
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Vietnam.
โก Power your projects smarter, faster, safer!
The AITRIP 5PCS USB-C PD Trigger Board Module is a compact, high-performance power delivery booster supporting up to 100W output with adjustable voltage settings (5V to 20V). It features smart USB-C forward/reverse detection and robust safety protections against overheating and over-voltage. Ideal for professionals upgrading devices or DIY projects, it ensures reliable fast charging and versatile compatibility with USB PD and QC protocols.
| ASIN | B0D14D8PQZ |
| Best Sellers Rank | #277,099 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #1,198 in Power Converters |
| Brand | AITRIP |
| Color | 5 PCS |
| Customer Reviews | 4.5 out of 5 stars 56 Reviews |
| Input Voltage | 5 volts |
| Manufacturer | AITRIP |
| Model Number | beb128a8-f1e4-4bb7-90d8-e8b1a7606fc1 |
| Number of Items | 5 |
| Number of Outlets | 5 |
| Output Voltage | 20 volts |
| Plug Format | Type C |
| Plug Type | Type C |
| Power Source | USB-C PD |
| UPC | 687117741035 |
| Unit Count | 5 Count |
| Warranty Description | 1 |
T**N
Works for at least 2.4A. The LED is hot to the touch.
This review is for 3PCS USB-C PD Trigger Board Module PD/QC Decoy Board Fast Charge USB Type-c to 5V9V12V20V High Speed Charger Power Delivery Boost Module. As of this review the product listing is not mixed with other products, only the 3/5/10pc variants. So far I have used this in 2 projects to power my gears with USB-C instead of various barrel jacks. One is Sony Blu-ray player BDP-S6700 that takes 12V/1A. The plug for these Blu-ray players is EIAJ-04 / EIAJ IV / Philmore 2559, something that is not widely available from Amazon, and those you can find charges more than this 3pc set. So I directly soldered wires to the circuit board to power it using USB-C. This leaves a pigtail to the player but I donโt mind. The USB meter says it draws 0.75A max while playing and this trigger board handles it well. Just note that 12V is something not every charger will provide since it is optional in USB PD specifications. It also works with my QC charger (again, check if it provides 12V at all). The other is Optoma ML750 projector. The projector takes 19V/3A. Using the 20V setting it also powers it fine. The original barrel jack measures 6mm as the outer diameter, but I used a 5.5 x 2.1mm jack and it works, it doesnโt have that nice click when plugged in but it is not loose so the projector will turn off either, so I donโt have to look for the exact dimension of the plug used. The USB meter says it draws 2.4A when the fan is in high gear, which is not something every such USB PD trigger board can do. I donโt have a project that draws 3A or 5A to say it will be fine in those situations but 2.4A is no problem. There is this red LED that lights up when it is powered. Even with no load the LED is hot to the touch. The chip thatโs next to it is not hot even powering my projector. This board is great in that no soldering is needed, with the obvious tradeoff that the voltage selection switch and the output terminal takes more space than if you just solder it directly to the board. Next Iโm going to wire this to power my Asus fanless laptop UX305 that takes a 4.0 x 1.35mm barrel jack - Iโm just waiting for that jack to be delivered. That one is 19V/2.37A so Iโm sure it will work too since the current is less than my projector. No need to rely on different power supplies!
B**O
Excellent value. Versatile Power Delivery.
These little guys are phenomenal. You can torture them with quite a bit of current flow. I managed to use one of these in 20 Volt Mode to power a BT Chip Amp I bought also on Amazon. My battery bank was tracking upward of 90-100W of draw from the C Port. These little things really deliver. Plus they have huge solder pads underneath the Phoenix connectors so if you prefer direct connection.. unsoldering the green part is very easy. My only complaint would be the excess protrusion of the PCB leads. I had to flush cut every single one I got because they are a little longer than desired on flush surfaces.
R**N
Excellent little trigger modules
These boards are terrific when used in conjunction with a good USB-C adapter/charger that can provide whatever voltages are requested. The three switches are a far quicker and easier solution than the "programmable" variants of these modules, and the screw terminals make it easy to quickly connect whatever you're powering. They come with no instructions, but it only took a few minutes with a test meter to determine the switch positions for each voltage. Those positions are (0 = off, 1 = on): 1 2 3 Switch 0 0 0 5V 0 0 1 5V 0 1 0 5V 0 1 1 5V 1 0 0 15V 1 0 1 20V 1 1 0 12V 1 1 1 9V One thing to note, there are no mounting holes on these boards (they're simply to small to include holes) so if intended to be mounted in a box or small appliance you'll probably need glue, a strap, or some similar method to fasten them in place. I may investigate using some flexible plastic tubing (maybe 3/4 inch inside diameter, 1 1/4 inch long) to secure these.
M**G
Very nice compact supplies.
Nice little supplies for small projects. Only 4 stars since one of the ten would work at 5 and 9 volts but not 12 volts.
P**.
10PCS purchased, had to decode switches
Great modules, great price at 10 PCS, however, the description isn't clear on how to configure the switch-block. Since I couldn't find a manual online, I used a USB C PD charger that could handle all the voltages properly and used a voltmeter to verify. Yes, you can hot-switch between voltages. Here were my switch configurations, and with this disclaimer: be sure to verify your voltage before powering your device. A '1' in this table indicates 'ON' in the switch-block, 'X' is don't care, for the switches in 1-2-3 order: 0XX : 5V 100 : 15V 101 : 20V 110 : 12V 111 : 9V
A**E
No soldering required!
I have been making/ customizing toy cars and tanks for my GI joe Classified figures. Using these to provide LED light and RC car power (via USB and battery pack). These USB boards fit anywhere and work great. I fully intend to buy more when I start to run out of these.
A**L
no 12V signal.
I don't know if I got a bad batch. Hoping someone here can tell me. Here are my readings. 0xx 5v 100 15v 101 20v 11x 9v I am not getting any setting to give me 12v
M**S
A must have
A little big for tight spaces but works great for converting barrel plugs to USB C. Rip the 12v barrel plugs.... Everything should be USB C!!!
Trustpilot
4 days ago
2 weeks ago