Antec Flux Pro, 6 x PWM Fans Included, High-Airflow Front Panel with Walnut Wood, iShift PSU 90° Mount, USB3.0 x 2, Type-C, 420mm Radiator Support, Temp. Display, Full-Tower E-ATX PC Case

I was building a new computer and this was released at the same time. Some good reviews showed up on well known Youtube channels so I took a chance. It's an amazing case. It's very modular in how you can change things. They thought of almost everything. Plenty of space to fit anything you want and easy to work inside. The fans are already wired to a fan controller and cables are managed. Easy to install fans or radiators on the top and front since the bracket comes out. I had no problems wiring everything and nothing was pinched. You can fit a ton fans and still not be cramped. Water cooling would be easy in this case.The exterior has a really nice texture and the wood accent isn't obnoxious. It does move a ton of air. I put all fans on full and left the side panels off and I could feel air across the room. Once I set the fans to PWN they acted normally and it still has a ton of airflow. It's mostly tool-less except when you move some brackets around for fan mouning.So far it's quiet and cool. Even on heavy games with fans ramped up it's barely noticeable. I didn't think I would be this impressed since it was a new release but Antec released an incredible case.

The Flux Pro is hands down the best case I have ever personally come across in years of building PCs for myself, friends and family.- Nicely shipped, comes in a box with molded foam padding holding the case securely in place.- Includes plenty of screws etc. for various arrangements, multiple SSDs, as well as a nice transparent plastic screw case/organizer with movable separators.- Spacious and easy to build in. Plenty of space for large CPU coolers and GPUs. Comfortably fits Noctua NH-D15 with room to spare.- Great options for cable management inside the case with preinstalled loop straps for cable bundling. Existing cables inside the case (e.g. for front panel) are very well managed also.- Included fans are very efficient and high quality, getting 6 of them included makes this case not only great quality but also a great value. They come pre-installed and hooked up to a small daughter board near the front/top panel with nicely routed cabling.- Excellent and quiet air cooling performance. Using AMD 9800X3D and NH-D15 cooler, Sapphire AMD 7900XT GPU with default curves on the case fans, baseline 40% on the NH-D15 up to about 60C and an aggressive curve ramping quickly to 100% by 80C. The resulting system is totally silent for basic use and nearly all gaming loads; fans only become audible under very CPU heavy loads like code or shader compilation. Most of the time the GPU fan (and some GPU coil whine...) are the loudest thing in the system. I rarely ever see the CPU above about 65C, and even maxing out all cores I simply can't get it much above 76C with instant peak of 81-82C before fans catch up. Of course the 9800 and Noctua also get credit for this, but it's truly impressive how quiet it is.- The HDD rack in the lower bay is easy to completely remove if you aren't using it, for slightly better airflow from the two lower fans pulling up through the bottom of the case.- Power supply is easy to install with plenty of room for dealing with cables thanks to the large mostly empty lower bay.- The mesh front panel and small holes on the bottom panel do a good job of minimizing dust in the case. Not perfect, but very good given the outstanding airflow of the case. The spacious interior also makes it easy to clean.- The USB ports and power button on the top/front panel are solid and firmly mounted.- The CPU/GPU temperature display works well (with required software installed) and is kind of cool.- I didn't really care about the wood accent when I purchased, but it looks quite good and is a nice "premium" touch.- No quality issues with my unit of any kind.A small nit, but depending on the arrangement of your motherboard, the cables from the front panel may be very slightly on the short side. Not really a problem, but for one of the cables from the front panel I had to basically force a shortest path diagonally across the back of the motherboard (ignoring most cable management) to be able to reach the far left side of the bottom edge of the mobo.

As my title says. The space you get in this case is literally insane. The case is not that big either, they just know where to put panels and how to size things appropriately. The case has the best build quality I've ever seen as well! All panels are thick and high quality! All screws are great quality as well. All panels use snap fittings and they keep things in place well; I have no doubt they will hold up. The side panel is tempered but not tinted (this is a huge deal as the side glass almost doesn't even look like it is there!)The case is super easy to work with, and I had zero issues fitting my water cooling stuff in there. It really feels cavernous inside but it isn't that big for a full tower case. The fans are high quality as well, and you pay for them! The bottom 2 fans are amazing. They push so much air into the case even at low rpm! It is basically as though they are pulling air with no restrictions... I need to get some more of those for my other cases. Temperatures are great! I have never had lower temperatures. Did I mention the thing is almost dead silent with fans at 900 rpm? I also have absolutely no scratches or imperfections anywhere!?The price is great! You get 6 Noctua level fans worth at least 90 bucks (I would know: I own many of them), the perfect case layout, wood (mine has tasteful yellowish wood on the white model), tempered side glass, tool-less entree, a buncha high quality left over fasteners, fits anything you wanna put in it, basically every single thing but the kitchen sink in terms of cases is included.Just buy it already lol