Arducam 8MP HD Camera Module for Raspberry Pi 4/3/3B+/Zero 2W, IMX219 Sensor, 1080P, 500mm Flex Cable & Pi Zero Cable Included

These cameras do not work. I've tried every arrangement but they simply won't work. If I transfer the lens over to the PCB of a known working raspberry pi camera it works. PCB faulty.

Non mi va

Nice camera, pretty good value for the money. The camera takes nice pictures and works pretty seamlessly with the Pi (3B+ in my case). The ribbon cables are notoriously fickle for long distances, so if you plan on using a long cable look into an hdmi extender.

Working

Wonderful product at a fraction of the cost. Functions as expected and better in some cases.

Great little camera, but I had to do a ton of research online. I installed it on a Pi 5, MIPI DSI 0. Not only had to monkey around with the /boot/firmware/config.txt a number of times, but also had to mess with a few different libraries/packages. It comes with two ribbon cables and on a Pi 5, the one you want is the narrow one on both ends. What irks me beyond reproach, is the fact that there is no standard for these camera manufacturers. Installing the ribbon goes one way for one, but the other way on another. And as far as the web goes, when trying to find out which way to insert the ribbon, you'll find it described both ways at a number of sites. It's quite frustrating. After a few tries, and tearing the hell out of the Pi 5 CSI socket, I finally got it to work. For this camera, the ribbon contacts go towards the ethernet port on a Pi 5, and the contacts go towards the back side of the camera.