Drilax 50 Pack Rotary Tool Cutting Discs for Metal, Double Reinforced Cut Off Wheels with 4 Mandrels, 1-1/4” for 1/8” Rotary Tools, Compatible with Dremel Cutting Discs 426 426B

These are great bits for a Dremel. I used a couple on a light job cutting thin sheet metal. A tip would be to not press too forcefully and let the tool do the work for you. This way will prolong the bit. I think these are universal and will fit most rotary tools. I'll probably use these up over time but they are meant to be disposable over time. These seem to work as good as any other brand and would recommend them to casual people who may own homes or have hobbies that need things cut. Good deal.

I own a Dremel rotary tool and have used these types of discs for all types of odd jobs- they really do come in handy. The OEM ones come in packs of 4-5 and are quite expensive. I was surprised at the value proposition of these offered. 50 pieces for about the same cost as the OEM. I like the quality of these discs as they are comparable to the others I've used, same thickness and cutting speed. I'd feel less disappointed if I were to damage these as this is a 50 pack. The one thing I would have liked to see would be a quick connect to get the discs on and off like some others I've used. The small screw-on base for these Drilax discs is in no way a deal breaker but something to improve on potentially. I also like there are 4 dowels included that are easy to connect to the chuck of the tool.

Works well with my Dremel tool. Well made and cuts good. Only lasts for one job but for the price that's fine.

Got these to save a buck over the Dremel branded wheels. Since they're fiberglass, I didn't expect them to hold up as well as the abrasive resin discs Dremel sells...but the difference was still much bigger than I thought! For softer materials I'm sure these are worthwhile, but when I'm using my dremel with a cutoff wheel it's usually on metal. Even cutting aluminum, these wheels wear out quickly -- cutting steel will eat them up like candy. Actually, they don't even really "cut" steel, they just get it so hot that it melts apart. The part gets hot AF. Once everything gets to a certain magic temperature you can watch the wheel just disappear before your eyes in about 2 seconds. Dremel abrasive get warm too, but the cut is usually over fast enough that the heat buildup isn't bad. Example: I just cut off 8, 1/2" PEX crimp-clamps to reuse the fittings they were on. It took 3 wheels. They do hold together pretty well though. I haven't had any shatter/explode on me like some cheapo cutters do.

Great quality cutting discs, and lots of them! Anyone who uses dremel or other rotary tools knows you can cruise through these cutting discs pretty quickly. This pack is perfect for cutting metal and wood, and they have held up better than most. They fit great and are easy to use!

I guess if you are using them for plastic they would be okay. Maybe even soft metal. But not for mild steel. I use these for cutting mild steel 1/4" and 5/16" round stock. They do work. But compared to original Dremmel, they don't come close performance wise. They cut way slower. And they wear out twice as fast. I figured I'd try them since they are a lot cheaper than Dremmel, and found that - in this case - you get what you pay for. I've only used about a half a dozen of them. But, in the interest of time on job sites, I've gone back to using the original Dremmel ones.

Works as expected for bulk cutting disc's from China

Cut-off wheels work great.

Very good cutting disc great value for money.

They do the job but don't last long

Per le mie esigenze ed il modo in cui li utilizzo vanno bene. Per essere piú comprensibile preciso che li ho utilizzati montati sul mamdrino di una macchina utensile e con il pezzo montato nella morsa della macchina ho fatto i tagli e le lavorazioni necessarie. Ha funzionato tutto bene, li consiglio. Giuseppe

Passen

Not used as yet,but pretty sure they'll do the intended job.Nicely packaged.👍