- 248903 Automotive High Heat Coating Spray Paint Resistance up to 2000°F (1093° C), Flat Black, (340 grams/Can)

Good quality

First of all i got the paint with a broken seal cap, although not a big deal because the paint seemed to be intact and fine Now i have a bike whose exhaust heats a lot and it had to be painted due to scuff marks and scratches , i prepped the surface with some sand paper (400 grit) and cleaned with rubbing alcohol, i sprayed the paint as instructed and tried to bake , the paint bubbled due to high heat but i switched the bike off and let it sit and cleaned the bubbled paint immediately, i let the paint sit overnight and fired up my motorcycle again in the morning, again it bubbled but now from some places , as this was my 1st paint DIY so i am sure that this bubbling is on my part and not on the paint part, i probably made some mistakes in the prepping and spraying of paint , the surface where it was nicely prepped and primed are looking awesome , go for the paint but get the prep done correctly and go for primer before paint , don't buy from here just go to local market and ask a automotive painter to prep and prime the exhaust before you paint

Best ever product. Very good for rusted exhaust pipe and exhaust muffler. Just clean whole exhaust unit and apply one coat first. After 20 minutes apply second coat. Definetly valve for money product.

I followed the instructions on the can carefully, but I don't possess the skill set to sand the bike well, in spite of that, with only 1 layer of coating the colour has stayed for more than 3 months now with absolutely no signs of wearing off. Used it on RE Thunderbird 350 on the silencer, where most people complain of the paint burning off, this one is truly heat resistant, it has not chipped even a little bit. Great purchase

I used this as a base coat on my bike silencer and engine Guard. the coating and spray was amazing.. i had my silencer sanded before the base coat.. it cover almost all scratches.. i had some heavy rust bumps on the curve of the silencer.. it wasnt fully covered.. ya bcoz those r bumps.. soo.. i had some more coats over there before my final black color coat with 3M silencer coat.. If i went for the Black color Rust-Oleum i wouldn't need 3M.. i had other plans for the grey. After all this i still have like half of the can.. it can do Twice the 3M 's job.. spray quality is nearly same as 3M.. if at all it is a little better than 3M. They have even and good thick spray till the end. I tried like almost all Indian brand paints for automotive.. asian paint, cellux 2x, vista.. compare to all this Rust-Oleum is way better but a bit costly. If u have no problem with money go with Rust-Oleum. they are costly, yes.. but it can do more than twice the Vista Auto Care Spray Paint and more than 4 times Cellux 2X..

The clear coat high heat spray is not up to the standard as per their claim for absorption of heat. I hv applied on car engine and silencer this clear heat resistance coat and the result is dangerous bcz engine room and silencer keep warm after 2 hours of car stop and parked . The entire engine and silencer are too much hot so we cannot touch so it is not a perfect heat resistance spray as claimed by seller and fear about high temperatures remain may caused damage to car No solution from company

Not resistance to petrol it dissolves. Otherwise it gives good finishing

A must for Indian made cars. Especially for Maruti, Hyundai, Tata and Mahindra .. The exhaust manifold will be good when the vehicle Is new . After 1000 to 1500kms, the exhaust manifold will turn redish brown which is not a rust. The metal that is made up of is of that kind. Auto Manufacturer companies should use such kind of paints, which gives a new look. The "RUST OLEUM"paint is so good, which can withstand high temperature and the paint does not peel off. A very good and a must product....! Thanks Amazon and RUST OLEUM

I purchased this high heat clear spray specifically to seal my diamond art pieces, and it has worked beautifully. I use it on hotplates that I make for personal use and as gifts, and the finish it provides is exactly what I was hoping for. It goes on evenly with a smooth spray and doesn’t leave behind a cloudy or heavy coating. Once dry, it gives a nice protective layer that helps keep the diamonds in place without dulling their shine. I was especially pleased that it didn’t cause any discoloration or damage to the adhesive or drills. Another thing I appreciate is how durable the finish feels. It holds up well and gives me confidence that the pieces I gift will last and stay looking nice over time. Overall, this has become a reliable part of my crafting process. If you’re looking for a clear sealant that protects without taking away from the sparkle, this is a great option.

We used it on our bbq smoker and the paint came out after few mins Order 20 qty spray out of 4 didnt work. 0 out of 10 product

the product is exactly what I was needing. I was not able to find this anywhere at stores near me. It works as advertised and looks good!

As long as you follow proper baking procedures works great. The color is VERY matte! Be aware. But also nice. Held up well so far after 1 month.

Shipment was on schedule product worked as advertized