EZARC Japanese Teeth Reciprocating Saw Blade 15 Inch, Arc Edge Wood Pruning Saw Blades 6TPI for Tree Trimming, Wood Cutting, 3 Pieces

Sharp long and cuts smooth great for pruning

These curved pruning blades have gotten the job done and stayed sharp while cutting out stumps below grade. For the one star reviews who had the attachment point break off next time try their customer service which is excellent

This blade style and length is perfect for my intended use. I make cedar log bird houses and these blades give me an accurate, pretty smooth cut very quickly. The aggressive tooth pattern zips through the 6 to 12 inch cedar logs with just the weight of the saw pushing down. I'm sure these blades would have many uses with the same results. I have made at least 25 cuts with the same first blade with unnoticeable wear. Good product. Good value.

Very sharpTurn reciprocating saw into tree eater!Good value!!

These blades work much better than “straight” reciprocating saw blades. The ads are accurate.

Although the blade is sharp and nicely made a comparably priced carbide blade last much longer. I burn through three blades within a couple of hours of cutting. With the Diablo carbide blade, I only went through one at six dollars each.

I like these 15 inch and 12 inch EZARC Reciprocating Saw Blades.I have a monster Avocado tree that grows like crazy and needs to be cut back every 4 or 5 tears to keep if off the power lines ,and from smashing my shed apart with falling Avocados.In the past I've used my Husq-Chain saw, but I would spend more time sharpening the teeth on the chain than actually cutting.So I tried these Sawz-all blades. What an improvement !I breezed right through the biggest limbs with the 15 in, abd use the 12 inch for smaller stuff like a Jasmine tree.The teeth remained sharp through the entire process.While straight blades are better for close in cutting, these curved designed ones are faster through thick stuff do to the arch of the cut, so there's little rocking back and forth to free the blade.I used my trusted D-Brand Saw, and made sure to tighten the retainer bolt on the blade clamp really tight as if there's play in the blade clamp the blade can break off, especially on Oak.

These work great with my craftsman v20 (CMCS300B). However, do to the teeth being very tall and aggressive, they do not fit into my older 19.2v model craftsman. They work so great, I'm leaving 5 stars anyway.