🛠️ Stick with the Best - Your Go-To Glue for Every Project!
The Bob Smith Industries BSI-133H Insta-Cure+ Gap Filling Super Glue is a versatile adhesive designed to bond a wide range of materials including metal, plastic, wood, ceramics, rubber, leather, and glass. This 1 oz bottle features a compact design and includes an extender tip for precision application, making it ideal for both professional and DIY use. With a quick curing time and lightweight packaging, it's the perfect addition to any toolkit.
K**R
Very Fast
This product hardens extremely fast and glues wood, plastic, glass and other hard surfaces. The bond is nearly perfect, producing a original strength bond. Care needs to be used not to glue your fingers together while using the product, because you can lost some skin getting your fingers apart. Have used this product for over 20 years for model building and repairing all my wife's broken things.
S**N
Great super glue
It's a great glue, it works really well, it still can go a little white if it cools too fast with cold air, but usually it doesn't do that so much. On some materials it sticks within 5 seconds, such as leatherette, but the wood can take about 45 minutes if I'm gluing magnets to wood. The amazon listing is a little confusing, the title says you are purchasing 2oz, however, the photo's show 1/2oz, 1oz, and 8oz, and there is only two options in the listing, one of which says 1/2oz which is misleading, I would like to order the 8oz on amazon.
D**D
NICE PRODUCT! FAST SHIPPING!
NICE PRODUCT! FAST SHIPPING!
M**K
Thicker than Normal Superglue, but it still flows fairly freely.
A number of weeks ago I pieced together glass for an outdoor lighting fixture. I used a different glue but it didn't fill in all of the gaps, so I got this Superglue to fill in.Despite it being Thick Superglue, the glue still flowed rather freely.This was a quick set Superglue despite it being a Thick Superglue.It did do a good job of filling cracks just under 1/8th of an inch.When using this glue you need to be assured that the upon completion of the dispensing, you need to do something to assure that the tip of the bottle doesn't plug off with Superglue. The best I have found so far is to keep the bottle upright in storage, and then slowly squeeze the bottle until air comes out. Tapping the bottle on a hard surface can also loosen up liquid glue that is in the spout.If you find the spout plugged right before you are ready to glue something you can do one, or multiple of the following:1) Cut off more of the tip2) Stick a metal. larger sized paperclips into the top of the bottle.3) If you are unable to use a paperclip to poke into the top of the bottle because the glue in the tip has gotten too strong the last resort it to take a 1/64th to 1/32" drill bit and drill out the plug in the bottle.
R**O
Great glue ruined by a crap dispenser
The dispenser invariably gets crusty and clogged and makes it hard to dispense a predictable amount.Also Bob needs to make a thicker version of the 2 second glue. This stuff is way too runny which also makes it hard to predict with the crappy dispenser.Fix the container please, Bob. The 8oz version has a much better dispenser.
T**U
Best CA glue
I love this CA glue. It has the perfect viscosity to where it won't run too much making it really easy to apply just where you want it. I've tried a lot of different CA glues and this one is by far my favorite.
J**G
should be a standard household get
bsi instacure+ should be a standard household get, like a screwdriver, hammer, ruler, etc. definitely have a long pin type object of some sort and some toilet paper or paper towel handya dot cures very rapidly, just let large amounts cure overnight. ive installed shelfing with this, repaired and locked old storm windows with weather strip tape, mounted cables to walls with a dot here and there; if you get anything with weak adhesion you can always just add a dot or two of bsi instacure+ to basically permanently adhere that object to the surface, without it being totally unreasonable to pull or cut off and maybe using some acetone or a fingernail to completely clean the surfacethis should *definitely* be a household standard. you would be *surprised* how many times i guess you can just have a need for rapidly-curing industrial strength superglue
T**S
Don't put it between two fingers.....
BSI is our choice CA for our company. We use to to adhere plastics, light metals, wood, etc on the high end models that we create and ship worldwide. Our customers demand exacting models, so we have to demand a CA that will still be holding parts together after 25 years. BSI Adhesives are some of the strongest in the market. We have used jet, Gorrilla, Starbond, Loctite, and others. There is a good reason why BSI is our CAof choice: It outperforms their competition.Also try their IC-2000. It is rubber impregnated and keeps delicate items secure in their place.
Trustpilot
5 days ago
1 day ago