Triton Cottos 6061 T6 Aluminum Flashlight Ring for Most 1" Flashlights with Detachable Pocket Clip, Flashlight Retention Ring

Very well made. Fits typical 1" flashlights. I thought the finger loop was a bit big at first but it works well when wearing gloves.

Good quality but your light must be 1". No leeway

Fits perfectly on a streamlight protac hl-x. I like the all metal structure, and finger loop size/design. The ability to unbolt the clip and customize which way it mounts is great. This is a solid design. Im a mechanic and clipping my light in a pocket is quick and easy to pull, with gloves, grease, or bare hands. Definitely recommend.

Bought for my Klein light/laser and was too big. Used some electric tape to get a snug fit. The finger loop is very big so it isn’t ideal to have in pocket and also grabs everything if put it on vest or outside of pocket. Aside that, It is very sturdy and durable

I'm not using this for shooting, I just wanted my tailswitch lights to have more grip options. I really like the concept here, and how it allows for different mounting positions (in theory) along the battery tube to get the balance and grip you're looking for. I can dangle my Convoy S21G from my index finger and it has an ideal downward tilt for hiking/dog walking. Anything I need to do with the light I can do one-handed. And, unlike Thyrm, they got the clip position right! As in, it should be at a right angle to the ring, not directly across from it. The whole package is awesome. BUT: it's actually too small for this light. I really wish they'd make a range of sizes, or else redesign the clamp so it can accommodate a wider range of tube diameters. For this to go on easily and clamp properly, your light has to be EXACTLY 1" in diameter. My S21G is 1.022" (22 THOUSANDTHS too big!) and mounting this thing required that I sand down the battery tube. Even so, the clamp doesn't close, and if I tighten the screws too much, it distorts the tube's roundness and prevents the battery from going in. So I had to barely tighten the screws and use threadlocker to make sure they stay put. Tried it on a Convoy S2+ and it's too big to fit properly. Bummer. I really like this product but it needs better fitting options.

Absolutely love this product. Use it on my Fenix TK21r work flashlight. I’m 6’2 and have long fingers and it fits perfectly. Allows you different ways to hold light and really works for my needs. Ordering an additional for my edc. Finger loop seemed large at first and took some getting used to. High grade materials used, lightweight but strong and sturdy, highly recommend!

Fits Nitecore P20ix perfectly. Good quality, well machined, good grip angle. Improves handling and retention of flashlight

This thing is sweet! Fits well on my Sofirn SP35. It fits very snugly with the tension screws. The clip is beefy and rides well in my front hip pocket. I was able to set it where I can control the tail cap and setting buttons without changing my grip with my non dominant hand. I'm looking for one that will fit my inexpensive wowtac A1 lights that I have by every door in my house (we lose power often in winter where I live) and my TX11 that I use at work. I will have to mic those out but based on the fit they have a 7/8" diameter shaft. This product is not adjustable to that size shaft. I'm going to try to epoxy some magnets to the outside ring for what I hope will make a hands free portable welding light.

olightのwarrior3sにつけました。少々タイトですが、一応無加工で装着可能です。装着時には擦れてライトの塗装が多少剥げます。warrior3sに使えるリングを探していて、少しくらいの傷なら気にしないという人にはおすすめできます。 添付した写真のリングにはクリップがついていませんが、握ったときに邪魔だったので外しました。商品にはクリップも付属しています。 他には小さなレンチも付属しますので、ライトさえ手元にあればすぐに取り付け可能です。

挟み込んで締め付けるタイプになっており、かなりの汎用性があります。手持ちのものには手を加える事なく付けることができました。 仕上げや強度的にも満足。thyrmがつけれないライトにはオススメです。 デメリットとしては、リング部分が大きくて形が変わっているためにテールスイッチが押しにくい構えがあります。スタイル変更する場合はthyrmの方が使用感は良いです。操作性でマイナス1。 クリップは艶ありで目立ってしまいますが、抜き差ししやすく、左右面のどちらにも付けることができて便利。 クリップ艶なし、リング部分がthyrmのような形になると最高だなぁと思います。