Woodworking Scribing Angle Ruler, Angles Protractor with 300mm Stainless Steel Marking Rule, Precision Engineer Woodworking Rulers for Line Marking, Circle Drawing, Length Measurement, DIY

Impressive build quality and very clear to read. Really handy tool with multiple uses - a must have for DIY and others

Quick and easy tool to use. It is very accurate if care is taken to set it up.

I decided that for my next woodworking project I wanted to try making a clock, so was going to need to mark out some wood at angles, and decided to have a punt on this since I'd never seen anything that looked quite like it!First impressions - very good. I've had a few items from this brand before and have generally been very satisfied with them (I discovered them when I bought some of these right angle clamps which I still use regularly to this day - https://amzn.to/3tI0Fh0)The rule is designed to fit (at 90 degrees) in the protractor with magnets, and contrary to some of the negative reviews I read beforehand, these seem to hold well for me. This provided a solid square.Because the rule has a cut out in it, that means you can also use this for drawing lines (while sliding the protractor part up your workpiece). At only 30cm long you're not going to be able to mark up anything too huge. But I suspect that's not the intended audience.But you can also take the rule out of the slot and rest it on top. Then a little tightening knob - which is initially stowed in the body of the protractor - can be used to tighten the rule at any angle. When I first tried using it an at an angle I wasn't using the bolt - thinking the magnets would be enough - which they weren't - perhaps that was what the other reviewer missed?The tightening knob itself is a bit fiddly to remove, and I think you could also easily lose the small rubber washer which is on its end which might make it less secure when tightened. (They, by the way, were my minor niggles!)Once the rule is attached by the knob all is plain sailing. And to be honest, I have so many other squares, I will probably leave this attached in this way for this purpose.The cut out in the rule is in the shape of an arrow which point to the angle you are making. I am slightly concerned that the markings on the protractor might wear off over time, but they are good and clear at the moment and I will update after more prolonged use.There are even a couple of helpful bits of info printed on the middle of the protractor - giving you ratios for different angles. Neat.So all in all, I think this is a useful little tool for a relatively modest cost. Thanks for reading this far!

Wow, this is extremely well made and a bargain for the price. The ruler is very clear to read and easy to use. I've tested it with a known square and it's bang on. Very accurate. The ruler is held in place with a very strong magnet, but it can slide to measure depth as well. 300mm long.

The build quality is impressive and the text is very clear to read. Comes with a bolt and 2 washer..Nice Angle ruler.

I am very impressed with this very handy tool.I make a lot of picture mounts and this has speeded up the marking out of the cutouts.It has also proved very useful for finding the centre of wooden discs that I use regularly.I’ve also successfully used it to mark out the discs without the need of a pair of compasses.The most important thing is having one affordable tool that can replace several others.

Handy gadget and from Preciva good quality

Simple easy to use piece of kit very handy.

Indispensable au atelier

So einen Winkelmesser muss jeder Handwerker haben!Ja, der Winkelmesser hat "nur" eine Genauigkeit von 1 Grad.ABER:1) die Skala ist gut lesbar, da sie eingelasert wurde2) Auf der hinteren Seite hat die Gradeinteilung einen Führungskanal, in welchem das Lineal mit einem starken Magneten gehalten wird. In dem "Modus" hat man im Prinzip eine einfache Schiebelehre oder Tiefenmesser.2.a) damit lässt sich ein 90° Winkel zeichen2.b) Tiefe oder Abstand messen2.c) Der Halter hat eine 90 Grad Einsparung, sodass auch in Ecken angezeichnet werden kann2.d) Es kann auch ein Kreis gezeichnet werden3.) den Stahlmass-Stab kann man mit der Schraube arretieren4.) wenn die Schraube nicht benötigt wird, dann wird die Schraube in die Gradeinteilung verschraubtIch kann es empfehlen und würde es wieder kaufen

Es lo qué buscaba, gramil, regla, y transportador de ángulos

Ho recentemente acquistato il goniometro angolare Preciva 0-180° con righello da 30 cm e devo dire che sono rimasto impressionato dalla sua qualità e precisione. Questo strumento è realizzato in acciaio inox, conferendo non solo una robustezza evidente ma anche una resistenza alla corrosione che promette una durata nel tempo.La scala graduata da 0 a 180 gradi è chiara e facile da leggere, consentendo misurazioni angolari accurate in ogni situazione. La presenza del righello da 30 cm sul lato del goniometro aggiunge un ulteriore livello di praticità, rendendo questo strumento una scelta versatile per una varietà di applicazioni tecniche.La precisione di questo goniometro è notevole, grazie alla sua costruzione solida e ai marcatori ben definiti sulla scala. Ho testato l'accuratezza confrontandola con altri strumenti simili, e il Preciva si è dimostrato all'altezza delle aspettative.L'impugnatura ergonomica rende comodo l'uso prolungato, e la ghiera di bloccaggio mantiene saldamente l'angolazione desiderata durante le misurazioni. Questo è particolarmente utile quando si lavora su progetti che richiedono precisione e dettaglio.In conclusione, il Preciva Goniometro Angolare 0-180° è uno strumento tecnico di alta qualità che offre precisione, durabilità e versatilità. La combinazione di acciaio inox resistente e righello integrato lo rende adatto a una vasta gamma di applicazioni, dalla carpenteria alla lavorazione del metallo. Consiglio vivamente questo goniometro a chiunque cerchi uno strumento affidabile e preciso per le proprie esigenze tecniche.

C'est bien pensé mais dommage qu'il n'y ait pas de système de blocage du réglet comme sur une équerre combinée. Cela rend le report de mesure aléatoire.Une fois cette amélioration apportée, ce sera parfait.