Furniture Dolly 5 Wheels Heavy Duty,Large Size Carbon Steel Panel Furniture Movers,Furniture Lifter with 5 360° Rotatable Rubber Universal Wheels,Maximum Load 1700KG/3747LBS

These dollies are excellent! I have a couple safes that each weighs much more than 1100 lbs., and I was able to move them around my warehouse all by myself, without any issues. I had a few occasions of the dollies turning on me a little, but never enough to where I felt out of control. I had to move them through a huge warehouse from one end to the other, and no concerns at all. I never even tried to use the little lifting lever that came with it, because there is no way it could have lifted even a corner of those safes. Better to be use for lighter stuff.

Muy bien

They are a great quality and very durable but didn't work for my needs. These require you to lift your item up so very high to get them onto the wheels. I heard my poster bed creak so I stopped and ordered flat sliders which required me to only lift them up a very small amount. That worked better in this instance and I used the crowbar on wheels from this set that was included. I would use them if I was moving a piano or a very large item. Hope this helps.

These medium sized, five caster square plate furniture dollys are really fit for purpose . Build quality particularly the roller bearings and the surface contacts is superb. I was able to hoist onto the pads a 750 lb six foot long dresser by myself and to move it on carpet and hard wood floor easily. Very sturdy and no slippage off the steel plates that have two flared side rims to prevent slippage. One minor quible is the length of the lifting lever arm another three inches would have be a huge benefit. Solid rollable and a game changer for me

I really hate to write a bad product review as they seem like high quality but in this case I feel I need to let potential buyers know exactly what to expect. Unfortunately, I returned these less than 24 hours later after receiving them so I can't upload a video. But, in my case these were useless and could have caused damage to the floor or furniture and even possible injury if I had tried something bigger to move. In my instance I tried to move a super oversized old heavy recliner, and it had the small screw in knobs for feet on the heavy bar frame. To be clear the bottom is basically four metal bars that make a square shape with screws in all four corners with a small one and a half inch in diameter hard plastic knob foot. Unfortunately, it was also the screws that was holding the bottom frame together as well so I couldn't just unscrew it or the frame would come apart. Even If I could have, I don't think it would have made a difference as it was only about a two-inch-wide bar and wouldn't have covered the entire top area of the dolly. Anyhow I didn't use the bar to lift it so I can't comment on how well the bar works or any of the other items included. I had help with someone lifting up one side as I had to get down and under the recliner practically to place these on the frame corners. When placing them they wouldn't even stay in place. I spent a lot of time trying to adjust them once all four were under the corners, but nothing seemed to work they tilted, tipped one even came rolling out from under it leaving one corner without one. I should clarify that this recliner is completely level sitting on the ground, so this isn't an issue of the legs on the recliner being uneven or an uneven floor. Lastly after 15 minutes or so once I was able to get them somewhat situated, even though some were tilting I tried to roll it a short distance just to see if it would work. To their credit it rolled but it was completely unstable. They wobbled back and forth, and the whole set of dollies twisted and turned, even tipping and tilting under each leg. They were all over the place is the best way I can describe it and this was on a hard surface floor. If I had moved it much further than a few feet or more I feel the dollies would have come loose and it would have fell and damaged the hardwood floor. So, at that point I decided these just weren't safe enough to move them any kind of distance safely. So, I packed them right back up and returned them. To be fair I do want to say these seem heavy duty and honestly might work with only certain types of furniture like a file cabinet or boxes. Let me explain. If and only if you have furniture that is completely flat and level on the bottom, even weight and the corners cover most or the entire top of the dolly it might possibly work for you on a level hard floor. They do seem heavy duty and I suspect they could hold a lot of weight. But I can't say for sure. My recliner is probably 150 to 200 pounds possibly, maybe more. So, I can't judge based off of my experience and wouldn't want to make any claims to the amount of weight it can hold. Speaking on the item itself, I'm not sure if I got a return but mine were already assembled which was nice. I did notice some slightly small scratches on it but could have been manufacturing defects as they seemed new for the most part other than the scratches. I will say the padding that's provided is seriously lacking. It's basically a paper thin felt material type sticker. But, other than the so called padding, everything else seemed high quality until I actually tried to use them. So all in all I would say avoid these unless you want to take a chance with something like I described above that it might work for.