Hand Held MIG Welder Machine 110V, HIZONE 100A Flux Core Portable Welding Machine, Handheld Gasless Inverter Wire Feed Welding Equipment

Very surprised at the welds produced by this welder! Myself and another more experienced welder made several beads and tacks on 10 gauge and 1/4" pieces. I had a lot of splatter with the settings used but he was very impressed with his welds, less splatter and the weld strength. I maxed out the settings due to using bigger than the recommended 1/8" thickness. We work in a factory and usually use portable millers that take time to transport and set up. This welder could be used for simple fixes and worked fine on a 25' extension cord thus saving some logistic issues. The gun seems sturdy, is easy to setup and made 8" welds without faulting or other problems. It was easy to hold with gloves on and easy to direct the weld as well. The welder was used outside on a fairly windy day and wasn't affected due to the flux core. For the money, this welder is well worth it and performed as expected. The instructions were better than normal Chinglish but no adjustment chart is included so practice pieces may be needed.

Wow! This thing actually works and was not hard to setup at all. It's light enough to handled with ease. Feed rate control is good, no issues with tripping a 15amp breaker. Used this next to my stick welder for comparison on some dirty metal home repair odd work. Was able to start the weld easier (less scratching and digging), pool was good, and flow was good. I'm better with the stick welder because of experience, but I'm going to make this my go-to for a while and see how things develop.

Real handy for remote work. Light weight and compact as compared to setting up a full size welder. Great for home projects easy to use and operate without spending a lot of money. Good quality product happy welding

UPDATE:- The first welder had a problem with the trigger switch so Amazon replaced it, the new one was immediately put to test, a real test, I just built two gates that are 24ft wide each out of 11 gauge steel using my Lincoln mig welder & stalled it, since the mig welder doesn't have long enough extension to do finishing job I ordered this welder to weld some chain brackets using the same 11 gauge plates, this small machine can do a really nice weld but expect no clean weld as your gas mig welder, not a big deal stainless brush can do the trick, I take time to write this review mostly those who have welding hobby or home owners who just want to do some repair works, this little machine takes no space or require a bulky 240V outlet but does burn through even 11 gauge steel. I originally gave it 3 stars due to the bad trigger switch. I am giving it 3 stars because the trigger stopped working on the first use, otherwise this is a very good alternative to a regular mig welder specially to do small repairs around the house, I am sending this back for exchange, the other issue I had was the only wire that works with this machine is the one that comes with it, I try to use the same size Lincoln wire but it wouldn't work.

Worked well! Used on my old truck to do some body work. Easy to set up ... good welds. Liked not requiring to roll out my other MIG welder system.

It's flimsy, it's cheep. It's slow but it works. No carrying case.

Have had wire feed welder in the past Lincoln 120 with argon tank. This thing surprised me! Yes it is flux wire, and portable portabke as in extension cord portable. Also have 225 Lincoln stick welder. Don't see much use for it anymore and will most likely sell it. Have had it for 2 weeks now using it for hurricane shutters.def t star!!! Just hoping it lasts. Also purchased. 35 wire for it. Haven't tried that yet, however, from what I've seen you can welder. .25" plate with this thing. First review of purchase on Amazon. It deserves 5 stars.

Didn't get to use it much about 3 times. I sat it upright on its base on the ground I was working on ... Gently....I went back to work it tipped over under its own force flat on the ground from standing upright on the base of the machine in which it was made for and tipped over not fallen from any height just the length of the machine itself and it broke and is UNUSABLE!!!! Now I knew I wasn't getting a workhorse by looking at the thing and even more so when I had it in my hand in person this is a light duty machine for light sheet metal understood and it didn't work half bad before it totally destroyed itself. The thing is if you have any work to do you shouldn't have to cotton ball baby a tool your working with just to do the work! The cheapness of the parts used is the problem the wire roller assembly is trashed just from a small tip over less than 6 inches off the ground . DO NOT WASTE YOUR MONEY!!!!!!!!!!!!!!!! IT LOOKS COOL YEAH AND IT WORKS SOMEWHAT OK FOR WHAT IT IS ...BUT NOT FOR LONG!!!!

I thought this thing was gonna be under power and would be good to use on thin metal like body work. This thing get 1/4" glowing red hot after a few passes. I had the mastercraft flux 125i before as a portable lil welder but this will take it place. Plus I think it welds better also. It's has weight but it's not to bad.

Super zur Reparatur Karosseriebau.

bien

Alles okay

Hallo erstens bekommt das Gerät mit einen EU Stecker. Dann habe Ich es mit einem Adapter probiert auf DE Standart . Also mein Stromnetz ist dafür nicht ausgelegt, weil immer die Sicherung kam. Dann habe ich den Stecker abgeschnitten und einen Schucko Stecker ran gemacht. Aber da das Kabel bloss 2 Adern hat kam schon beim Einschalten des Gerätes die Sicherung. Ich hoffe mir kann einer eine Lösung anbieten ,ansonsten liegt das Gerät hier rum.