Easycargo 20pcs 9mm Small mini Heatsink Kit 9x9x5mm + 3M 8810 Thermal Conductive Adhesive Tape, mini Cooler Aluminum Heat Sink for Cooling VRM GPU Stepper Driver MOSFET VRam Regulators (9mmx9mmx5mm)

They worked great to cool some MCUs for my 3D Printer, but they'd also work equally as well on something like a Raspberry Pi or other SBC. Super easy to install, just peel and stick.

I was always concerned with how hot the back of my home theater's subwoofer got when turned on. Apparently, it's normal and not a problem, but I still don't like that it was almost too hot to touch. That can't be good for the thing. So I bought these little heat sinks and just randomly stuck them to part that gets hot. It made a drastic difference. It still gets warm... but not hot. They worked incredibly well to the point I'm going to order a ton of these things and put them on every heat producing electronic that I own. Especially my Ebike chargers. Those get super hot. If you want an inexpensive way to drop the heat coming off your electronics, try these out. They actually work really well

These arrived quickly and work great. I'm using them on a larger device to pull heat from an image processing chip and they get the job done well. I like these because they are tiny so I can place them in positions that would be awkward for larger heat sinks, and it saves me having to cut out custom parts.

Came on time and as described, worked very well except some didn't adhere and fell off after awhile while others adhered well... though it was a small number that fell off so at the end of the day, replaced them and all is well.

Super easy to use for budget motherboard heatsinks. Slightly smaller then a penny

Perfect for the small vrm on my 1080ti with kraken g10 . I've had them sticking while hanging upside down now for around 5 months... Moved my card between two cases since then and haven't had a single one fall off. They're small and finicky to work with but they do work fine.

A bit small for VRAM but you can stack two of them side by side to about cover it. These are definitely for VRMs. One thing to note: these are miserable for sticking to the chips. The pre-attached thermal tape does not adhere well at all to a chip die surface. I ended up using the existing thermal tape that was on my VRAM already and just stuck these to that. So far it's been fine, but they still could come off easily. Fortunately the tape I had there was already sticky. On the other hand, my card has a midplate that covers the VRMs and I just kind of stuck these on top of that for a bit more heat dispersion because.... well, I had them so why not? And it turns out they stick like glue against a metal surface. They locked down to the midplate like they were welded to it. Overall these are okay. They definitely helped my temps a bit. But I'd recommend replacing the thin 2-sided thermal tape included with something actually useful.

The heat sinks are great and just the right size. Transfer tape appears to be holding good, will see on the long run how it holds up after it has been in operation for a while, but so far, so good.

weak glue on the pads.. so i had to purchase thermal glue. the size 9 mm x 9 mm is to small for my RTX 2070. it covers maybe 65%

Die Kühler leiten die Wärme super ab und die Qualität ist super. Was ich aber bemängeln muss ich die Verpackung. Die Kühler hätte man auch in eine kleinere Verpackung verpacken können.(Reine Papier Verschwendung)

マザーボードのチップに貼りました。今のところ良い感じです。

Realmente son mini disipadores, de buen tamaño para placas pequeñas, con buen acabado y la cinta adhesiva se pega fuerte por lo que no hay posibilidad de que se desprenda en un uso normal.

..... no. Già il dissipatore é davvero piccolo e ha meno di 1cm quadrato di superficie utile, se poi la colla (o meglio l'adesivo) é incerto sono guai. Nonostante la pulizia con alcool dei chip la tenuta é scarsa e uno é caduto dopo pochi minuti. Vediamo gli altri ma il caldo/freddo non aiuta certo. Vedremo più avanti