FLEXISPOT E6 Dual Motor Standing Desk Frame 3 Stages Electric Height Adjustable Stand Up Desk Frame Only ((Black)

This arrived in great shape, It was well packed internally as well. The instructions well written and assembly was easy, The thoughtful design minimizes parts/ screws to be installed and unlike others desks had many preinstalled screws by design. No wobble - the frame construction is heavier then others. The paint, a nice thicker coat - helping prevent scratches from showing. This unit has a great weight limit and height adjustment range due to the 3 stages - both are key attributes if you want to add casters and/or a heavy butcher block desk surface which can add several inches to the height and pounds in weight. Another plus is the duty cycle lenght... long enought to allow you to raise then lower then raise... for instance - one decides to stand (raise), gets a phone call needing to sit (lower), feet on desk then back to standing. Not all desks frames will cycle this way. Not associated with this company but for background this is my 7th adjustable frame assembly (for friends and family) and I think one of the best at a good price.

I opted for this frame because it goes all the way down to 24 inches, which is perfect for me because I’m short and the standard 30 inches desks are really uncomfortable for me. I slapped a 60 inch 100lb butcher block on top and it’s been incredibly stable. There is a slight wobble at its highest setting, but it’s nothing problematic and I rarely have it that high anyway. It was also very easy to put together. All in all, this frame is everything I wanted and more. If you can get it on sale like I did, I would highly recommend it. The only thing I would suggest is getting different cable clips for under the desk. The ones it comes with don’t stick very well.

Flexispot always does it right. This desk frame is sturdy and holds a lot of weight. I’m using it in my workshop as an adjustable workbench. I even put casters on the bottom. This desk looks great and it was very easy to assemble.

The desk was trivial to assemble, and went together in minutes. The components are heavy, and that's a good thing! With three telescoping sections instead of two, it's quite stable, even at full height. Full height is over 50", which is too tall for me, and I'm 6' tall. Full down, at 24", is too short for my 7 year old. But the memory presets are easy to use. I saved some money and used the tabletop from my old non-standing desk, which is a heavy 1.5" thick melamine slab, and it lifts it effortlessly - while carrying the aforementioned 7yo, much to his delight. It lifts me too, but thermal protection kicks in after not long. The old desk is only 44" wide, which was a bit of a problem as the separate legs want a wider top to have the stiffeners in the middle, but by offsetting the legs a little forward and back, it works fine. The dual motor setup makes this easy, there's no jackshaft connecting the two, you could make an L-shaped desk or whatever pretty easily if the balance isn't too far off. If they're offset, that does make the table top an integral part of the structure, and puts the center screws in tension, but that wasn't a problem with my top. My only issue was that the collision detection function was initially too sensitive, but the manual includes instructions on how to adjust it, after which it performed flawlessly.

I bought this dual-motor model for a secondary workspace with managed expectations. After two years of daily use, I’m genuinely impressed with how well it has held up given the price point. It’s not a $400 desk, but it does exactly what it needs to do. For a lower cost when compared with premium brands, you get a dual-motor system and a functional memory keypad. It’s been reliable—no error codes or mechanical failures in 2 years of service. Once it’s at the desired height, it’s plenty stable for a standard office setup. The memory function is a lifesaver (as always) and has remained accurate since day one. The trade-off you're making with higher end models is a slow motor and a bit more sensitivity when the motor is adjusting the desk height. My experience with higher-end desks that zip up and down, you’ll definitely notice the pace here. It’s a bit of a slow climber. It’s not a dealbreaker, but it’s the most obvious area where the "budget" nature shows. The desk features an anti-collision/safety stop that is incredibly sensitive. If you even add a small amount of weight while it’s in motion, it will stop. While I appreciate the safety aspect, it can be a bit finicky if you’re trying to multitask while adjusting the height. If you want a reliable standing desk without the "premium" tax, this is a fantastic option. Just be patient with the motor speed and keep your hands off the top while it’s moving.

Everything I was hoping for. The build was easy, I’ve been running it for two months now with no problems at all, up and down 5+ times a day. Motors aren’t loud (phone says room is 50db when motors are running). On the 3-stage, it goes as low as 24” (bottom of legs to bottom to desk), and at least 48.25 (could go higher, that’s the limit of all my cables). That was a big concern of mine - some of the desks only go down to 26, which is pretty high if you’re trying to get perfect ergo. Presets are easy to set. Was able to repurpose an existing tabletop, so this was a steal. I’d grab some command strips for cable management, the built in ones’ sticker already gave out, but such a minor issue. Thanks so much!

honestly a great table. very sturdy and easy to use. nice finish on the wood. has a sliiight wobble when its a bit higher but its toelrable and otherwise has worked dependably for me for about a year. and at once point i had a whole mini fridge on top of this table and it still went up and down(slowly). of course i made sure to get the stronger motor desk and ensured weight capabilities.