Deep Pour Epoxy Resin Kit 51 Oz – for 2” Pours, Casting Resin Epoxy for River Tables, Wood, Flower Preservation & DIY Crafts – Crystal Clear & Bubble Free, UV Resistant & Food Safe

I’ve tried many resin brands but Craft Resin is by far the best out there! Their deep pour epoxy has excellent clarity with no bubbles in sight. You have a long working time and NO ODOR at all. The finish product is strong and crystal clear with no cloudiness. Cure time is about 48hrs which is normal for deep pours. Craft Resins Deep Pour is absolutely worth it. It’s reliable, consistent, and produces a finish that looks high-end every time.

I’ve worked with many epoxy resins over the years, and Craft Deep Epoxy Resin is hands down one of the best for deep pours. It mixes smoothly, levels beautifully, and cures crystal clear with zero cloudiness. The viscosity is perfect for river tables, large molds, and thick pours—no rushing, no panic, plenty of working time. What really impressed me is the minimal bubbles. Even without aggressive heat, bubbles rise and release easily, which saves time and stress. Once cured, the finish is rock-hard, glossy, and professional-looking, with excellent color clarity when pigments are added. No strong odor, consistent results, and reliable curing every single time—this resin delivers exactly what it promises. If you’re serious about high-quality results and want a resin you can trust for deep projects, this one is a winner. I’ll definitely keep it as a staple in my studio.

This deep-pour resin is great! It mixed easily and smoothly, and bubble-free! It's a slow cure, but that gave me plenty of working time with it. Color poured and cured perfectly clear and colorless. There were no odors at all, which I appreciate! Very happy with this product.

I gave the Craft Resin deep pour a try and I'm not disappointed in the resin. I poured a set of dice and a small skull with no colorants and no mechanical de-gasser to see how clear it pours and cures and it is very clear. The skull was an open mold and just shy of an inch deep. The large cavity cured clear and 97% bubble free. There were micro bubbles that gathered around the eyes and cheek bones where there was a ledge in the mold. I should have gone in with something after a few hours to eliminate them, but I wanted at true unaltered test. The dice were poured in a closed mold and, unfortunately, there were some large voids at the top against the mold cap. Again, I could have waited longer to cap it, or looked at it after a few hours to remedy it, but, same as the skull, I poured it as I would with any other resin and just let it be. Again, the interior of the dice are clear of bubbles, but there were some accumulated on the corners. It did take longer than 48 for it to be solid enough to demolish, but that may be on me because my house temperature is set to 70 degrees F. I did also pour a deep egg that measures 3.5 inches deep. I used colorants and poured in 2 layers 18 hours apart. At no time that I randomly felt the mold did it get hot or even warm. It is still curing and I can update when I demold it, buti was very glad that it remained on the cooler side. The only thing that I am disappointed in is the lack of certain information that may have helped in planning my pours or aiding in bubbles. Without messaging customer service, I was unable to find a pot time or a direct de-mold time. I am looking forward to trying out more of my deep molds with this resin, but will also be sure that I'm not on a time crunch when I do.

I’ve been using craft resin for a while now and I have to say I have never been disappointed. I wanted to try out the deep pour in a smaller portion to try, so that I can get a big set and make my wedding flowers into a small side table, coasters and clock set. This resin is easy to work with and sets clear. There was no cloudiness, no odor and very minimal bubbles (even though the bubbles might have been my mistake). I tried it on a coaster for a teacher friend and it’s so clear. The price is great and I’m definitely going to continue to use Craft Resin.

