DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Fitment on Most Cars, Sedans, and Trucks - Matte Black Powdercoat

I can confirm this will fit a 2025 Subaru Forester Premium trim with no modification to the tailpipe but some inventive installation solutions. The tail pipe on my forester flares out at the end so this will not slip on with the hardware already attached. So I had to hot glue 2 of the flat bolts in place and slide the last bolt in place once I slide this past the flared out edge. Then i was able to thread all the bolts in by rotating the pipe to get to all of them. Centered it and tightened down the bolts. I did not push this all the way back as the mounting hardware would come into contact with the muffler and probably cause a rattle down the line. This will result in this sticking out past the bumper a little from certain angles. Looks a lot better then stock to me.

My wife saw this on a Forester forum and thought it looked better than the very small, recessed, chrome trim on her 2025 Forester Touring. That is the top trim level in the US, I know other countries have different names for the various trim levels. The OEM trim ring Touring tailpipe is held in place by a welded bracket on the short pipe exiting the muffler at the rear of the car. Along with the bracket, the very end of the pipe swells out to a larger diameter to match the inside of the chrome trim piece. The larger diameter doesn't allow the new tip to slide on without removing all the hardware. The welded bracket doesn't allow the tip to slide all the way onto the pipe. Believe me, I know how this sounds as I type it. Cut the bracket off, slid the tip past the larger section and reassembled the hardware. Clamped it down and it looks very nice. Hope the black coating lasts.

Pretty good. Just hope they don’t fall off on the highway. lol.

Sounds great! It looks awesome on my golf. I had a secondary cat and muffler delete done so I purchased this to go over the little straight pipe that the welder put on, I just used the clamps to install it and I love it. It gives the car a nice little deeper rumble than it already had.

Well DC needs to have what size exhaust it will fit on just states will fit most trucks. Didn't fit my Frontier it has a 3 inch exhaust so cant install! Overall good quality exhaust tip, nice finish will use on another vehicle.

First off, let's get this out of the way.... In spite of other reviews I've read, this really isn't going to change your exhaust note any. It's mainly a decorative tip. For that aspect, it looks nice and installs easily enough if you already have a large exhaust pipe coming out of your muffler or cat-back system.I say a large pipe because the small adjustment bolts start to lose a little of their holding ability on smaller pipes. If you use this on a 1.75" OD pipe like I did, it WILL rattle. For bigger pipes, like a 2.25" OD, it should hold better. I ended up swapping this for a tighter fitting tip made by Vibrant Performance.

Highly recommend this item. Was easy to install. Very durable. Have had it in place was it 2 years? No problems. Looks the same as the day it was delivered.

Buen sonido