AGM Global Vision Rattler V2 19-256 Thermal Imaging Rifle Scope | Thermal Scope with 950 Yards Detection Range and 2.5X Base Magnification, Ideal for Hunting

The value that this scope offers is amazing. When purchasing this scope, I had the opportunity to also try the TS25-384 (v1) and TS25-256 (v1) also offered from AGM. Comparing this to the more expensive TS25-384 (about $700 more at the time of this review), there were only 2 negatives. First, the 384 thermal sensor does offer a slightly sharper image, especially at closer (sub-25 yard) distances. Second, the 384 has a lower base zoom and therefore a wider field of view. For my purposes, the wider field of view while also maintaining a sharper image is definitely noticeable and preferred. However, at almost double the price, I don't think the performance per dollar increase is worth it. One exception, that might make the lower zoom and higher resolution worth it is if you plan to also use this scope for home inspections as you can see things like studs and screws a lot clearer when you are within a few yards of a wall. On the flip side, with the V2's increased base zoom and increased thermal sensitivity (from 17um to 12um) at almost half the price, it's a great value option. If raw performance is your goal, the TS384 is still a great scope. I'm sure the V2 384s are even better for a few hundred more. Lastly, although the rechargeable battery does make the V2 slightly heavier and larger on paper, using them side by side, it wasn't really noticeable. Although other reviews have listed the rechargeable as a win over the V1's CR123 (which can be purchased as rechargeables at about 1/2 the single use capacity), I don't think you can discount the advantage of having a practically limitless power via a pack of CR123s. If you won't have access to power for an extended time, single use batteries might be an advantage. Comparing the V2 to the TS25-256 V1 wasn't even close. The biggest noticeable difference was the refresh rate. After having used the 50Hz on the 384v1 and this scope, the 256v1 seemed clunky and jittery. In addition, with the 265v2 scopes now coming with the same 5-year warranty as the 384/640 scopes instead of the v1's 3-year warranty, I can't see a good reason to purchase the 265v1 even at the current discount of $150 off). The controls can take a bit of getting used to but the manual did a pretty good job at explaining the various functions. My biggest con (if you can even really consider it a real con) is that I wish the buttons had at least the option to program a custom operation. I'm sure that could be addressed in a firmware update, but even without, the scope is a solid purchase. I have also noticed that the measure function is extremely sensitive to shaking so using it in a handheld configuration (while trying to press the button) can be very tricky and cause pretty large discrepancies. The remote view is really nice and doesn't just allow you to see what the scope is seeing, but also adjust some of the settings (brightness, contrast, color palette, etc.), start and stop recording, and remotely view the captured media. I also changed a few settings that seem to have made the scope a more solid experience. First, switching from recognition to jungle will help in dense foliage. Second, switching the FFC (flat field correction, aka the shutter click) from Auto to Semi-Auto would be a must for hunting (which is actually recommended in the manual as well). While the Auto mode does give you a 5-second overlay warning (if you notice). There's nothing worst than the FFC triggering right before or during the trigger pull. I have left mine in Semi-Auto and when I start to notice dots/floaties in the image, I'll long press the "M" button to correct. Whether you leave it always on Semi-Auto or not, definitely switch it to that when you are getting close to your shots. All in all, a solid scope and a crazy value for the price. Well done AGM!

After researching thermals for over 2 months, I decided on the AGM V2 TS19-25. This is my first thermal purchase. I wanted something that wouldn’t break the bank, had decent clarity, had a good field of view, and a good warranty. I purchased this to go on a suppressed .22lr. I watched a ton of YT videos on various thermals. I can tell you that what I see in the scope is way better than the videos. This is the perfect thermal for 125 yards and in. Although I can see things much further away, identifying them is another story. I might end up setting up another profile for a 300 blackout build and swap it between the 2. (You can set up multiple guns, reticles and sight in yardage’s) I’ve been playing around with it the last 2 days during the day and night. I have the brightness set at 7 and contrast at 5. First set the diopter focus at your eye so your screen information is clear, then set your objective focus to your target. After 30 minutes of use, I can confidently press the buttons for the menu and navigating around various settings without the need to look. It’s very intuitive. After charging the batteries and using one for a couple hours, the battery still indicate 4 bars (full) Comes with 2 batteries, cable and a charger. The digital zoom goes to 5x-10x and 20x. I find the 10 and 20x are not useful and picture gets to pixelated. Also comes with a great ADM QD mount. Pretty sure it’s at least $150. Everything is packed in a nice storage case. Now I can see all the critters in the woods at night that my dogs keeps barking at. If you’re a hog or a coyote hunter hunting in open fields, I’d opt for the 384 or 640 version. I’m very satisfied with the scope at this price point.