This was my first time ever working with epoxy, and I'm so happy with the results. I wanted to preserve the flowers from my mother's spray from her casket, so I REALLY didn't want to mess it up. After watching lots of tutorial videos and reading lots of reviews, I chose this crystal clear deep pour option. It was very easy to work with and there was no smell at all. It was a little messy/sticky, but I wore gloves, covered my work area, and cleaned up immediately afterwards. I made sure that my flowers were completely dried before I began, warmed the bottles each time before use as recommended, made sure I mixed to the precise 2:1 ratio, stirred in one direction to minimize bubbles as recommended for 5 minutes each time, and I poured in thinner layers over several days. I did have a few bubbles, but I monitored after each pour and was able to pop most of them before they hardened. After my final layer I left it to cure for a full 48 hours. They very easily pulled out of the molds (I did use mold release spray that I'd seen in tutorials but don't know that it was necessary) and were completely hardened. One thing that I will note - and I have emailed the seller and waiting for a reply - as other reviews mentioned, I did not have enough hardener for the amount of epoxy, even though I was very careful and precise in my measurements. I originally purchased the 1.5 gallons but needed a little more so I purchased these smaller bottles. I had to use this bottle of hardener to finish out the epoxy from the original purchase, so now I'm left with almost a full bottle of epoxy and very little hardener left (see last photo - the hardener bottle should still be half full for that amount of remaining epoxy). That would be my only complaint about this product, but overall I'm thrilled with my results. As a first time epoxy user, I highly recommend this product! **Edited to add - The seller quickly responded to my message and sent me another set at no charge. Could not be happier with this product or this seller! Highly recommend! 5+ stars

Hobbymäßig arbeite ich sehr viel mit Holz und Harz. Deshalb habe ich bisher auch schon zahlreiche Projekte mit Harz umgesetzt vom ganzen Tisch bis zu kleinen Murmeln habe ich schon verschiedene Harz-Systeme verwendet. Bisher hatte ich oft das Problem, dass große Blasen im Harz bleiben oder das Harz sich nach langer Zeit gelblich verfärbt. Aufgrund des guten Preises und der versprochenen Eigenschaften, habe ich für meine aktuellen Projekte mal das Harz von Craft Resin ausprobiert. Schon mal vornweg, es ist das beste Harz was ich bisher verwendet habe. Es lässt sich einfach verarbeiten. Harz und Härter mit einer Küchenwaage je zur Hälfte mischen und anschließend vorsichtig einige Minuten gründlich verrühren. Am besten nicht zu schnell rühren um blasen zu vermeiden. Anschließend kann es verarbeitet werden. Nach 24 Stunden ist es bereits vollständig fest. Neben meinem Kopfhörer-Ständer der mit diesem Harz ausgefüllt wurde und den Ständer auch von außen schützt, habe ich das Harz auch noch für andere Projekte verwendet. Der größte Pluspunkt dabei ist, dass es wirklich glasklar ist. Man sieht es bei den Rohlingen (wird wohl noch Schmuck draus) die ich zusätzlich gemacht habe auf den Bildern. Ein großer Vorteil des Harz-Systems ist auch das es sich selbständig entlüftet. So verschwinden größere Blasen in der Regel von selber. Ganz kleine Blasen bleiben aber manchmal noch drin die dann im Harz eingeschlossen bleiben. Dies kann man jedoch vermeiden, wenn man keine hohe Gießhöhe hat. Laut dem Hersteller kann man bis zu 5 cm auf einmal Gießen. Das hat bei meinem Versuch auch super geklappt ohne das es zu warm geworden ist oder aufgekocht ist. Zusätzlich kann man dem Harz auch Pigmente beimischen um verschiedene Farbakzente zu setzten. Es lässt sich super schleifen und wenn man am Ende noch eine Schicht Harz über die geschliffenen Bereiche macht wird es auch wieder glasklar. Für kleine Projekte wie Schmuck oder kleinere Bauprojekte ist dieses Harz super geeignet und es verblüfft mich, dass es wirklich so Glasklar bleibt. Das habe ich bisher noch bei keinem meiner verwendeten Harz-System gesehen. Auf jeden Fall kann ich dieses Harz mit gutem gewissen weiterempfehlen und werde es auch noch für einige Projekte bei mir in der Werkstatt einsetzten. Preis-Leistung ist top daher gibt es von mir 5 Sterne für das Harz-System von Craft Resin.

Fantastic quality as expected with Craft Resin, its a 1:1 mix which makes it incredibly easy to follow, large openings to prevent mess, it sets solid. The viscosity is great for many crafts and allows for a steady poor. Not too thick and not too thin. Keeps projects clean and tidy and it looks brilliant.

Sarà che ho capito male io che non venisse spedito dalla Unione Europea, comunque sono rimasta un po' visto che ho dovuto pagare 13€ di dogana. La prossima volta prenderò un altro fornitore.

Bom preço e qualidade

بصراحه منتج رايع وسهل ولايوجد فيه فقاعات وكانت هادي اول تجرّبه لي ممتاز