Trailer Ladder Rack,2 Racks Side Mount Steel Ladder Rack for Trailer 300 Lbs Capacity,with Adjustable Bumper,Rubber Pad,Hook,Elastic Rope,Fit for Open and Enclosed Trailer Side Wall

I needed to store a 40’ ladder (20’ collapsed) in a small building built on a hillside. So I needed a rack that would hold the ladder at a 30° angle. This trailer rack proved to be a good solution with the two rack pieces mounted at a comparable angle. The two rack pieces were strong enough to withstand a small sideways torque as the ladder is pulled in the downhill direction. The rubber cushion on each of the rack pieces also worked to minimize the downhill slide when the ladder was set onto the rack.The overall construction of the rack pieces appeared good with clean welds caps on all ends of the frame material. The only exception was one sharp corner - not a manufacturing flaw, just a joint that could have been designed better. It was also an area to be avoided while mounting but did not interfere in the loading and unloading of the ladder.I had to smile when I initially opened the box because the kit is so complete that it even includes gloves to wear for installation and tie-down bungies. It seems somebody tried to think of the customer when assembling this product.

The bicycle carrier we have for our two heavy ebikes is rated for RV use so the carrier itself weighs about 55 lbs. The carrier also curves up at both ends so typical garage hooks aren’t deep enough to accommodate the shape. The carrier was stored on the floor because it wasn't stable leaning up against a wall and typical hooks weren’t deep enough to handle the shape and weight in order to hang up. The Cozsir ladder racks were able to handle the weight and the hooks are deep enough to handle the curved shape so now I can hang the carrier when not in use.The hooks aren’t just die cast, the corners and joints are welded and then cleaned up before being coated so the finished look is very smooth. The rubber pads keep the carrier from getting scratched and works with the O hooks to keep the carrier from sliding around when the side garage door occasionally slams from wind.The installation kit included the hardware, drilling hole templates and bungee cords to make the job easy. I’m very happy to have found an easy solution for storing my carrier when not in use and to have reclaimed floor space.

They worked very good but after 6 months one of them broke at the weld. Which doesn’t make sense they’re on my trailer that I only use one or twice a month it’s just been sitting in my yard. Nothing happened that could have caused it to break. I rigged it back together for now but I definitely need to replace it.

I'm setting up a small enclosed trailer for a handyman. This is exactly what I wanted. It does require drilling holes in the side of the trailer but it's worth it. This is more than just a ladder rack. It can also be used to haul small amounts of lumber.The rack is well built. The only thing I would upgrade would be to add the same rubber the ladder rests on to the sides. The rack is pretty easy to install but it does require two people to tighten the bolts. It includes everything you will need other than something to seal the bolt holes if desired. There's even some bungee cords to keep the ladder from bouncing around. There's two eye bolts so you have an easy place to hook the cords up to. They also work well for a ratchet strap for securing a few 2x4s.

This ladder rack is solid made of steel and looks very sturdy. I am really impressed with the quality. Have not installed yet but it came with all the equipment and screws needed for installation. Will update on its performance when I install.

Put these on the side of my shed using some 2.5" lag bolts. Install was simple and the racks were able to hold my 32' fiberglass extension ladder with no issues. The racks are really only deep enough to hold one wide ladder, but if you have thin aluminum ladders, you might get two of those to fit. I stacked a bunch of lumber on top and the racks held the weight with no problem. Will probably start storing my long pruning pole saws and other tools on the racks.

put these on the side of my trailer and they are nice sturdy steel and provides a ton of benefits for easy hauling of various materials

I got these so I could hang my ladders off the side of my shed. Though a bit of overkill as they are made with both shock absorption and a way to secure them for mounting on a trailer, for my application they were the best solution.I really like that everything comes in the package, including templates you simply tape to the surface for drilling holes, bungies for securing the ladders, and all the mounting hardware. If it weren't raining I could have these hung in a matter of minutes.The powder coated material should stand up the weather for my application or if going down the road.