Detroit Axle - Front End 12pc Suspension Kit for Toyota Corolla 2003 2004 2005 2006 2007 2008, 2 Lower Control Arms 2 Lower Ball Joints 2 Sway Bar Links 4 Tie Rods 2 Boots & Bellow Replacement

Awesome kit for the price, great quality for the last 3 months, easy to align if you have the camber plates already, no noises or wobbles from my front end now. Just make sure to grease em up before installing. Easy install on my 2004 Ford ranger edge 4x4

Parts arrived very fast and in great shape. Good Quality and fit perfectly. Totally changed the way my truck rides and handles. I would definitely use Detroit Axle again. Great customer service as well.

Everything was perfect! Some of the bolts are different sizes so I had to make a couple trips to the store for specific wrenches, but everything fit and was a fantastic value. Hard install, but that's not the products fault. Got it aligned and the shop said good job. Note! You will need to order grease to put into the parts as well as the clamps for the inner tie rod rubber boot. Those aren't reusable.

This is a really high quality kit. Make sure you get an alignment after installing them. The included components honestly look better than the stock Nissan ones that managed to last 25 years. So as long as the bushings and ball joints hold up, I doubt I'll ever have to replace them again. Also, don't forget to grease all the greasable joints. They don't come prefilled with very much grease.

2006 Jeep Liberty (4x4 Renegade, 3.7L) Parts were fine, everything came in pre-greased which was nice. 3 complaints: 1.The lower ball joint did not want to sit completely flush in the lower control arm. It does the job and will work, but I can see this leading to premature wear of that ball joint. 2. I would have preferred a different tightening fastener/tie for the the inner tie rod boots. For one it did not include a tie/fastener for the boot to the arm itself. To be fair, I normally just use zip ties anyway for these boots, so not a big deal in my opinion. 3. Use of castle nuts. The lower ball joint and tie rod end both came with a castle nut to be used with them. At this day and age I feel there is much better options than using a castle nut. I would also recommend that extra cotter pins would be included with the package, as they can be easily lost or if the wrong number is included, can become a pain to find a direct replacement. I don't have any comments for the actual performance of these parts, I didn't notice anything when installing the parts that would lead me to believe they couldn't perform to or exceed OEM standard. I will say the upper control arms themselves seemed extremely well made. The powder coating (I'm assuming powder coating) was very well done.

exact fit to frontier pro 4x, quality same than oem.

I wouldn't recommend this to anyone! I bought this item because it claimed to contain all the replacement components for the worn parts on my suspension; It did not and some of the parts were of such poor quality as to be unusable. First, the stabilizers are unusable, if mine were functional , I would have just left them on the SUV. Instead, I had to purchase a new set of stabilizers from Advanced. My stabilizers were both completely shot, both ball joints on each had at least 1/8in of play. However, the new ones weren't a lot better. The grease boots on the new ones in this set wouldn't stay secured on the ball joint body, the upper one slipped off every time the joint flexed. The grease boots didn't have a retaining lip to keep it in place on a groove on the ball joint body. Thus, the ball joints would be exposed to the Texas dust and dirt, and it's doubtful that these joints would last the year. $30 to Advanced. Next, my steering tie rods also had a bunch of play also. I specifically bought this set because it came with tie rod boots to protect the steering from dust and dirt. However, once I replaced the tie rod ends, I noticed the kit didn't have boot fasteners to secure the boot ends to the tie rod or housing. I thought could reuse the retaining clamp on the small end, so of course one broke. So, $7 for CV boot tie straps and another $4 for snap on clamps for the small end. Look, if you are going to sell a comprehensive rebuild kit for suspensions, ensure that it's complete and that the quality of the components is better than what's currently on the vehicle. This kit was more trouble than it was worth. It cost almost $50 in replacement parts. Of course, now I wonder about the quality of all the other components I replaced. Definitely could not recommend! Update: I received a generic communication from Detroit Axle, no solutions and not even a sincere apology for the extract time, work and money they cost me. Below is a portion of my response to Detroit Axle. "Look, let's be realistic, a really sharp mechanic/diy-er might catch such things as missing boot bands and/or poorly designed grease boots on stabilizers upon the initial inspection. I did not! Once you break one ball joint on your vehicle, your committed to completing the job posthaste. You cannot wait for email exchanges and for Detroit Axle to make up their collect minds as to what to do with you. Given the additional fact that the original shipment was late, it's just better to bite the bullet and re-buy the parts from local parts dealers. Your product was in no way the cheapest option, but, supposedly it was the best fit for what I needed. As it turned out, your offering cost me about an additional day to complete work, I had to drive first to Weatherford (30 miles round trip) and then to Ft Worth (another 96 miles round trip), and about $50 additional costs. Detroit Axle is the expert is suspension parts and knows OEM quality and certainly knows exactly what parts are necessary to complete a particular suspension job. This is simple stuff, and Detroit Axle just seems not to take its customers' needs seriously. If my review is taken seriously, Detroit Axle should benefit in the eys of future customers. As an attorney, it always amazes me how defendant corporations use the information in plaintiff's pleading and actions for their own betterment and then feel that part of the defendant's compensation should be used internally by the defendant corporations to remake itself better and ultimately more successful."

i got this front end suspension kit for my ride, and man, it made a big difference. the old parts were all worn out, and my car was feelin kinda rough. swapped these in, and now the steering feels tight, no more weird shakes or clunks. install wasn’t too bad, just took my time with it. everything fit like it should, no hassle. been drivin for a bit now, and it’s holdin up real good. corners feel smoother, and the whole car just rides better. if your front end is shot, this is a solid way to fix it up without breakin the bank. nothin too fancy, just good parts that do the job. definitely worth grabbin if you need a refresh.