MZS Motorcycle Bar End Mirrors Rear View Side Mirror Black 7/8 Compatible with GROM MSX125 CB500F Z125 Z750 Z900 MT-03 MT-07 FZ-07 MT-09 FZ-09 MT-10 FZ-10 FZ6 FZ8 FZ6R SV650 SV1000 GSXR 600 750 1000

Compared to the CRG mirrors that are a $100 a piece these are a steal. They do feel a bit cheap and previous reviewers mentioned them breaking but I think you just need to be careful when installing them and or adjusting them while on the bike and you will be fine. I installed these on my 18 MT09 using the stock bar ends. To do this, use a schedule 40 1/2'' pvc pipe and make spacers that are a bit wider than the mirror mount. This will allow for clearance on the throttle side so the throttle doesn't stick and allows you to use the stock weighted bar end which was a priority for me. Just screw the pvc spacer onto the bar end and put on the mirror. I also recommend filing down the clamp connections so the two surfaces meet better and can clamp down all the way. I've had them on for a few days now and I like them so far. Only issue is that there is a small blemish in one of the mirrors but it is minor.

I ordered a set of NEW MZS Motorcycle Bar End Mirrors for my 2021 MT10. I received them this afternoon and was impressed with the overall packaging. Upon opening the package I found several things that are preventing me from installing these mirrors. First and foremost, I found the mirror clamp to the bar end adapters has no threaded insert. I am unable to secure the mirrors to the bar end adapters. Second, the bar end adapters are scared like they had been installed (and possibly over torqued) before. I understand Amazon has the option to purchase used items. This is not one of those purchases. The mirrors look great and appear to be scratch-free but the mounting hardware has major issues.

There are great mirrors and especially for the price...and after a 30 minute drive to test them i'm giving my opinion...let's start with the bad part...the only bad thing about these mirrors is the image is seems to have a wobble in them...I noticed when I was in my garage trying to align them the perfectly straight lights on my garage door looked to have a slight wobble when looking in the mirror...it wasn't a perfect curve like a convex mirror and the bike wasn't on to vibrate...but I guess if your not looking at perfect straight lines then you may not notice...also the I don't like when companies send you items that are all black but send bright silver colored screws...the screws should be black so they don't stick out so much...now compared to stock mirrors you lose view space but also gain view space...I know it sounds confusing but i'll explain...with the bar end mirrors they show about 15% less of view compared to stock mirrors...I can still see cars around me...so it's no problem and you'll be safe...you just have to make sure you adjust your mirrors to your riding position...so I suggest taking the allen key with you and drive a mile or two and readjust when needed because just sitting on a bike you tend yo be more upright and not in your riding position...but here is how you gain view space...by losing those stock mirrors that stand up on your bike...once they are gone you realize how much in the way they were...I don't see why other companies get away with selling 1 mirror at $100...these work great...I also dont know how good the bar ends that come with the mirror work...I had a pair that I purchased separately that I put on...

The mirrors work great, have my left side one on, and I love it, but when installing the right side, the hinge snapped. The company quickly reached out to me and sent me a brand new hinge. Very great product and a very great company with excellent customer service. Will buy from again.

The product looks great on my 2019 MT-07 but the main issue for me was that my left side mirror is wobbly. Tried to tighten everything around it all the Allen key holes and nothing to fix it. It is installed properly, the base is in there nice and tight and perfect but the actual mirror its self is shaking and wobbling obviously showing that its loose. My right side is perfect though. Just need a little bit more QA. Wondered if they would send just one mirror to help me out.

