AntecC8 ARGB, 2X TQR 160mm & 1x TQ 140mm ARGB PWM Fans Included,Dual-Chamber Layout, Type-C, 360mm Radiator Support, Seamless TG Front & Side Panels, RTX 40 Compatible, Full-Tower E-ATX PC Case

The media could not be loaded. I’ve done many cases over the years. Thermaltake. Antec. Lian-Li. NZXT. Coolermaster. I’ve always found myself going back to Antec, as they have excellent layouts and everything you’d want in a case. This C8 is no exception. Lots of fan options, 98% tool-less, little niceties like an included small bin to organize your extra screws. Front panel connector is now a single line instead of all those little connectors you have to read schematics to put in because you can’t remember Intel’s layout when you build a new PC once every few years. Purchased Antec Non-A RBG fans to go with it, since this doesn’t include any. Not a big deal. Lots if space on the backside for SSDs and 3.5” drives if you are still rockin’ those. Panels come off easily and are secured just as fast, and you can rest assured they aren’t going to jiggle around. Motherboard installed easily, lots of airflow and barely audible even with 10 120mm fans. Even pushing it hard during a stress test the fans never spun past 600 RPM. 68F ambient temperature. CPU and Asus AIO keeps the Intel i5-12600k around 32-37c, even under heavy gaming with Starfield at max settings. The video card fans barely even spin up due to the cooling from the bottom intakes. Excellent quality case. Front side and bottom are intakes, rear single 120mm for exhaust, and plenty of room for my 360mm AIO and 3 120mm exhaust fans up top.If you have the space, this is what you want. Again, its MASSIVE. Not Thermaltake Tower 500 massive but still huge in its own right. See video for fan audible levels during idle.

I don't write reviews often but I must because this is such a great case!! It's been serving me so well for 8 months now!I was looking for more intake and better ventilation for my 360mm 38mm rad and I found it here! With the original case the NZXT H710i I was getting high CPU temps, upwards of 82-83°, mostly due to constriction on my rad, despite 40mm being the limit for size on the H710i but we all know now NZXT is mostly garbage. Instructions were clear, came with everything I needed to move my parts over, ample space for the fan controller, GREAT and I mean GREAT cable management avenues, bottom & side intakes is superior than front, fits my RTX 4080 Super nicely, and the case itself looks and feels great!SpecsCPU: AMD 5950xGPU: MSI 4080 Super Suprim XRAM: 48GB on 4 sticksPSU: MSI 1000W 80 PlatinumFans: 3x 140mm bottom intake3x 120mm side intake1x 140mm rear exhaust3x 120mm 3000RPM + high pressure top exhaust (38mm 360 rad)

Exactly as described, stays cool, is quiet, everything was put in and sits perfect :) a lot of room! Built to last, not a speck of dust in it.. looks super cool with colored fans and wires and ram

I moved my system out of a Corsair 4000D for this case because my 6800xt wasn't getting enough air with a 360 radiator in the front of the case. My airflow issues are solved. Build quality is good and assembly was easy. Nice cable management possibilities. Overall, I am very happy with it.Not a fan of the 90 degree wire grommets.

The media could not be loaded. I can't say enough positive things about the new Antec C8 (Constellation Series) Gaming Case. This was the easiest PC build in my 44 yrs building and tinkering on Home Computers - YES I started in 1980 with the TRS-80!...This system case is well thought out and super easy to build out - completely Tool-less internal case access design. And it's beautiful, to boot!Speaking of boots, this case is Rigid - Sturdy - even with the Front, Sides and Top all Off (which all snap on n off easily). It can take an accidental kick or nudge without incident. But be careful, you might get hurt - it weighs in at a hefty 55 lbs fully built out, as seen in the video, above.The internal airflow is well Engineered, and allows for 4 different size fans or coolers in the Top, Side and Bottom! It is literally "The Bomb." I call this case my Blue Bomb.Enjoy!

Great case with plenty of space and features ! My build looks really good in it !

The media could not be loaded. Just being completely real, I’ve never heard of Antec until I searched “Full Tower Case” and this popped up. I originally went with the NZXT H9 Flow for my latest build because I wanted to drastically improve the airflow in my latest build (X670e godlike, 4090 Suprim Liquid X, etc) because my precious NZXT case was getting really really hot with this build.I’m blown away. Not only is this case beautiful to look at, it made cable organization, installation AND air flow of my latest build the EASIEST piece of cake for an E-ATX motherboard build. Cable management was lovely, everything tucks perfectly in the back and for someone with 5 hard drives, everything still fits perfectly.Not only that, but the heat management while using some Noctua premium fans.. ITS COLD, the ventilation on this build is so great.Note: this does NOT come with fans so plan on buying some (which like I said, I bought a bundle of Noctua fans). 5 stars without question. I wish it would’ve at least came with some case screws for fans but I had some extra ones.

Love this case. Easy to build in and looks great. I love the ease of being able to take off the front, side, and back panels for easy access and easy cleaning and cable management. The build quality is top notch.