KIBO Robot Lawn Mower Garage - Robotic Lawnmower Shelter Roof - Universal - XL 103 x 77x 44cm - House with Solid PC and Cleaning Brush

Ordered this garage for my new Parkside robot. Building it was easy enough, though I agree that the instructions could do with some updating, both in German and English (I speak both). The strips aren't fully made to measure and the ones on the shorter ends needed cutting. Which is fine, but the manual was a little misleading here. Same with the aluminium ends where it's not straightforward to tell. However, when you look at the side pieces it'll be quite easy to tell :)Very happy with the sturdiness of it as well. The feet are made of metal, the side parts of plastic and the cover is plexiglass. Looks great and feels sturdy. Had a rain shower yesterday and kept my lawn mower dry :) would recommend!

Would have given it a 5 but didn't see that it had to be constructed in the details. Also one needs 2 X 17mm spanners to complete. Luckily I have same. Not too difficult to build if you follow the instructions and the finished article it neat and robust

Easy to assembly, covers robot mower fully , good buy for price... put privacy film on to protect from sun

We previously used an old dog kennel for our 315X, which evenutally rotted away and sometimes interfered with the return of the mower to its station due to the sides. This canopy resolves that issue as it leaves the sides clear, but provides a curved top which acts as a canopy to cover the mower. It is plenty large enough to provide shelter from rain. The materials seem good quality and it was relatively easy to assemble. The canopy is large and flexible and I was a bit worried it would catch the wind, but so far all seems well and it is anchored with very long nails. Overall I am happy with this shelter and would recommend it.

Fits perfectly, works great with my Mamotion Luba awd2.Lovely thank you postcard included also.

- Review for KIBO Robot Lawn Mower Garage - Robotic Lawnmower Shelter Roof - Universal - XL 103 x 77x 44cm - Robotic Lawnmower House with Solid PC including Lawnmower Cleaning Brush || Price: £79.99 (at time of ordering) -A robotic mower garage is the type of product you'd never consider needed to exist, until you get the mower and realise it is an essential additional purchase to protect your investment.This is a reasonable price compared to many others, and the finished product is sturdy and robust. It arrives in a ginormous flat box - larger than I expected, and while a little overwhelming at first it is actually very easy to put together. You want to make sure you have a large flat space to do this. The most time consuming part is actually sticking the black foam protective strips around the edges (make sure to peel off the protective screens first).From there you just slide the metal strips over each end, lay a corner piece on the floor and slide one edge in before putting the second corner on the top. Once these are screwed in, you flip it over and attach the heavy duty ground brackets to each corner. All screws and fittings are provided, including ground fixing pins, which are a good 20-25cm long to be hammered into the ground.I am impressed with the simple design, made of high quality and durable materials. It's a decent size - I can't imagine many robotic mowers being too big for it, and the curved design offers excellent protection from the elements. The cats are also very pleased with their new sunbathing platform... Highly recommended.

Many people have gone into a lot of detail about this item. The only thing that I was surprised about is that from the 4 bracket pieces only the 2 that nail to the ground (with exceptionally long nails) are metal. The other 2 are plastic. Instructions could definitely be improved on. I found doing the whole job on the kitchen table the best option. Basically, stick the foam pads around the edges on both size. It says they are cut to fit but I needed to trip a couple. Then attach the aluminium ends. Note that the rounded end will be at the front. There is no mention of this. Now attach the brackets by sliding on. Now use the 4 small screws into the holes in each corner. Finally attach the metal brackets. They will only go on one way. Also not mentioned is the fact that the bolts come in 2 sizes. You have to use the shorter bolts at the bottom (or top if it is upside down on a table) as they will not fit in the other position. That's it. It tooke on my own about 10 minutes trying to understand the instructions then about 20 minutes to put together.Like I say it feels strong. It is clear so I can only assume that the perspex cover is UV resistant. I've added plenty of photos to help explain. Finally, it does fit around my Segway i108 if anyone else is looking.

I have received some pretty niche products from Amazon Vine in my time, but this beats the lot! I had to rely on The Resident Warlock to put it together for me and he reports that the instructions were not very good. Nevertheless, he soldiered on and the result looks very smart indeed. Just as well, really, as I'm hoping to use it as a suntrap for the watercress I grow in my garden...