MAGIC JOHN 2 Pack for Samsung Galaxy S22 Ultra Screen Protector [Ceramic film] Not Glass 6.8 inch,[100% Fingerprint ID Compatible] Easy Installation Tray, 3D Curved, Bubble Free, HD Clear, Case

The installation of this screen protector was most excellent with no real problems. The one issue I took with it was the corners. It may have come down to either defects in the Samsung display panel, or maybe the environment that I was in during the installation. But ultimately the corners would occasionally start to peel up. I was able to press them back down and they would hold for several weeks to a month, but they would begin to peel up again and would need to be pressed back down. That being said, it did the job that was reqired and protected my screen from quite a bit of abuse that would have made lesser protectors crack or tear. The only other screen protector I had that was better than this came from Zagg. But Zagg is expensive and made from Unicorn tears, so that is that.

Purchased for my Galaxy S22 Ultra phone. You begin install by watching a short video. Of course, I immediately was confused by fingerprint instructions, but since I don't use this feature, skipped it. Person giving instructions speaks very quickly, so watched a couple times. Install was very easy using the template frame. I had a couple tiny bubbles, but really can't see them. Installed film is crystal clear. 100% better than my old protector, plus 2 are included. Would buy again.

I can't show what was wrong with the product as my camera device is my phone, otherwise I would have shown a picture.I am an IT Technician. I work with tech and tech products a lot and know most of the ins and outs. As a tech, I understand that I will never know everything, as technology changes everyday.Now, on to my issues.This screen protector product, in my honest opinion, is not good at all. I don't write many one star reviews as I usually find some good in anything I buy. I followed the video they give you, through to the end and noted every last detail they listed. I also looked at the packaging to make sure nothing was wrong with it. The screen protector still failed me.There were bubbles on the sides, and after applying then removing both protectors they provided, I noticed something. The sides of the protectors are slightly warped. The flat parts, where the protectors run parallel to the screen's surface area, are perfect. The curved edges though are not. The warping creates small pockets that allow air in and that is how the bubbles are created.Also, the frame and application front are slightly misaligned. The holes that are punched out, do not fit well over the application frame and that can cause issues when applying the protectors. I didn't have any issues with that thankfully because I pressed on them firmly, but others might.Now, if your phone doesn't have curved edges, I highly recommend this product, but most phones today do and that is the issue. If they work on how the protectors are made for the curved edges, I am willing to give this product and manufacturer another try. Until then, a one out of five is all I can give.

So I've seen many reviews speak to the air bubbles that formed along the curved edges and I'm there with you. It happened to me as well. The other issue I saw people mention were that holes didn't align when placing the cover over the tray. That also happened to me. So in fact the first cover I used didn't quite work out because of the holes not aligning. It caught me off guard in those few seconds you have to place it down without getting any hair or other particles stuck to the screen. Combining that with it's tendency towards air bubbles made my first attempt require a do-over.So I used the second screen, this time knowing that I would have to pull tight to line up those holes and not remove the protective top film until I was done pressing out all the bubbles first. I figured it was better to do it over that then on the actual screen protector.But those are the only reasons I'm not giving it a five-star rating. Right now, in my closet is a large box with screen protectors from literally dozens of different companies accrued over the years. I would be a little too OCD about my screen protectors back in the day. One air bubble that I couldn't get out meant redo. These days I'm a little more lenient but on this second attempt there was only one air bubble that remained on the bottom right corner of my screen, Right there on the curved edge and It took a few attempts of smoothing it out, then letting it bubble up and repeating that process maybe three or four times and I'm looking at it right now and it's finally gone.But comparing that to the more flimsy rubbery screen protectors out there makes that a small price to pay. I wish I can go with a tempered glass but I just can't get past that stupid, stupid rubber circle under the screen for the fingerprint scanner. How on earth do companies think most people wouldn't mind that? This has the best of both worlds as far as I'm concerned. It's still firm enough to provide a pretty solid protection, it's very fingerprint resistant and I mean very. The fingerprint scanner works really well though you might need to reinput your fingerprints if you're having trouble. I didn't and I'm doing okay I just need to press a little harder at times is all. And it isn't gradually sliding over to one side like the rubber screen protectors do. It feels like glass, it self-heals like the rubber screens, And honestly at the end of the day the installation process is about a simple as it gets if not a bit tedious when trying to make sure you get all the bubbles out. Kind of reminds me of the tempered glass days though in that respect.

Decided to order these after seeing them for sale on one of the major social media platforms. My wife and I have the same phone, so the 2-pack worked good for us. Watched the video and followed the directions and the install went as good as could be expected. Very few to no bubbles and if there were any, they came out quite easily. One I got them installed I noticed that the surface is very slick and tends to resist fingerprints. It also cleans very easily because of this. both of our phones also have cases on them, and unlike some of the other screen protectors that I had used in the past, these did not try to come up at all when the cases were reinstalled on the phones. They look really great on the phones and seem like they will work out very well. Time will tell. If I find out otherwise, I will come back and revise my review. Touch screen also seems to function well after the install.