Hook Magnet Side View Mirror Set for Borescope Endoscope N005 N013J N015 series

This overcame the problem that the endoscope that they fit has limited flexibility. However, I would have liked some instructions or labeling to say what each does. The hooked one was a conundrum until I needed it. It allows you to see the object. Then you can pick it up or move it. The other problem was a flare on two of the mirrors that rendered about 25% of the reflected area useless.Even with these small problems I highly recommend it. I was able to see into the piston on my car and see that the problem was a burnt valve. Not good news, but it helped me to narrow down my options.

All except the 30 degree one screw right on to the end of the Bluefire 7mm endoscope. The 30 degree one is too big, and would come right off if used, but if you desperately wanted to use it could probably form some kind of gasket to make it snug. I see the magnet one as being ultra useful, as you can not only find lost screws and other metal parts as other magnets will do, but see where they are located instead of having to blindly fish for them.

I really can't complain too much, because it was cheap. They do function, but they could be better. 2 of the mirrors seem to have bad threads, so they don't screw on all the way. The hook and the magnet have a large lip that covers the LED lights on the camera. If you leave the lights on, the reflection washes out the picture, but if you turn them off, you need a secondary light source to see in dark places. The mirrors are cheap Mylar stickers, so cleaning them off just scratches them and makes them useless eventually.

This works great! If you have an endoscope, these items are a must have! I'm giving it 4 stars, instead of 5, due to that when you are using the magnet, it restricts your field of view! Other than that, I give it 5 stars all the way!

Works well with my pinhole USB camera. I have not used the mirror ends yet, but the magnet and hook work fantastic for finding and picking up those lost bolts and screws in engine bays.

Three mirrors did not fit the threads of the camera it was intended for (BlueFire 7mm 5-Meter android OTG Endoscope). Had to use a small piece of electrical tape to keep the mirrors attached because the mirror diameters were a tinge oversized and therefore would not screw on. If the light has to be bright, the mirror will reflect dirt/dust back into the camera, so the mirrors must be very clean. The threads of the magnet and hook both fit the threads of the camera fine. It turned out that I didn't use the mirrors but tied a string at the tip of the camera to move it in the desired direction.

I used these for retrieval purposes with Supereyes NO125 2M/ 6.5 FT. The angled mirror adapters are not very clear and all of the adapters lessen the amount of light significantly. However, the hook and magnet are worth the purchase alone!

Works ok

Had to recut tread on 2 of the mirror heads now works ok.

L'aimant m'a déjà sauvé une fois...Pas encore utilisé les autres accessoires, mais un petit essai avec un miroir : il ne faut pas mettre l'éclairage trop fort au risque de perturber la vision (les les se reflètent dans le miroir en créant une aura qui empêche de voir, donnant l'impression que le miroir et sale).