GeForce GT 610 2G DDR3 Low Profile Graphics Card, PCI Express 1.1 x16, HDMI/VGA, Entry Level GPU for PC, SFF and HTPC, Compatible with Win11

Purchased this GT 610 2G 64-Bit Graphics card after suspecting failure of the onboard Video Processor for my Dell Optiplex 9020. Installation was under 5 minutes, my system was back up and running after rebooting twice for recognition after the repair. This card is a little on the low end but it is rugged and works very well on my office desktop, running at 1920 x 1080 Res. I will say it is well worth the price paid; saved myself over $900.00 plus associated downtime in less than 10 minutes; not bad.

This low-profile graphics card fit inside my Dell Inspiron D06S computer perfectly, and works great! (My on-board graphics output quit working, so I had to install this card to be able to use my computer again.)

I added this to a Dell Optiplex 990 SFF (small form factor) desktop. Running Win10 and connected to a VGA monitor. I got the driver from www dot nvidia dot com slash en-us slash geforce slash drivers slash results slash 132845 You will need this. After installing and rebooting, Windows 10 defaulted to some very low res low functioning driver. It was helpful I already had the driver installer downloaded. Physically it could be a little challenging. If you'll be using the SFF adaptive rear plate, watch the video on the product page but be aware for the screws in back he is using a socket driver, probably 6mm or something close. If you're stuck here without a socket that fits, you'll need to use pliers, carefully. You'll need to reuse the screws. The screw that goes into the board is a Phillips, probably a #1. This was actually not needed for the replacement plate that I got. Fitting the thing back into the computer case takes some careful alignment at both the bottom and top of the rear plate/bracket combined with carefully getting the card edge into its slot. Getting all 3 areas properly aligned at the same time and carefully using just enough brute force. Work on a sturdy table with adequate light and you can do it! Then fire it up, and run the NVIDIA driver installer, don't mess with Device Manager or anything; it's not needed.

OK video, but I had to use the VGA port and a VGA->HDMI adapter. The HDMI port doesn't seem to be active on this card. I have done some research online and many report this model (not just the vendor) as being prone to this. Note that this is a low profile card, not for use in standard computer cases, although without the metal tab, it WILL fit in any PCIe slot. Most WIndows versions recognize it immediately, so installation is trouble free.

Used for an old ddr3 server for media transcoding and works great for small use. Not beefy enough to multiple streams though. Also, watch the fans if you are troubleshooting a system. Took the tip of my finger off almost

Adds HDMI, Small Form Factor (SFF) bracket makes installation easy. Good price and good value. Nvidia drivers automatically install on PC's running Windows 11. Works as intended.

Worked as expected for a 2010 era HP Slimline case. Came with the low profile bracket and plugged into the motherboard just fine. Booted up and WIN7 immediately recognized the GPU. Installed the NVIDIA driver and now my computer can run (2000-206) era games at max settings with no lag.

In Windows 10 after the computer had been on awhile i went to device drivers and seleted to update driver. windoze10 went and found it and installed. Now both montiors work, vga and hdmi at the same time. Windoze 10 loaded the NVDIA GEFORCD GT610 Driver, for your infomation. Hope that helps.

High quality, reasonable price and good delivery time.

Wanted to run this graphics card on Windows 10. However when I installed it there was no drivers with it and it wouldn't work so I ended up taking it to a "teckie" friend who sorted it out for me.

Good basic video card that should satisfy anybody but the most ardent Gamers or Hipsters.

動作も良く、画質も良好だと思いました。

Delivery was outstanding. Had me going back for more