I love this optic so much. It depreciates faster than glass but it's well worth it for what you get. Smooth and easy to use. Very quick target acquisitions in pitch black and no signal emissions if wifi is off. Quite big on an 8.5 but 10.3 and longer is fine.

For me, I wanted a 19mm scope in particular due to the FOV (Field of View) - if AGM made a 384 in 19mm, I would have preferred to have purchased that option. For our area here, we rarely have an landscape that goes over 200 yards. Additionally, the 19mm 384 scopes out there that exists are with companies overseas, so I don't see that as being the best option due to support. I've had some 256, 320 and 384 products, and for a 256, it meets and comes close to the older 384 technology in my older devices. That was the most suprising part. I have an older 320 that doesn't have the resolution of this 19-256 V2 version. One 256 I owned was unuseable from another US Texas Thermal producer, I had to return it, so I was cautious when ordering this one. To my pleasure, it was more than usable and works fine at 100 yards, even smaller objects (dog sized/cat sized/varmit) are distinguisable. The visibilty on this scope is more than enough if you are tree dominant mountains like we are here. I expect I'll most likely have to use the jungle option here in the summer over recognition mode. If you are in the Southern Appalachians, this particular scope or the 25-256 will be what you need - I think their other offerings may be more than one would need for the money in that particular environment. ADM is a good mount, I already use those - so I was familiar with the locking system - so that was good. For the price, it's a good American scope and a good mount, those are positives. What I don't like about it is the battery compartment. There is no real positive lock, it is either shut or it isn't. Having owned more than one AGM, the other issue I ran into was the battery. Now, I've not seen this mentioned in very many threads, comments or reviews - however, this one has very bad vampire drain. I spoke to AGM in Texas on the phone about it. As usual, the person on the other line assumed it was a user error. However, this isn't my first time using an AGM product, firmware or software interface. The device doesn't shutdown properly. The LED on the top goes out, as it should, however, if you pick the device up the next day, the battery is dead. The solution from the tech was to engineer hold for 5 seconds - meaning, you don't release the power until the screen shuts down. While I've never had to do this before with another AGM product, I plan to take his advise and see how it goes. For people having issues viewing - if the image is blury, try the diopter first, get that as clear as you can and then focus on the front adjustment. That should clear up the image. Also, I didn't find the zeroing part ridiculous, it's just that the use needs to understand the basic controls going in to the zeroing part. If you don't, you'll be frustrated. Once you figure that part out, zeroing shouldn't be an issue. I would suggest buying some additional thermal targets that are self adhesive - that way, you can just cut off a section and use that to help you zero on the provided target. Weight wise, it's OK, not phenomenal, but OK, I have some premium LPVOs that weigh close to it, so it works for me. Reticle wise, this V2 has far better options than I've seen on other scopes in this price point. Again, if they made a 19mm 384 or 640, I would have bought those. Still, in our area, very few shots will take place past 150 yards and at most 200 yards, so I didn't need the features many Texas hog hunters require. Will update you all on the battery situation as we troubleshoot.

First venture into thermals. I definitely made the right choice. As an older gent who is uncomfortable with electronics I found the learning curve to be uncomfortable to learn. As I progressed I now can breeze through any adjustments I need to make. My only issue is wishing the pixelations were better, but that is the sacrifice one makes when buying the cheapest model. My use for this model is within 100 yds making the 19-256 adequate for my needs. More than happy! PS, battery life is as usual, a little less than advertised, but adequate for a night of hunting. Maybe buying a third battery to be sure to get thru an entire night would be prudent.