32 Colors 3D Pen PLA Filament Refills,Each Color 13feet,Total 419 feet 3D Pen/3D Printer PLA Sample Pack, Compatible with MYNT3D / SCRIB3D Printing Pen

This is some great filament! I've printed numerous projects with it so far and it's been perfect, no clogs, adheres well and is spooled great. I got the color change green/blue, and it prints better than most regular PLA that I've used. 200/60 on an Ender 3 v2. I will definitely be trying out their other varieties. BTW, the color change aspect works great and looks good! The only thing I wish is that they had more color changing options for colors. I'd love a blue/purple or white/black. Get this filament!

I threw this on the bambu and used the generic settings but I upped the speeds to about double what I normally use. As you can see the benchy came out relatively good! I think with a bit of tuning I can get even better quality and still have double the speeds. I'll probably be switching over my filament to this high speed stuff in the future.

This is more of a shiny red with glitter than glow in the dark but printed it looks great. Worked fine in my Bambu carbon. Comes on a cardboard roll

I purchased this for a few different project's unfortunately for the primary project it did not turn out the color I was hoping for. I was hoping for a bit more blue it mainly is green. The filament itself is the color in the picture the color you get once printed is shown in the picture. I did end up using it mostly on a fight stick which the temperature color changing is pretty awesome. So, in the end it did come in handy.

I made this filament into a dragon because I thought as I played with it the color would change but I was mistaken. It only changes color when I put hot/cold water over it or I take it outside and there is a drastic change in temperature between indoors and out. It's very stringy and doesn't hold together well. My rose dragon looks like it's dead and decomposing rather than alive and ready to take on the world.

The plastic prints smoothly and has no stringing (with my settings)

I ordered this under the impression that it was a temperature sensitive color changing filament. What I received was a dual color filament that is not color changing. If it was color changing, the whole roll would be a uniform color sitting at room temperature, but each side of the roll shows a different color. I tried a small test print to see if my assumptions were correct, and the print shows one side blue and one side green.

Loved it

Eine Schöne leicht leuchtende Farbe. Finde Sie echt schön. Es geht in meinen Augen eher in das hell leuchtende Grün. Blau und Gelb denke ich durch die Mischung nicht ganz getroffen. Aber Das Filament wieder Top. Keine Probleme mit dem Drucken, super Rolle ( Keine Papprolle) passt leider im Bambu nur in den Externen Slot was aber vollkommen okay ist.

Me está resultando genial este filamento de impresora 3D YOUSU PLA de 1,75 mm y 1 kg ya que es una opción excelente para imprimir con una impresora 3D o un bolígrafo 3D. El PLA (ácido poliláctico) es un material termoplástico biodegradable y no tóxico, que se deriva de fuentes naturales, como el almidón de maíz, lo que lo hace una opción más amigable con el medio ambiente que es algo que yo siempre valoro mucho ,este filamento YOUSU es de color azul y tiene un diámetro de 1,75 mm, lo que es compatible con la mayoría de las impresoras 3D y bolígrafos 3D que utilizan filamento PLA de ese diámetro.Es importante tener en cuenta que el filamento de PLA es más propenso a la deformación por calor que otros filamentos, por lo que se recomienda imprimir a una temperatura más baja, entre 190-220 grados Celsius. Además, se recomienda almacenar el filamento en un lugar fresco y seco para evitar que absorba humedad aunque en mi caso no ha sido necesario puesto que me he puesto a trabajar con el filamento nada más llegarEn general, el filamento de impresora 3D YOUSU PLA es una buena opción para los que buscamos un filamento de PLA de calidad a un precio razonable para sus proyectos de impresión en 3D.

Im using a prusa i3 mk3s+.I tried a 0.25, 0.4 and 0.6 nozzle for this, various flow rates, temperatures (up to 230!) etc.It constantly crackles and spits out unmelted chunks. The colour doesnt go back to the blue after extruded (decomposes and stays at the 2nd colur).You can see the results of my 1st layer calibration even with lots of hairspray and gunk to make sure it sticks on the bed. Its not an adhesion problem--- its a bad filament problem.Poor quality and poor quality control.

The media could not be loaded.  Impresión fácil a 210 grados.Buenas adherencia entre capas y color brillante.

A pesar de ser un fabricante desconocido me esta gustando, viene muy bien liado sin lios lo que ayuda a que salga sin problema, ademas del rollo de PLA viene una bolsa zip para poder cerrarlo herméticamente sin humedad..Sus resultados estan siendo buenos, pega bien, entre capas y su tolerancia es buena.Un gran descubrimiento, volvere a comprarlo seguro.