for a standing desk. The only thing I suggest about the desk is making the cord for the plug longer. If this desk is not against a wall near an outlet, the standing function becomes useless. Apart from the cord, this desk is A1.

Within a week one side was no longer raising and lowering. I reached out to the company and they sent me several help videos but none of them showed what was actually happening on my desk. I worked and worked with it and finally gave up. They were very nice to refund the money and didn't make me send it back since we had obviously thrown away the box after a week of it working. I gave it to my nephew since he didn't care if it raised or lowered. Also, very flimsy and there was no support under the left side so it was already starting to bow after only a week! You can't lean on it or it will bow further.

Took about 2 hours to assemble but it overall everything was well documented and explained. There is also a video that you can follow. Desk is good quality and works very well. I recommend this brand I had no issues. Sligh wobble when fully standing up but I think that will be the case in all standing desks.

Quality material. Holes in the wood doesn't align perfectly, some are off by millimeters(tolerable because there is a bend to the components as well), some are off by a lot and you need to screw in by hand. Drawer add ons would be nice maybe could be sold separately. 5 months update: Table top is very low quality and the steel skeleton doesn't support it fully. Only connection between 2 farthest legs is a slim rod running from the middle that are held together by the torque of 2 bolts. If only that flimsy rod would branch out to the sides to support the table top, it would have been sort of enough. But no, their screw points are very close to the middle of the table top so ANY weight you put on the wrong place bends the table top in a way that it angles itself to the weight you put in. Legs are trying to spread apart as you use the table, you have to pull them together from time to time. If you plan on using double monitor arm, you have to mount it very close to one the legs for the table to not bend. Even then it will bend the table but it will be tolerable. Table WILL TREMBLE if it has about 20kg's of monitors and stuff alike on top. I'm considering to rent a welding machine to improve the support of this excuse of a table.

Produit conforme à ce qui est indiqué et surtout reçu plus rapidement que prévu.

Excellente table, pour le prix cela explose beaucoup d'autres tables de tailles similaires tout en étant de bonne qualité. Le montage sans accroc, tout est bien expliqué et bien aligné. Le système de vérins est rapide, à voir sur le temps si il s'abîme ou reste fonctionnel. Ayant prit le modèle noir, j'avais un peu peur de l'aspect texturé au vu des photos, mais cela est finalement que très peu perceptible. Bref je recommande

The desk is decent for the money. The quality and the amount of wobble is what you would expect from this price range. My unit came with a few defects and is also a bit narrower than I expected but the dimensions do match: - Small chip in one of the boards - Misaligned mounting holes Also note that the transmission shafts are uncovered so you have to be more careful about cable management and any loose clothing while moving the table up/down. See photos See photos