DOWNLIGHT SPOTLIGHT HOLE CONVERTER KIT - BOTH GU10 & 12V FITTINGS INCLUDED WHITE

Bought to replace very dated old eyeball spots. The blanking plate only just fitted our very large ceiling cut out so ended up cannibalising the old fitting (and spraying it white to match) to cover the hole edges neatly. Assembly instructions are text only- a photo or sketch would have made life easier. The connections are simple enough but quite hard to manage with less than eight arms . Holding the connection box (which detaches once the cover screw is removed) the blanking plate now dangling from the ceiling wire and the newly assembled bulb holder. There is an Interesting mix of slot and cross-head screws too so you need your fourth, fifth sixth and seventh arms to hold two screwdrivers and manoeuvre the supply wires and the wires on the unit. I found it best to leave all the screws of the chocolate box connector open until both wires were in situ, then tighten. Leaving your eighth and last arm to simply hang onto the step ladder! In the end they work and look pretty good, once the blue air has cleared.

Updating my ceiling lights removing the adjustable type and fitting the flush, great job, simple to fit. Would recommend this company.

This kit is OK, but you will have difficulties with getting some LED bulbs to fit in the recess and to get the spring clip to ho;d the bulb in place unless you bend the retaining brackets that hold the springs inside the fitting to allow the bulb to fit deeper into the fitting. Not easy to explain and not easy to fit - not for the novice.

Everything