3D Printer Resin,10K Art-Engineering Toughness Non-Brittle New ABS-Like Resin for UV-Curing Photopolymer Rapid High Precision Low Odor LCD DLP SLA 405nm Resin (Black, 1000g)

no issues here... good strong resin with great quality... nice clarity as well.

This resin has been nearly as durable as Siraya tech's Blu while proving to be just as accurate if not marginally better. Using the Saturn 3 12k printer I saw better results from this (In terms of quality) when comparing the two. Strength is still on the side of Blu though

This resin produces strong, flexible 3d prints that are of good quality.

This stuff is the least brittle of the three JAMG HE resins I've tried. My exposure needed need a bump of about .8 seconds per layer, from what I've found (compared to the regular resins). MUCH less brittle. You probably have a decent chance of models surviving a fall with this resin. Small parts like swords and rifles have a little flex to them, which will make them last much, much longer.It costs more, but in line with other engineering resins, and cheaper than some. I'm good with paying more for a resin that gives my models an extended lifetime. Are you really saving money if you have to print the same thing more than once?As for the low odor and the 10k: I can't speak to the low odor, because my nose doesn't work well, and my printers live in the garage, so I never smell the resin anyway. The 10k is just a gimmick. There are no 10k printers at the moment, most are 6 or 8k, and it really wouldn't matter if there were.Right now, most printers work around 35-50um X/Y resolution. This determines the size of the voxel (think 3D pixel) that the printer can print. The smaller the resolution, the more detail in the print. It's like building with legos. You get better detail working with smaller blocks.The larger detail screens also have larger dimensions, so you wind up with the same X/Y resolution, sometimes even less than a printer with a smaller screen. If they said 'good down to 10um X/Y resolution', that might mean something, but saying it's 10k is just silly if you know how these printers work.On an interesting note, this came with a few gloves and a USB stick. The USB has a slicing software install on it (that I've never heard of), with a 12 month redemption for the paid version (for free). I have no need of this, so I reformatted it and now it's another USB for the printers to use. Can ALWAYS use another 4GB USB stick!!

I'm not really sure what the 10K is about but I do like this resin. Maybe has something to do with the size of the particles but I'm not entirely sure. I know they have 8K resin and 4K resin and things like that but like I said I'm not sure what the big difference is. With that being said this resin does print quite well. I do enjoy that the prints are not as brittle as a typical resin. I do believe you lose a little bit of detail when you use flexible resins but I didn't find that to be too big of an issue at this resin. The details on it were quite fine. I did not have any issues with it failed prints. As long as you do some calibration tests you should not have any issues with this. And and just because you had to calibrations with one resin doesn't mean you can forego on another resin. All resins have a different perfect print time and this includes residents from the same company that may be in different batches.

I'm a big fan of ABS-like resin. This would be my favorite over JH JAMG HE's standard and water washable "10k" resins. From the time of review this resin was being sold for $30.8 for 1k with similar cost for it's other two varieties. At that price it's comparable to my other favorite cheap ABS-like resins and does a great job. At a full price I'd compare it to specialty resins and at that level it doesn't cut it.The gain in strength is noticeable but in all honesty it's relative. I was happy to test this on a standard test miniature with a 3 ft drop and it broke, which is to be expected, but there were a lot less pieces to glue back together than a standard resin of the same model would have had. I prefer ABS-like because I want only 1 break vs 4.Odor wasn't the worst I've had but it's the worst of the three in this line that I tried. The test is to see if the family realizes I'm printing in the basement and they were somewhat aware.Concerning the "10k" claim. I've seen a 8k designed model printed on an 8k printer with 8k resin and there was a visual difference. Lots of finer detail to enjoy. You have to make sure the model you're printing was designed for 8k and you have an 8k printer though. 10k, who knows. I don't know anyone with a 10k printer in their home yet.Printed with an Elegoo Mars 2 @80-85 F

I tested 3 different resins from this company and if I had to buy one, it would be this one! This stuff was as tough or even tougher than the abs-like I tested it against. I can understand the higher price point as the durability seems to be ramped up to a 10 (hah or 10k...wink wink) compared to the normal resins. Detail was great and drop tests never broke. Of course I did not go up on the roof and drop them but from a good 5 ft they did not break. 99% ipa was used to wash as I still think it works better even on water-washable resins. Compared to the standard resins I did have to up the layer time a bit but that may have to do with the added strength in the resin itself or maybe I am not good enough to get it to print faster. It's a really good resin! Oh the odor was a little more than the standard I thought but still super low odor compared to regular resin.

I've only been printing with resin for a couple of months, so I have not tried a lot of resins yet, but, I can tell you that this is one of the better resins that I have used. One, for its hardness and two, for its minimal cleanup time after printing.Being an FDM print guy for several years now I have gotten used to sanding, well, with this resin the prints come out smooth and really detailed.Overall, I am very pleased with the results and the reduction in odor over previous brands that I have used.

Had a really good time printing with this resin, I have printed some miniatures with it and I loved of details comes out 😄