ARES WING Dual Monitor Arm Desk Mount for 17-49 Inch Ultrawide Monitors, Heavy Duty Dual Monitor Mount Holds 44 lbs, Full Motion Gas Spring Vertical Stacked Monitor Mount, 75/100 VESA Mount, Black

Thank you to all the feedback and reviews others have left first if all. This stand is great and works very well! It's very strudy, tilts well and the instructions, while very minimal and wordless, did a great job of getting everything set up. The movement is sturdy and easy. Since my monitor was so large, you will need some assistance with making sure it snaps on to the mount correctly. It's not a one man/woman job with large monitors. The one up top was simple. I will say, please watch the instructions on how to tighten each arm as they aren't like mechanical arms where they just drop for adjustment quickly, they will hold but they'll move in different directions based on what your arm is doing. I did read that you can break the arms by over tightening, so please be careful. I didn't have this issue, as they are heavy and solid arms. I DO WISH - that they came with a longer pole base from the start. 45 + 34 is really pushing it as far as getting them to be firmly seated, but they're really close together as you see by the photos. The smaller pole base just doesn't allow enough height but it does work and still looks great. You'll find a balance.

Im not one to normally leave reviews but this stand is worth it. Holds my samsung g9 (49") and my alienware (27") well. Sturdy. The g9 is a heavy monitor but doesnt move unless i want it to.

I have one other monitor mount with a different design that does not allow for height adjustment anywhere close to this level. The pneumatic arm has become loose over time, down at the base where it attaches to the mount, making it virtually unusable for anything above 8 inches from the desk. I found this far superior design and ordered it to use with a 34 inch wide screen monitor and it performs even better than I expected. The design is as good if not better than any other monitor amount I have seen of this style or several other styles, and I highly recommend this product to anyone with a monitor within the quoted weight range. I will actually be ordering another one of these to mount my other monitor so I can have my main monitor at the height. I prefer in my slightly smaller and secondary monitor mounted above that. Right now, the other monitor arm mount that I purchased is forcing me to run my primary monitor above my secondary monitor. It’s actually not a problem with this due to the amazing adjustability of this product and the fact that I can easily tilt my upper monitor downward and set that angle by tightening a screw on the “swivel.” I will include a couple pictures to show exactly what I just described which I hope help people make their decision on whether or not this product is correct for them. Hope this helps! ***EDIT*** I was sent an email with a question about how well the pneumatic arm and tilt function works and holds the monitor where you want it to be. This monitor mount is the ONLY mount I have found that will hold a VERY heavy monitor, (within the specs of whatever is listed,) to actually hold that weight in place precisely where you want it, but also be able to adjust without a massive headache. There are a couple of different set-screws which adjust the tension on the swivel mount, and also the height mount, which allow for you to make it easier to adjust, or for a lighter monitor. I set the screws fairly tight, so my monitor holds in place precisely where I want it to be since it is a 34 widescreen model, and a little north of the halfway mark for the weight limits. I don't remember the pound limit off the top of my head, but when ordering this product I remember that what I have was a little north of halfway. I think my monitor is something like 20 pounds or so. This mount will clearly hold something twice that heavy, with ease. I truly cant recommend this product enough and will be buying another one fairly soon for a third monitor I am purchasing. Hope this helps the man who asked the question, since I cant find the email to respond to his question anymore. Cheers!

Somewhat easy to put together. Only saying that because to be able to move the mount once you set it up, you will have to take it completely apart due the adjust screw is inside the pole that holds monitors. Other than having to undo everything 3 times until I got everything as centered as I could before getting tired of lifting a 49in monitor on and off and lining it to the clips. But once setup it’s a amazing mount and looks great with a very good range of movement.

Just what I wanted. Been waiting long time to find a good multi monitor mount. Love it so far freed up space cable managements and stable.

If you want to pay for an expensive mount just to have an installation nightmare... be my guest. I somehow ended up getting it to work in the end, but only because I improvised. I could tell that the item I got was not new and in fact returned due to the arm that positions your monitor's tightening screw being stripped. I've never run into this with an allen wrench install before. It's because the one they provide is rounded and too loose a fit. If you want the install to work, use your own. The instructions actually have a warning that tell you not to tighten it too tight, with no mention of what the consequences are. Let me tell you those consequences... you will BREAK IT. Both of the arms have hydraulics in them... so if you break this part (which at this point you probably have a REALLY high chance of getting one that's already broken since Amazon states this is a frequently returned item), you will be left with a mount that can not be adjusted vertically, and it will just stay propped towards the highest position. I spent an ungodly amount of time inadvertently working out my arms just because I had to push the hydraulics down to allen wrench a screw that was doing absolutely nothing no matter which way I turned it. The way I worked around it was by putting the broken one on top, since the top position doesn't really need to move lower. The hydraulics were a good idea, but the implementation of the tightening and the extremely cheap tools provided for installation made what should have been a super easy install into a nightmare. If you got to the same steps I did and decided to return this, it would have been way worse because you would have had everything pretty much done just to take it apart... and if you took your monitors down already and prepped the mounts... it would just be a big waste of time and energy. So that's why I kept it, to maintain my sanity. But save yourself the trouble and buy just about any other mount because they are rarely this bad.

Excellent! Was pretty simple to install. Since I have a pretty large monitor you have to make sure that the base and clamp aligns with wherever your monitor sits in the middle of your desk. Otherwise you would need to take off the monitor, put it back on and make adjustments.. Otherwise great product! Definitely a huge upgrade going from the monitor stand which took 50% of my desk depth. Very sturdy and offers great movement.

Easy to set up, we'll built and adaptable to different surfaces. It works perfectly and I love its wide range of flexibility.

I bought this mount for my 43-inch monitor and was a bit skeptical about whether it could handle the weight, but it’s actually pretty solid and holds up well. One downside: the plastic cable holder was broken out of the box. I ended up gluing it back since it didn’t seem worth the hassle of returning the whole thing for such a small issue. Overall, the mount does its job and feels sturdy where it matters

The mount is questionabley secured to a glass tabletop desk with a metal frame that I had to cut so I could accommodate the included clamp. There's one step not in the instructions that I found helped snug the base to the desk and thats by putting a nut on the long screw when installing the base, without it I probably wouldnt finished installing.

bought a second one because it was sooo good and was as described