Cuztom Tuning Type-R 3D Wavy JDM Mug Style Window Visor Rain Guard Deflector Compatible with 2016-2021 Honda Civic FK4 FK7 FK8 5DR Hatchback LX EX Touring Sport

So I bought this and installed this the other day. I was at first hesitant after reading all the reviews about not fitting correctly, hits the visor when rolling the windows up and down, and even the adhesion not being strong enough. But I loved the look and bought it anyways.When I received it, I first dry fitted it and the passenger rear visor didn’t line up perfectly. I it wasn’t too bad. I also had my wife roll the windows up and down while I held it in place. It did knick the visor on the front passenger side but after adjusting it higher it cleared it and didn’t hit the visor. I also bought 3M Double sided tape from my local auto store and was planning on replacing the tape that was there (from reviews). But as I tried to remove the stock tape, it was really sticky. I even compared the tape on the visor and the 3M I bought as it was just as sticky or even stickier. So I decided not to mess with removing the original tape. I did use a hot gun to heat up the tape to make sure it would stick well. Of course clean the trim on the car really well so no dirt or debris is there. If you don’t have a heat gun, maybe install it on a hot day to warm up the adhesive.In all I was satisfied with this product and it turned out well. I’m able to roll down the windows with no issues. Just make sure to dry fit it and roll the windows up and down to know where to attach it. I love the look!! Maybe I will update in a few months to see how it holds up.

It's flexible, durable, quite strong and well designed, black gloss as advertised. But I warn you: Replace tape that comes with it with 3M grade automotive mounting tape or it won't hold; I got mine from auto zone. Other than crappy tape, it's a perfect fit for my 10th gen civic hatchback. Number one thing you cannot skip is get the surface clean before attaching. Give some time to put on and adjust as you go. When you do this aim higher so window doesn't hit it when you roll up or down your windows. Also: use something as a heat gun to warm the tape, it helps with bonding it to the car. I brought out my hair drier and an extension cord because it works and won't harm paint. 3M tape is removable with dental floss and pulling at an angle if for whatever reason you decide to remove it later. Left review to make this straight forward as possible.

It's a bit off but it is very stylish on my civic.

These are great! They are $40 so not the best but not the worse.Yes, they are navy blue. they aren’t cut exactly, but if you figure out placement before sticking them, it covered the silver part of the window frame. I used the adhesive that it came with and it has survived three different storms in Los Angeles. I put them on a cold cloud day and they stuck on really well. I love them. I love the line design which goes really well with the civic hatchback.It’s $40, get it, you won’t regret it

I don’t usually leave reviews but I did due to a safety concern. I want to start by saying that I have had a set of rain guards on every vehicle that I have ever owned. I currently have a set of AWS rain guards on my wife’s minivan, that I installed almost 4 years ago and they are just as secure as the day I installed them. I usually purchase AWS or Vent Visor brands but decided to give these a try. When I received them, I noticed that they were noticeably thinner (the gauge of the plastic) than other manufacturers and the mounting tape was not 3M. I should have sent them back at that point, but I was excited to get them on my new car. Again, I have installed dozens of sets of visors from other manufacturers and cleaned and prepped the mounting surface as I have on every other installation (these instructions were no different). It took less that a week, and the rear passenger visor came loose and almost flew off going down the highway. I had to pull over on the side of the highway and remove it. Needless to say that I promptly removed the remaining 3 visors when I got home. I contacted the seller and asked to send them back for a refund. Of course I was informed that since I had installed them and that they could not give me a refund. Then they proceeded to give me a lengthy explanation as to all of the reasons why they were installed wrong. I would highly recommend purchasing a higher quality set of visors. If you do decide that these are the rain guards that you want, I would definitely suggest removing the mounting tape that comes on them and replace with 3M mounting tape.

Seems to be decent quality and look great. Had issues with the front windows hitting the bottom edge when rolling back up. Tried adjusting and was able to get the passenger side to work without modification. Had to trim off the bottom of the driver's side. Still satisfied given the price.

Went in easy need to do a little clearancing on ds as I think I put it to close to the window and it hits when it’s cooled off. Good so far might have an issue later with how thin it is but great right now.

Some of the sticky tape seems sus so I applied more left over tape that I had from some other stick and peel products I purchased. You want to aim high to make sure that it doesn’t hit the windows when you roll them up and down like I read from other reviews. I like it. It looks good to me. It doesn’t go along the entirety of the window lining so if you have silver lining like my car does, some of that will show near the review mirrors but maybe it’s supposed to be like that idk.