Generic X99 Dual CPU Motherboard LGA2011 Support DDR4 ECC Memory PCB Durable with 2XE5 2650 V4 CPU 12 Core 24 Thread Processor

Good product at best price.Just 1 NVMe slot is working . I added extra card to work other nvme .and seller is best who provide fan mount option with mother bord . without fan mount it will big problem for me . Many thanks to seller :)

After using it for one month i am fully staisfied with its performance. Few things1. It uses bios which is legacy, I don't feel it is makes this motherboard slower to boot.2.Package and delivery was good from amazon.3. The vendor has installed cpu fan socket, which helped a lot. The cpu fan socket which came with the processor fan was not fitting well.4. I use 4 modules of ddr4 ram 2400 mzh, though it supports 3200 mhz, when i verified intel documents the xeon e5 does not support higher mhz, but it may support, to be on safer side i sticked to 2400 mhz.5. It supports nvme, i got 1 tb nvme from amazon and performance was awsome. It doesn't need any driver to detect during windows installation.6.GPU it supports almost all GPU, but i am not using it for gaming i am using NVdia 2 gb pci colourful brand, which is good and it doesnt need additional power.7. PSU, you need to be careful in choosing this, since this has two processor fan, cabinet fan and other power requirements, i choose Deepcool Bronze PSU,Both CPUs can work in single 8 pin connector but if you are giving more load use both cpu power connection. Also use ths big pin cable 16 amp, if you use 6 amp three pin it can cause short circuit.8.Cabinet any cabinet which can support E Atx motherboard, i use Ant Sports.9.Power supply needs ups supports minimum 1 kva, if you connect to normal 600 ups it may still work but can overload it.10.Windows 10 is supported and works well, windows 11 is not supported since it needs tpm module, there are ways to run windows 11 but dont fight, Windows 10 better for this. Get a genuine Windows 10 key, all drivers will be automatically installed with windows update.

Value for money dual socket X99board supports two Xeons. The Seller was very helpful. Initially the board didn't work, but the seller replaced it. When I tried with non-ECC RAM , i was able to get it to work with only one CPU. After i replaced with ECC ram , i got it to work with both the CPUs.

Motherboard is not exactly the same as per the pictures. The CPUs that came in are V3 instead of V4. One of the CPUs has resisters broken at bottom, did not work first but after lot of RAM and CPU swapping they worked. Sometimes one CPU does not detect at boot along with RAM on its banks, but work after a cold restart. Working now. Lets see how it goes.UPDATE after 1 month - one CPU died permanently. I had to purchase the same from desertcart. The new CPU works fine.

Good Value For Money, You have to spend Atleast 50k to Get Similar Performance with other Board and Processor

I am writing after 1 month of continuous use.I have done cfd in openfoam v9 for my phd.1) I have tried with various non ecc rams but only ECC ram works.2)Carefully chose a power supply with 2 4+4 8bit cpu power supply like deepcool broze otherwise u will be forced to buy an extra eps connetor which is very expensive.3)Choose a fan carefully because ram slots are very close to cpu so large fan may make some ram slots inaccessible.4)choose any eatx cabinet preferably with psu on top otherwise you may need some extension cable.Pros.1)Nothing beat this system in price to performance. I completed my whole build in just 44 thousand.2) friendly seller.Cons.1) this motherboard board has only 4 memory channel instead of 8.Nothing can beat a quad memory channel system in some specific usecase like cfd or scientific computing. Definitely recommend if power consumption is not an issue.

The media could not be loaded. First i had many doubts about this motherboards. now after building an full pc from this i am very clear. and glad i didn't miss this product. the seller is also very supportive. they provide there contact number with product to call or whatsapp.About this product:If you are an beginner please go though others review to understand what should be done and what should not.Things come with this product:1 Mother board, 2 processor, 1 CEMOS Battery, 1 SATA cable, 1 IO pin bracket, 2 Cooling Fan Clips.they did not mention cooling fan clips will be provided. i was in a dilemma to buy it, because these 2 fan clips price will come around Rs.2,000/-. so, i bought a cooling fan with screw that fits with this model.only after receiving the product i came to know, they will provide it.The Products List Bought to Build PC from this Mother Board:Graphics Card - ZEBRONICS Gt610 2Gd3https://amzn.to/40VCE3bATX to EPS Cablehttps://amzn.to/4hBTc7hCabinet (Chose E-ATX model)https://amzn.to/41hlLBpCooling FANhttps://amzn.to/4gCjvsVSSD - 1TBhttps://amzn.to/3CTXqIqPSUhttps://amzn.to/42Yn2ymRAM - DDR4 2x32GBhttps://amzn.to/4i1KMGhChair (Just in case if u need a comfortable chair like me)https://amzn.to/3CFNFh3total cost came around 41k after deducting offers