These mirrors look excellent compared to the stock mirrors that come on the z900. IMO it makes the bike look much cleaner as a naked bike should. A few notes, the stock bar-ends on my bike were cemented in place with thread locker - I nearly stripped the bolt head trying to muscle the left side out. That said, what worked for me is placing an allen wrench in the bolt head and heating the allen wrench with a heat gun near where the allen wrench bends but away from the stock bar-end - this allows for heat transfer through the bolt without having to place the heat directly on your bar-ends which loosens the thread locker. Once it was sufficiently heated, I was able to get the bolt to turn little-by-little until it came out. Also of note, when I installed on my bike the clutch lever would not clear the mirror when fully pulled in - I tried setting the mirror at maximum up deviation but it was still too low with the tolerances between the clutch lever and the bar end mirror base. I ended up buying Rhinomoto bar ends and they are EXCELLENT (but not cheap!)! You might also consider going with shorty levers from MZS (if that your style) to avoid this issue - if you plan to mount below your handlebars this may not be an issue. Overall very happy with the quality of the mirrors - cannot comment on the longevity of the item yet as they have only been on a short time but at 1/4 the price of others it's worth a try!

I bought this as an alternative for the stock mirror. I was going for more of the Café racer look, also the stock mirrors did not reflect everything behind me as I have very broad shoulders. Ok back to what happened on install. I pulled out and examined all the parts. The part that clamps to the handle bar was a bit sketchy. It opened up as a hinge to wrap around the end of the handle bar. The hinge was very loose and flimsy. I attached it and started to tighten it down with the supplied Allen wrenches. When it was tight, it still had movement in the hinge and became loose very quickly. I tightened it even more. Again it came loose and the hinge wiggled. I tightened it one last time and I heard something brake. That was it. The hinge had broke. The mirrors are now trash. A better design would to have had 2 machine screws to clamp down to the handle bar. I do NOT suggest this product untill a fix from the manufacturer can be made. The seller was very quick in shipping this to me. This has nothing to do with the shipper, I will purchase from them in the future.

As with most motorcycle accessories, you get what you pay for - to a point. These are essentially Chinese knockoffs of CRG. My brother has the CRGs, and yes, they are of the highest quality. They better be - 1 pair plus the adapters that are sold separately will run you $230!! These are identical in terms of form and function and include the adapters for 90% less! As other reviews have mentioned, there can be some quality issues, but the customer service is excellent. The first pair I ordered was stripped out and would not clamp. I initiated the return and was given the option of an immediate replacement - no questions asked. I received them in 48 hours, free shipping. Functionally they are fantastic. They are stable at speed, no vibration whatsoever. The view they provide is excellent both of what is behind you and in your blind spot. Elbows/shoulders in the field of view are no longer an issue. As a bonus, they look great as well. For anyone who has been considering the CRGs, but hesitated due to $$$, buy these now. 👍👍👍

I fitted these mirrors but when I tried to adjust the mirror position one of the small allen key bolt heads in the back of the mirror (there are two per mirror} just rounded off. I used the allen key tools supplied which are very poor quality. Also on one of the mirrors the top cut edge is quite rough, not the best quality. I have also sent two emails to [email protected] with my concerns but haven't received a reply. I wouldn't buy again from this supplier.

Worst experience with this product

見た目は予想通りでかっこいい！ でもやはり作りが雑。左右2個セットのひとつは良かったのですが、もうひとつがダメ。 バーエンドアダプターに取り付ける部分が開かない。慎重にこじって取り付ける事が出来たので良かったのですが、ミラーの取り付け部がユルユル。 恐らくスピードを上げると風圧で動くと思います。 見た目はかっこいいのですが、残念。。。 追記 ミラーとアームの取り付け部を増し締めしたらしっかり止まりました。 星ひとつ足して4。 つくづく作りが洗い所が残念ですが、この価格でコレならまあ納得。 とりあえず試してみたい、って人にはおすすめできます。

グロム（JC92）で使用しました。 バーエンドを外し（これが最難関でした）、適当なワッシャーを噛ませて商品付属のバーエンドを取り付ければ、ミラーを取り付けアクセルスロットを回しても当たらないようになります。 上側に付ければ確かに手には当たりますが、それも角度次第かなと思います。手が大きい方は分かりませんがね。

上向きに取り付けるとグローブを装着している場合手に当たり運転に支障があります。 下向きに付けるとハンドルを切った際に太ももに当たり運転に支障があります。 できることなら返品したい