3.5mm Male Audio Stereo Jack to 3 RCA Female AV Camcorder Adapter Connector Extension Cable 90 Degree Angled 4 Pole 5-Feet

In installed the HTTX cable between a surround sound amplifier and a new Sony XBR65X900F. The surround system provides video that can be watched on the TV to set up sound. I had to get this cable because the Sony does not have a video input other than the 4 segmented 3.5mm plug available on this cable. The RCA video and audio ends plugged into the back of my amplifier. The TV then correctly displayed the amplifier menu when selected the video input of the TV.Functionally the cable is perfect. As far as quality of build, it appears to be a very high quality cable assembly with good strain relief on the connectors and gold contacts on the 3.5mm plug and the RCA connector. So all in all Im a very satisfied customer.

HTTX 3.5mm Male Audio Stereo Jack to 3 RCA Female AV Camcorder Adapter Connector Extensiongreat quality cable and connectors .

I was very pleased with audio video cables these are the second ones I ordered the first were supposed to work with my Sony DCR -TVR 320 they did not work they came from another supplier I was not very happy this set of audio video cables I got from You worked very good on my Sony camcorder so I was finally able to watch my underwater videos by hooking my video camera to my tv. your company was a liver safer these cables were hard to find they do make the camera any more. I want to thank you very much.

I would have given this 5 stars, but it took me a few minutes to figure out that the yellow and red cables were wired backwards. Yellow is always video, and red is always right audio. (White is always left audio). But whoever put this together must have put the yellow end on the right audio cable and the red end on the video cable.This may have just been an isolated occurrence. But if you have the same problem, plug the yellow cable into the red port and the red cable in to the yellow port.After that, the video and audio are working fine with very little noise. The last wire from a different manufacturer had a lot of noise in the audio. So these must be shielded better.

Nice and fast

Used this on a CCTV for a Raspberry Pi 3B. However, its signal orientation is backwards for the Pi RLV -> VLR. Make sure to do the following:1) Add/change your config.txt to the following:# Enable DRM VC4 V3D driverdtoverlay=vc4-kms-v3d,composite=1sdtv_mode=0sdtv_aspect=1enable_tvout=12) Use the RED cable to your tv on the raspberry pi. Normally, its the yellow but this composite is backwards.

Bought this cable to connect my Raspberry Pi to my Android 8.0 head unit in my car. After plugging everything in I had no video and some dostorted sounds for audio. I flipped the RCA cables around a couple times and found the the video signal was going through one of he audio jacks and that side audio was coming through the video signal.

Cable works great on an older JVC Camera as outputs. Addendum: a composite input does NOT carry 4K signal. You would need an HDI or HD/SDI connection for 4K! Yes it will look good on your monitor but it is indeed pixelated and I know as I’m a Professional Video Engineer and director. 800x600 is composite and component however you can use a transcoded to turn it into a 4K signal and come out HD/SDI into the monitor and they do have some with HDMI outputs however the input will still be RCA!