JOUNJIP Deluxe Plastic Welding Kit - UL Certified, 17 Pieces Aluminum Repair Tape, Sandpaper, 2 Triangle Soldering Iron Tips, 2 Soldering Iron Starter Tips, 4 Mesh

Tool works fantastic. Surprisingly plastic doesn't stick to heating end. Easy to use when folowing instructions. Use light pressure, let it slowly melt in. For those that managed to break or bend the tool. Let the tool do the work. Let it warm up, it doesn't get to proper operating temperature instantly once plugged in. and expect it to be ready to use, give it time.

This welding kit is set up real well for plastic welding. The welder gets very hot and makes welding plastic much easier with better flow of the rods. I repaired a large black trash barrel (one with flip lid for trucks to raise up and flip over to deposit trash). My barrel ended up with about a 12 inch split of the lid from the back corner heading towards the middle. Needed to repair this crack or it was just going to get worse and these barrels aren't cheap. I used the silver tape, to seal the top side and then used the black polyplaz rods with the included wire mesh and larger triangle tip to weld and seal the underside. On the top side, I created a groove with my dremel tool along the crack and then used the boot tip with a PP black rod to fill in the groove and flattened the the plastic to create a relatively flat surface. I then used an orbital sander just to smooth out and to practice. It's ready for a quick paint (not needed but once again just to humor myself) and the trash barrel looks so much better and the lid is now rigid and feels like there never was a crack. With regards to customer service: When I got the box, I noticed it was missing the smaller triangle tip and I got a hold of customer service quickly. Jon was so helpful and said he would get a welding tip right out. He did and had the tracking number for me that day. If you are price comparing, I think you will see that this kit is much better quality and the items included deliver better bang for the buck. I added some photos to show work in progress. I will do some final touches to smooth out and blend some paint in (really not needed for this trash barrel but just to use some more tools! Pictures show the wire mesh on the rough underside but on the top you can blend in with the boot iron and fill the crack with the PP rod. Did some rough and medium sanding and it looks like a used trash barrel and is as strong as when it was new.

Muy satisfecho con la compra cumplió mi espectativa, al reparar mi facial de mi auto quedó genial y los accesorios que trae son geniales

Excellent kit, been using it for over 2 years now and it gets the job done everytime and this was my first time doing plastic weld. The tip heats up in about 4 minutes and is ready to use but can get really hot and i have to be careful not to melt other plastic. The different heads are practical and allows or getting into corners

The Jounjip welder worked so much better than JB Weld. My wife dropped the cordless blower which cracked the end near the motor. I applied a thick coating of JB Weld original on the inside and out and then let it cure for two days-popped apart when placed back on the blower. Jounjip with wire mesh and other areas with just the weld stick held up perfectly. Temperature was 500+ degrees and easily melted the HTPE ABS and the plastic fill rod. Glad I got it during the Black Friday sale.