Smart Battery Shunt - Battery Monitor (Bluetooth) - Victron Smart Shunt with Detailed in-app Insights - 6.5V-70V, 300 amp

I bought the Victron Energy Smart Battery Shunt to add Bluetooth monitoring to my battery power box, and so far it has worked really well. I haven’t noticed any interference or RFI issues, though I don’t have a precise way to test for it. I’m happy to have this separate smart shunt rather than relying on built-in Bluetooth on a LiFePO4 battery. The setup was straightforward, and the detailed in-app insights are very helpful for tracking battery health and usage. Potential Uses: Monitoring home-built battery power boxes Off-grid solar systems and battery banks RV, camper, or marine battery monitoring Ham radio or portable electronics power setups Tracking deep-cycle battery health and usage Measuring current, voltage, and state-of-charge in DIY projects Managing multiple 12V–70V battery systems Disclaimer: This review reflects my personal experience only and is not professional electrical or technical advice. Always follow proper safety procedures and consult a qualified professional for installation or use of high-capacity batteries and monitoring devices.

Victron solar equipment is high quality and this shunt is no exception. Very easy to install and the included cables are a plus. Integrates flawlessly into the Victron app and gives all the information about the usage and states of your batteries that you need. The only drawback, as others have stated, is the short range of the Bluetooth signal. But that seems to be the case with a lot of these type devices. I’m pleased with the device and the price was reasonable.

* Measurements are pretty accurate. * The app is handy, with lots of information and useful trend data. * Integration with other Victron equipment is very nice. * It has been working flawlessly for over a month now.

I’m very impressed with how well this works, I just ordered a second one, very easy setup, The bluetooth range needs to be increased and I would like to have a cover to prevent contact with the terminals

Works great just as described

Doesn't work well when joined to my other two Victron solar charge controllers. Bluetooth has very short range compared to my other two devices. Build quality for cable attachments are very good.

As usual, Victron continues to provide exceptional quality, fit, finish and utility. Installation is a simple, straightforward process that requires only one additional short cable of the proper gauge for your setup. The included positive wire and secondary positive (for monitoring a second battery bank or midway point) have built-in fuses. One note - the bolts on this require 5/16" or 3/8" wire lugs on the wires from the negative battery terminal and to connect the load or bus block. The shunt itself is very sturdy, and designed for easy mounting in a small space near your battery. It also networks wirelessly with other Victron Smart controllers and other products over Bluetooth to allow them to share information, via the VictronConnect app. A few minutes of reading is all that's necessary to input the battery information and other parameters via the app, and before you know it you're up and running with detailed information that assists greatly with fine tuning your system. You may, like me, find yourself wondering how you ever got by without this addition to your solar power system. I put it off, questioning whether I really needed this. From now on, I'll have one of these on every system I install!

This is used for a single lithium battery. The battery's BMS appeared to be accurate, but with more testing, it was too erratic on SOC. Reading the manual, the BMS can't detect low discharging and charging. I purchased and installed the Victron shunt so I could get accurate data. The installation was straightforward. If it won't be exposed to high moisture, I prefer this one. The IP65 version has all possibilities of sensor cables potted in. On this one, you only connect what you need and terminate wires to a neat length. I appreciate how much more accurate this is than the BMS. Areas for improvement are the speed the Bluetooth syncs. Opening any other Victron device and the Bluetooth needs to re-sync every time. Distance is also marginal, it should work in a bigger radius like other Bluetooth devices. For the price and simplicity, I am glad to have it for the times when battery data is critical.

Perfetto, molto semplice da installare se si ha manualità ovviamente. Gestione da app eccellente, mi raccomando seguire le istruzioni del manuale on line per i settaggi della batteria, se è al litio ci sono dei parametri da modificare, na li trovate nel manuale. Victron è sempre una sicurezza.

Le module enregistre 45 jours de données aux on ne peut accéder qu'en bluetooth depuis l'application. L'exportation est totalement verrouillée par Victron, il faut ajouter un Cerbo gx qui coûte 300€ et ne permet d'avoir les informations qu'à partir de son installation. Je n'en reviens pas

Pues está bien caro pero es funcional, te permite saber el estado de la batería así como la tendencia histórica de 6 meses hacia atras El único tema es que el tornillo está muy gordo y no entra el adaptador de mi bateria, ojo… esto no corta carga ni actúa como gestión de la batería, solo es para observación

El SmartShunt 300A 50 mV es un monitor muy recomendable si quieres un sistema limpio, confiable y conectado, ideal para paneles solares, baterías de litio/AGM/Lead en autocaravanas, embarcaciones o instalaciones independientes. No es perfecto para todos (especialmente para instalaciones grandes donde 300 A se queda corto o si necesitas pantalla integrada), pero en su segmento es difícil encontrar algo tan completo y sencillo de usar.

Qualität die man von Victron erwartet. Vom auspacken bis zur Installation und Inbetriebnahme ist alles durchdacht. Der Artikel funktioniert sehr gut.