Antec C7 ARGB, RTX 40 GPU Support, 4 x 120mm ARGB PWM Fans Included, Vertical GPU Cooling, Type-C 10Gbps, Seamless Tempered Glass Front & Side Panels, 360mm Radiator Support, Mid-Tower E-ATX PC Case

I really love this case. It looks beautiful and the fact that it has 2 tempered glass panels is really cool! This is especially important when considering that cases like this are normally $140+. Pros: - Dust filter included! - The bottom dust filter is actually a pull-out tray/dust filter which is super nice! - Power supply shroud is at the top of the case which in my opinion makes the case look neater and less crowded. - Tons of screws included (and cable tie-downs/velcro) so they supply all that you will need. - Graphics card holder is included which in today's day and age where graphics cards are getting heavier this helps ease the stress on the PCI express slot. - Enough room for cable management and there is places along the edges of the case to router cables around for less crowding of cables. - 2 SSD slots in the back and 2 hard drive cages. - Top panel has light-up USB 3.0 slots so if you like that then it's there. - Possibility to have: - Vertically mounted graphics card - 2 radiators/water cooling - The tempered glass door can be taken off which is nice! - The ability to fit E-ATX motherboards - Overall everything looks very nice. Cons: - If you are wanting to mount 3 fans onto the side of the case or do anything special towards the top of the case you will have to remove one if not two of the hard drive cages because there isn't enough space for 3 fans and both drive cages. - Maybe it's just me but having a cutout in the power supply shroud is a downside because at least for me my Seasonic power supply doesn't look that good lol. - There are these cut-outs at the bottom of the case which I assume is to feed wires through but they are just so big that you can see the cables being routed at the bottom/backside of the case. It's just more of a cosmetic thing. - Doesn't come with fans, which I know increases the price of the case but could be a downside for some people. - The front panel, unfortunately, doesn't have combined audio and mic jack. Which could maybe be a problem for some people? - From my understanding, if you want to put 3 fans at the bottom of the case you will have to (temporarily) remove one of the bottom case stands to access the area to screw in a 3rd fan. I only had 6 fans so placing only 2 at the bottom wasn't a problem but for some people, it could be. - No cable shrouds included which is purely just cosmetic/cable management problem but it would be nice to have the ability to cover up some of the cables being seen through a hole put in the case. However, it could increase the price so it's fine. Overall this is a wonderful case, and for the price, it's even better! I would recommend this case to friends (already have) and would personally buy this case again if given the choice!

I used this case in my latest build. In a case you need room for all you components and good air flow to keep everything cool. This case held the largest power supply, A high end motherboard, all the memory I could ever want and a high end graphics card. Everything is running well and is adequately cooled.

Really a fan of this case. It looks great and holds a lot of fans which is a huge help for me. My old case had no room between my 7800 GPU and power supply. This case moves the PSU to the top of the case, no more overheating. I have a total of 7 120mm fans two of which are on my 240 liquid cooler. Everything is running nice and cool. Easy to open up and work on and plenty of room for internal wire management (Forgive my external wire management) If I ever need another one, this is it.

My biggest problem with this case is the lack of cable tie-down points, there's really no excuse for why they shouldn't be there. The only other problem I had is fan comparability with the hard drive trays. To mount three 120mm fans on the side fan mounts, you will have to remove one of the two hard drive bays, because there's just barely not enough clearance. If the bays had been slimmed down just a few mm or the case height extended, this wouldn't have been a problem. As far things I like, the open bottom is at the top of the list. All cases with a windowed side panel should have this layout. Non-blower graphics cards struggle to move hot air away from themselves in the standard case layout because the power supply sits directly below them, obstructing any direct airflow from below. Side panel fans traditionally fixed this problem, but side panel fans are dead, so a new solution is needed. This case delivers that solution. It has the power supply on top, which grants plenty of air to be blown up into the GPU. This hot air does get blown up into the CPU, but for gaming, GPU temps are a lot more of a concern generally. And it's also a lot easier to upgrade a CPU cooler than a GPU cooler. The optimal setup would entail a closed loop CPU cooler with the radiator fans exhausting out the side, fans blowing air up from the bottom into the graphics card, and one fan at the back to exhaust the hot air from the graphics card. With the main functional points addressed, I have to say that this case feels premium. There's relatively little plastic inside the case, and the metal panels have a great sandblasted kind of finish. The tempered glass is super clean-looking compared to acrylic, and the illuminated USB ports add a very classy feel.

great case has great airflow and i love the look

This is probably my favorite case I've used for builds. Plenty of space, easy cable management, very sturdy, and the fan controller had extra connections available so I could get everything else connected to it for the RGB to all be controlled by the case button. Case is a piece of cake to open up and the back side with the swinging interior cage doors with SSD/HDD mounting options was perfect. Wish I could use this case for all my builds.

I needed a little more space on my desk and my O11 Dynamic Evo was eating up that real estate. This case fit the bill and was priced right. Came with four fans and fan controller - I did not use any of them though. Case is very sturdy and looks good. Cable management is tough due to smaller PSU basement. Found a vertical GPU bracket that fit and this thing looks awesome.

Très beau produit, très bien conçu, aucun regret quant à sa qualité et au rendu finale. Idéal pour une configuration de 2025 et mettre en valeur, en toute sobriété, de beaux composants informatiques. Existe également en blanc, j'ai celui en noir.

Hallo, erst mal. Das Case ist hochwertig und praktisch. Verbaut ist ein Asus ROG STIX B650e ATX form und ein ASUS ROG RYUJIN Frist gen 360 mm beides passt ohne Probleme. Auch meine RX 6900 XT mit vertikal Mount Adapter ohne Probleme kein Schneiden oder Biegen. Bin sehr zufrieden mit dem Case

Perfetto, ottimo per assemblare un nuovo pc

Obudowa jest świetna ale ja dostałem ją ze zbitym panelem więc dokladnie sprawdzajcie przesylki jak je dostajecie

メイン機を新規に組む為にチョイス。裏配線スペースが狭くて大変でしたが、コスパ的に充分です。