2 Pack 13.3” Anti Glare Screen Protector Compatible 13.3" Dell Inspiron 13 /13.3” ASUS Chromebook & ZenBook /13.3 Acer Chromebook R13 / 13.3” Lenovo Yoga 720 730 /13.3” HP Spectre/Pavilion 13

I bought this because I use a laptop with a very glossy screen sitting against a wall opposite a window, so there's always been lots of glare, and unfortunately rearranging the room to get rid of this isn't a great option for me. This screen protector has made all the difference in making my laptop usable again.From the pictures you can see my laptop with the screen protector, with the screen both on and off. You can see the clear bright refection of the sunlight from the window above the protector, and hopefully you can see how much the protector diffuses that light and successfully removes the glare.The reason I have bubbles on my screen is my laptop is 5 years old and I basically never cleaned the screen. So when I was cleaning the screen to prepare to put on the screen protector, there were some dust particles that just *would not* come off. So the bubbles are not the fault of the product. And what's great is that the bubbles are nearly never visible, and even if the light is shining on the screen at that exact angle where they are visible, seeing them is still way, WAY better than glare.It comes with a card for helping to remove bubbles during installation as well as a sticker for picking up dust particles, which both work great. Also comes with small rectangular "guide stickers" to help you install it in the right position, which personally I didn't find useful.The size of the protector is nearly *exactly* the size of a 13.3" 16:9 screen, so it's easy to accidentally install it at a slight angle so that a little bit of your screen remains exposed. However I think it's forgiving and lets you try again without ruining it if you don't get it quite right the first time (as long as you haven't stuck on the whole thing yet). I ended up using one of the 2 as a trial run. Since I have such a wide margin around my screen I might have tried getting the 14" version if I'd known this but I managed to install it well enough that I don't notice it at all so I have no regrets. Of course, this sizing is a great feature if you happen to have a machine without such a margin around the screen.Finally, my laptop has a touchscreen and it still works great.In summary this product works great as advertised -- it removed the glare from my screen and made my laptop usable with daylight behind it. You need to be careful with installation but it isn't rocket science, and even though I have a few bubbles they really aren't visible with the screen on.

Fits my Asus zenbook flip 13 perfectly. It is always tricky to put on a screen protector for something larger than a phone. However it comes with a set of guide stickers and dust removing sticker that helps with the placement. There is also a squeegee card that can use to push air bubbles out.My recommendation, go into the bathroom and turn on the shower with some pretty hot water so there is a good amount of steam. This helps remove the dust in the air. Turn off the hot water and wait for a bit for the steam to dissipate and then take your time and work slowly. Be patient and it will work out okay.For me I use a stylus quite a bit to annotate lectures, the screen proctor preserves this functionality with no hic-ups.

1) Two screen protectors come in the box, so if you mess up, there's another. But if you apply it right, you won't need it I plan to save it for when this screen protector gets messed up over time since I plan to take notes with a stylus (which can cause small scratches).2) People who had issues with the application probably took the entire protective film off first and stuck it straight onto the device. DON'T DO THAT! Instead, make sure to line the screen protector up exactly with the display and slowly peel off one corner. Then with the "squeegee" (for lack of better term), slowly push the bubbles away from the sticky parts that you've exposed to the screen. Make sure to suck the life out of every single bubble that appears AS THEY APPEAR, don't "save them for later" because if you do, they're never going away. Also, make sure your screen is completely dust/oil free. I wiped my screen with a Lysol wipe and used the included microfiber wipe to get rid of the dust before I even thought about application!Pros: Very matte, reduces glare significantly (compare the display area of my screen with the unprotected border - big difference), easy to install (just take your time!), has a "papery" quality so it feels nice to the touch, a value since you get twoCons: does reduce screen quality but no horizontal lines as another reviewer had experienced, the top protective layer (red sticker) is a little difficult to peel off, be careful when doing so! the "squegee" is lined with a cloth that protects the screen protector from scratches during installation but it sheds so some of the dust from my aggressive bubble destroying is stuck on the edges of the screen protector (not very noticeable though), also the dimensions are very tight (there's no room for error when you line the screen protector up)Experience: Good! The two small bubbles I have are at the very edges of the screen (on the bottom toolbar and right scrollbar) and are only there because I missed two itty specks of dust during the beginning of my application. Since the plastic is a little static-y, lining it up initially while peeling the back film off was a little tricky but do-able (there's a sliver of screen under my toolbar the I missed, but it's so small, I barely notice).Device specs: I have a HP Spectre x360 40-xx with a 13.3 inch display

It still cannot read anything on my computer screen. The lights are now scattered instead of a line or a single circle sun reflection on part of the screen. It’s impossible to install it correctly. After cleaning the whole screen with microfiber cloth or whatever. It doesnt matter. The plastic sheet that protects the matte screen protector touches the screen as you install it and leaves dust all over the place. If you hold that plastic sheet higher, then the screen protector snaps out of the screen. It’s so hard to install this. I used two of them because the first one left like 90 bubbles then second one made the situation even worse. It doesnt worth trouble and it didn’t remove the glare as well. It might work well if you just get it to protect the screen of your tablet or something. However, the only reason I bought is to prevent glare.