LIQUI MOLY Oil Additive Cera Tec | 300 ml |SKU: 20002

I recently experienced a remarkable transformation in my 2016 Mustang Ecoboost, thanks to the LIQUI MOLY Oil Additive Cera Tec 3721. As someone with a passion for automobiles and a background as a software engineer, I'm always on the lookout for ways to improve my vehicle's performance. This product turned out to be a game-changer.One of the issues I had been facing with my Mustang was a persistent knocking noise, which can be quite concerning for any car enthusiast. After researching potential solutions, I decided to give LIQUI MOLY Cera Tec 3721 a try. And I must say, I was pleasantly surprised by the results.The primary reason I opted for this oil additive was its promise of ceramic wear and tear protection. As someone who values the longevity of my vehicles, I wanted to reduce engine friction and wear as much as possible. This product did exactly that. The moment I started using it, I noticed a significant reduction in engine noise, especially the knocking sound that had been bothering me. It provided a smoother engine performance, and the difference was noticeable.What impressed me even more was the impact on fuel consumption. As someone who loves to travel and has explored six states during my time in the USA, fuel efficiency is a key concern. LIQUI MOLY Cera Tec 3721 not only improved my engine's performance but also led to lower fuel consumption. This means fewer stops at the gas station and more miles of adventure.Moreover, being a mentor and research assistant, I appreciate the science behind this product. It's clear that LIQUI MOLY has put considerable effort into developing a high-quality additive that benefits both petrol and diesel engines. This is the kind of innovation that I believe will shape the future of the automotive industry.In conclusion, LIQUI MOLY Oil Additive Cera Tec 3721 has not only fixed the knocking noise in my Mustang but has also enhanced its overall performance. It's a product that aligns with my goal of staying at the forefront of technology and innovation in the IT sector, even when it comes to my car. I highly recommend it to anyone looking to improve engine performance, reduce friction, and achieve better fuel efficiency. It's a small investment with significant returns for your vehicle.

I’ve been using Liqui Moly Cera Tec in my Audi A6 3.0T, and the results have been impressive. This high-tech additive contains ceramic microparticles that form a protective layer on metal engine parts, significantly reducing wear and friction.✅ Key benefits:Improves engine smoothness and reduces annoying noises.Extends engine life by minimizing wear.Compatible with all types of oils and engines (gasoline and diesel).Enhances overall efficiency and performance.It’s easy to use—just add it to the engine oil during an oil change or top-up.Overall, Cera Tec is a smart investment to protect your engine and boost performance, especially for high-mileage or demanding driving conditions.

I just want others to know that this stuff is no joke. It works. It’s smooth my engine out rough idle gone that had a slight lift or tick. It stopped. It’s fantastic product. Try it once and I promise you’ll be hooked.

Update 1-26-2019:The BBQ/Typewriter tick came back this morning. So, I'd say that if you're trying to use the Ceratec to quiet the tick, it will work for a little while, but will eventually return. I don't think there's anything else that can be done to quiet the tick and it's a crap shoot if you get it serviced. In my case, it only ticks during warm up after the transition from high idle, and goes away completely once the entire engine is fully warmed up, so I'm just going to live with it. I'm still giving the Ceratec a 5 because it did reduce my friction enough for a small MPG improvement, so I believe it works as advertised and I'm not going to blame them for not silencing the tick.Update 1-20-2019:After a few days with only the one bottle poured in, my tick came back. Since one bottle is only 1/2 the recommended concentration for the 10 quarts in a 2018 Mustang GT, I bought another bottle and added it and the tick is now gone again. We'll see if it lasts. I can tell you that my fuel economy has improved. I have a little over 11,000 miles now and I always display my fuel economy meter and I use it. I've never reset my average fuel economy meter since the day I bought the car new. I've been pretty well stuck at 21.6 MPG for the last couple months. Since I've put in the Ceratec, my average fuel economy has increased to 21.8 MPG, so it's jumped 0.2 MPG in roughly 2 weeks. With over 11,000 miles included in the average, it takes a pretty significant improvement in friction to make that average move that much in that short a time. Even if my tick comes back again, I'm sold on Ceratec for the friction reduction alone. I'll update the review again if the tick comes back.Original Review:My 2018 Mustang GT developed the infamous BBQ/Typewriter tick immedaitely after my first oil change. I used Mobil One synthetic at 3500 miles on my first oil change. I did my 2nd oil change at 10K miles with Mobile One, but the tick was still present. After seeing people on YouTube having success eliminating their tick with Ceratec and after reading the one other review of a 2018 Mustang GT owner here on Amazon, I decided to try it.I ordered 1 bottle. It arrived on a Friday and poured it in immediately after I got home from work. It's an hour drive one way to work, so the engine was at operating temperature, where, in my case, the tick goes away. I only get it when the engine switches from high idle to normal idle after a cold start and the tick is quite loud for at least the 15 minutes it takes for me to get to the drive through where I get my morning coffee, where I can really hear the tick echoing off the wall.After pouring it in, I started the car and let it idle, but didn't really notice any change. I then took it for a drive and did some hard pulls to get the engine to rev under load to the red line. After that, I put the car in the garage until I drove to work on Monday.When I went to the drive through to get my morning coffee, there was no tick! It was gone! I listened real hard, but all I could hear was the normal direct injector pump noise. Then, after my hour long drive to work, I left car running and got out to listen. With the hood closed, it was quieter than at any time since I bought it. It was virtually silent. Even the DI pump noise was barely audible. The car also sounded and felt different during the drive to work. The engine seemed like it was smoother somehow. It might have been my imagination, but after the silence in my parking spot at work, I wouldn't be surprised if the engine did run smoother.At any rate, I only used 1 bottle to treat the 10 quarts of oil, which is half the amount the mfg says to use. So, I'll see how long it lasts, but it definitely worked even at half its normal concentration. I highly recommend it for anyone who has the 2018 Mustang GT tick.