KeylessOption Keyless Entry Remote Start Flip Car Key Fob Control 4-Button Replacement for 2010 - 2019 Chevrolet Equinox Impala Sonic Trax Buick Encore (OHT01060512, KR55WK500733)

Works like a charm! Great quality and man is this way better than going to someone who will over charge you for 10 seconds of work!

A great cost effective solution. Worked exactly as expected! After the third round in the programming process, it didn't immediately turn the "lock light" off after 10min, but we just waited an additional 10min and then took the key out for 1 min, and it worked, and all buttons work. (Note: Let it run for 10 min after programming to compete process).Also, *tip* if you have the actual key and it's just that the remote and/or motherboard is damaged, you can take the actual key out without taking fob apart (to avoid damaging it). Locate the small circular pin, where the key and fob connect, and use a small screw driver to release the key part and replace. (Look up: Moving GM key to new Fob or Fix broken switchblade key GM key Fob).

We bought this fob for our grand daughter's 2011 Chevy Equinox. It appears identical to the OEM fob in form and function as far as I can tell and we are completely happy with the purchase. Here's what we learned in this process: 1) Many places that cut keys won't do aftermarket fobs unless you buy the fob from them (They don't sell them for anywhere near this cheap, yet they still charge you extra for cutting the key and programming!) 2) We ended up taking ours to a local locksmith shop and they cut the key, programmed the fob, and tested it for less than $30. We were in and out in less than 15 min. 3) Just a note: The locksmith told us that most domestic cars are easy to cut and program, but to be careful on European and luxury cars (especially Mercedes!). Many of them apparently have proprietary programming, which means almost nobody can program the fob except the dealers. I'd consider checking with a locksmith before you buy if there's any question. 4) Since this is for our grand daughter's car, just for security, we've ordered two more. Overall, this was inexpensive and easy. All are working perfectly, and again, we are 100% happy with this purchase.

Great for the price. It works great.

Many buyers like me will plan on swapping the cut part of their key onto the new fob. I had to file down my original key to fit it into this fob. I filed away too much metal, and now my key is a bit loose in the new fob.

I just needed the shell to transfer my key, transponder chip. It was easy to disassemble and reassemble. The flip out for the key isn’t quite as strong as the original but the overall quality and function for the price is great.

Don’t buy it’s a dummy key so you have to use a locksmith. If you can find one that is not real expensive or they don’t have the ability to help you.

Worked perfectly! I took the guts out of my old fob that was missing buttons and put the key and guts in this. Works like a charm!