NearMoon Rain Shower head, High Flow Stainless Steel Square Rainfall ShowerHead, High Pressure Design, Awesome Shower Experience Even At Low Water Flow (6 Inch, Matte Black)

جوده في التصنيع

جيد جدا

Low quality: rust and start leaking in less than 6 months. Do not waste your money

Good quality but little extra expensive.

I received 8”x8” with a small hand shower. 🧐

Has rust all over and leaks all around

جوده عاليه

It's not nearmoon. It's fake and the water pressure is weak.

This showerhead looks nice out of the box. It comes with some extra accessories in the box and the box is well designed. It includes a small spool of Teflon™ tape and 3 extra silicon nozzle (more on these later). Installation is easy as long as you follow the instructions and make sure to put the black rubber washers into the extension pipe connections before you screw the showerhead onto the extension and before you screw the extension onto your shower pipe. To adjust the angle and height, you'll need to loosen up the wing-nuts on both sides of the extension pipe. Only loosen them just enough to be able to adjust the showerhead. If you loosen them too much, as others have mentioned, you'll end up removing them because there's only about 4 turns before the nut runs out of thread on the screw. It's not a big deal, but it can be a little bit frustrating to rethread. IMPORTANT: It's worth repeating: *Make sure to use the black rubber washers!" This will help with 99% of the leaking you might have, and likely accounts for the majority of the reviews that mention leaks. The majority of the negative reviews here can be explained by people not following the instructions. If you leave out the rubber washer *IT WILL LEAK*. You may or may not need the extra step of using the Teflon™ tape, but it's a simple step. Use a 2-3 inch piece of the tape and wrap it clockwise around the threads overlapping a little. Tighten the connection, but don't over-tighten it. Just tighten about a 1/4 turn more with a wrench after hand-tightening. Tightening too much could also cause leaking because too much pressure on the rubber washers could cause them to warp, in turn causing leakage. Using washers in plumbing has always been an issue -- just look at all the faucets that advertise "washerless!" and this is why. Overall, I'd give this showerhead 5-stars except for a QC issue. When I received the showerhead (New, not used), it was missing 5 nozzles. I looked inside the box, but no nozzles, so they were missing when it was packaged. I had the extras that came with the showerhead, but there were only 3. After I used the included nozzles, there were still 2 holes without nozzles (see photo). In case anyone else has the same problem, I was able to use 2 spare erasers from a Pentel® mechanical pencil and they fit very well until I could get some replacements (see photo). They blocked 2 of the holes out of around a hundred (didn't count them all -- I could've if I's wanted, but I didn't want to :D). When I contacted the seller (via their customer support email), they sent me out some replacement nozzles (about 35 total!) which was excellent with regard to customer service. The only downside was having to wait about 8 days for the shipping. Once I took out the temporary erasers and installed the new nozzles, everything was great. The pressure is good, but not too powerful. I didn't use the included pressure screen washer, but I could have if needed. There is also a spare in the included "extras". To sum up, this is a very good quality item with respect to the design and the materials used. Their QC needs some work, but their customer service makes up for it . . . almost. So far, no leaking and no rusting. Our water turns things a rusty orange color after a period of time and other showerheads without removeable nozzles could be tough to clean. With this one, simply removing the nozzles and soaking them in a water-stain remover should restore them to normal. That's one of the good things with the removeable silicon nozzles. I'll rate my experience with the main aspects here on a scale of 1-10 for those who don't want to read the whole review. Ease of installation: 8 of 10 Quality Control: 4 of 10 Design: 8.5 of 10 Materials: 8 of 10 Customer Service: 9 of 10 Overall: 7.5 out of 10 which is a decent 4 out of 5 stars. Recommended.

I was skeptical because of the great price, but it is truly as advertised. Actual stainless steel, solid construction. Easy to install, everything was provided + extras. Had it installed in 5 minutes. The arm gives you a lot of options for angle, tons of room for adjustments. I installed it in a small stall shower as a direct down rainfall shower head. The pressure is AMAZING and there is a lot of water flow. Not joking when they say high pressure. Absolutely no leaks, been installed and using for 2 months. Highly recommend, worth every penny!

Great shower head, decent flow rate and water volume. just wish they also sold a 30cm matte black ceiling shower arm as well... all the matte black shower arms are either short ceiling mounts, or wall mounts (in south africa at least)

The downpour is ahhhhhhhh and it is so cheap especially comparing to any stores. OMG!!

Kalkt leider auch zu aber sonst ok